[why]
We want to streamline the calculations made when entering LFC.
Previously, the optimizations led to screen tearing and were backed out
to unblock development.

[how]
Integrate other calculations parameters, as well as screen tearing,
fixes with the original LFC calculation optimizations.
Signed-off-by: NAmanda Liu <amanda.liu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

YQ should be limited range for all cases.
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A hardcoded number is used today

[How]
Add definition for number of BL data points
Signed-off-by: NCamille Cho <Camille.Cho@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For some use cases we need to be able to adjust the maximum target bpp
allowed by DSC policy.

[How]
New interface dc_dsc_policy_set_max_target_bpp_limit
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Integer scaling is applied to MPO planes when downscaling,
MPO planes use variable taps and integer scaling sets taps=1

[How]
Disable integer scaling on MPO planes,
Disable integer scaling for downscaling planes
Signed-off-by: NAidan Yang <Aidan.Yang@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
CW0 and CW1 need to use physical addressing mode for dcn20 and dcn21.

The current code for dcn20 is using virtual.

[How]
We already program the DMCUB like this on dcn21 so we should just use
the same sequence for both.

Copy the dcn21 sequences into the dmjub_dcn20.c file and rename them.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
These values can differ per ASIC and should follow the full DC style
register programming model.

[How]
Define a common list and fill in the common list separately for
dcn20 and dcn21.

Unlike DC we're not using designated initializers for better compiler
compatibility since this resides in the DMUB service.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Lack of proper timing caused intermittent underflow on unplug external DP.
A previous fix was invalid and caused S0i3 regression, so had to be reverted.

[How]
When unlocking pipe, wait for no pipes to have flip pending before unlocking.
Signed-off-by: NNoah Abradjian <noah.abradjian@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add HDMI 2.x audio bandwidth check
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The earlier change: "check phy dpalt lane count config"
uses link encoder registers not defined properly.
That caused regression with mst-enabled display not
lighting up.

[How]
Add missing reg definitions.
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dc20 containes several FPU-dependent functions without proper FPU
kernel mode enable/disable wrappers.  Add the required wrappers
for both x86 and POWER.

This enables Navi DC20 support for POWER systems.

v2: fix compilation
Signed-off-by: NTimothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCN requires floating point support to operate.  Add the appropriate
x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN.

Note that the current DC20 code doesn't contain all required FPU
wrappers on x86 or POWER, so this patch is insufficient to fully
enable DC20 on POWER.

v2: s/X86_64/X86/g to retain previous behavior.
Signed-off-by: NTimothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce DC_FP_START()/DC_FP_END() macros to help enable floating
point kernel mode support across various architectures.

v2: move copyright update to commit which adds the changes
Signed-off-by: NTimothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu is MIT licensed.

Fixes: ec8f24b7 ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calling kzalloc() and related functions requires the
linux/slab.h header to be included:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c: In function 'dcn21_ipp_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:679:3: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
   kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL);

A lot of other headers also miss a direct include in this file,
but this is the only one that causes a problem for now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu is MIT licensed.

Fixes: ec8f24b7 ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calling kzalloc() and related functions requires the
linux/slab.h header to be included:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c: In function 'dcn21_ipp_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:679:3: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
   kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL);

A lot of other headers also miss a direct include in this file,
but this is the only one that causes a problem for now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

An initialization was added for two optional struct members.  One of
these is always present in the dcn20_resource file, but the other one
depends on CONFIG_DRM_AMD_DC_DSC_SUPPORT and causes a build failure if
that is missing:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:926:14: error: excess elements in struct initializer [-Werror]
   .num_dsc = 5,

Add another #ifdef around the assignment.

Fixes: c3d03c5a ("drm/amd/display: Include num_vmid and num_dsc within NV14's resource caps")
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid a compiler warning.
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It seems always request passive flip on RN due to incorrect compare
clock state to determine optization.

[How]
Instead of calling memcmp, compare clock state member to determine the
condition.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid a compiler warning.
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When a timeout occurs after a DEFER, some devices require more retries
than in the case of a regular timeout.

[How]
In a timeout occurrence, check whether a DEFER has occurred before the
timeout and retry MAX_DEFER_RETRIES retries times instead of
MAX_TIMEOUT_RETRIES.
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAbdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Value obtained from DV is not allowing 8k60 CTA mode with DSC to
pass, after checking real value being used in hw, find out that
correct value is 3600, which will allow that mode.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Screen tearing is present in tests when setting the frame rate to
certain fps

[How]
Revert previous optimizations for low frame rates.
Signed-off-by: NAmanda Liu <amanda.liu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
During mode transition steer fifo could overflow. Quite often it
recovers by itself, but sometimes it doesn't.

[how]
Add steer fifo reset before unblanking the stream. Also add a short
delay when resetting dig resync fifo to make sure register writes
don't end up back-to-back, in which case the HW might miss the reset
request.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The variable mismatch assignment error.

[How]
To use uint32_t replace it.
Signed-off-by: NBrandon Syu <Brandon.Syu@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DP spec requires 1000 symbols delay between the end of link training
and enabling FEC in the stream. Currently we are using 1 miliseconds
delay which is not accurate.

[how]
One lane RBR should have the maximum time for transmitting 1000 LL
codes which is 6.173 us. So using 7 microseconds delay instead of
1 miliseconds.
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
new sr and pstate latencies are optimized for the case when we are not
using lpddr4 memory

[How]
have two different wm tables, one for the lpddr case and one for
non lpddr case
Signed-off-by: NJoseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In dc_link_is_dp_sink_present, if dal_ddc_open fails, then
dal_gpio_destroy_ddc is called, destroying pin_data and pin_clock. They
are created only on dc_construct, and next aux access will cause a panic.

[How]
Instead of calling dal_gpio_destroy_ddc, call dal_ddc_close.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When video_memory_type bw_params->vram_type
is assigned, wedistinguish between Ddr4MemType and LpDdr4MemType.
Because of this we will never report that we are using
LpDdr4MemType and never re-purpose WM set D

[How]
populate bios integrated info for renoir by adding the
revision number for renoir and use that integrated info
table instead of of asic_id to get the vram type
Signed-off-by: NJoseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
pstate_latency_us never gets updated from the hard coded value
in rn_clk_mgr.c

[how]
update the wm table's values before we do calculations with them
Signed-off-by: NJoseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
On ASICs where number of DSCs is the same as OPPs there's no need
for DSC resource management. Mappping 1-to-1 fixes mode-set- or S3-
-related issues for such platforms.

[how]
Map DSC resources 1-to-1 to pipes only if number of OPPs is the same
as number of DSCs. This will still keep other ASICs working.
A follow-up patch to fix mode-set issues on those ASICs will be
required if testing shows issues with mode set.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DF team has produced more optimized latency numbers.

[How]
Add sr latencies to the wm table, use different latencies
for different wm sets.
Also fix bb override from registery key for these latencies.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To quickly validate whether DMCUB is running and accepting commands for
offload testing we want to intercept a common sequence as part of
modeset programming.

[How]
OTG enable will cause the most impact in terms of golden register
changes and it's a single register write.

This approach was previously done in dcn10 code when it was shared with
dcn20 but it wasn't ported over to the dcn20 code.

Port over start, execute and wait sequence into dcn20_optc.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When setting lttpr mode, the new mode to bet is not logged properly.

[How]
Update log message to show the right mode.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In preparation for further changes
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It seems always request passive flip on RN due to incorrect compare
clock state to determine optization.

[How]
Instead of calling memcmp, compare clock state member to determine the
condition.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When a timeout occurs after a DEFER, some devices require more retries
than in the case of a regular timeout.

[How]
In a timeout occurrence, check whether a DEFER has occurred before the
timeout and retry MAX_DEFER_RETRIES retries times instead of
MAX_TIMEOUT_RETRIES.
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAbdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently we require HDR_MULT >= 1.0
There are scenarios where we need < 1.0

[How]
Only guard against 0 - it will black-screen image.
It is up to higher-level logic to decide what HDR_MULT
values are allowed in each particular case.
Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>