- 12 5月, 2008 11 次提交
-
-
由 Ralf Baechle 提交于
56a6b1eb was a bit too conservative and left __ilog2 around which is only used as an internal function for other bitops. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Only MIPS32 and MIPS64 CPUs implement clz/dclz. Therefore don't export __ilog2() for non MIPS32/MIPS64 cpus and use generic __fls bitop code for these cpus. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - initialization of a 'static' variable to 0; - space after opening and before closing parentheses; - missing space between 'for' and opening parenthesis; - macros with complex values not enclosed in parentheses; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used; - line over 80 characters. In addition to these changes, also do the following: - mention DBAu1200 board in the Makefile; - replace the group of #include/#ifdef directives by a single #include <au1xxx.h> since this header contains the needed stuff; - properly indent the blocks; - insert spaces between operator and its operands, remove excess spaces there; - remove needless parentheses and add some for clarity; - replace numeric literals/expressions with the matching macros; - remove space after the type cast's closing parenthesis; - reduce pb1200_setup_cascade() to the single 'return' statement; - reduce the number of printed empty lines in the so-called CPLD workaround; - remove #undef AU1X00_EXTERNAL_INT since that macro is not defined anywhere; - replace spaces after the macro name with tabs in the #define directives; - remove excess tabs after the macro name in the #define directives; - fix typo in the BCSR_RESETS_PWMR1mUX macro's name; - group all Pb1200 PCMCIA definitions together; - put the function's result type and name/parameters on the same line; - insert missing and remove excess new lines; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line and/or adding space/asterisk on their left side; - fix typos/errors, capitalize acronyms, etc. in the comments; - combine some comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix a few errors and warnings given by checkpatch.pl: - macros with complex values not enclosed in parentheses; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - replace numeric literals with the matching macros; - properly indent the code and the array initializers; - insert spaces between operator and its operands, also remove excess spaces there; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the array initializers; - replace spaces after the macro name with tabs in the #define directives, also sometimes insert space there for better looks; - remove excess tabs after the macro name in the #define directives; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - replace numeric literals/expressions with the matching macros; - insert spaces between operator and its operands; - properly indent the code and the array initializers; - remove useless #if dirctive from board_setup(); - remove needless parentheses; - remove unneeded type casts; - remove excess new lines; - make hexadecimal literals all lower case; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the array initializers; - replace spaces after the macro name with tabs in the #define directives, also sometimes insert space there for better looks; - fix typos/errors, capitalize acronyms, etc. in the comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - space between asterisk and variable name; - use of C99 // comments; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - properly indent the code; - remove space after the type cast's closing parenthesis; - replace numeric literals/expressions with the matching macros; - replace spaces after the macro name with tabs in the #define directives, and sometimes insert spaces there; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - brace not on the same line with condition in the 'switch' statement; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - properly indent the 'switch' statement; - remove needless parentheses; - insert spaces between operator and its operands; - replace numeric literals/expressions with the matching macros; - remove useless #if dirctive from board_setup(); - remove unneeded numeric literal type casts; - remove space after the type cast's closing parenthesis; - replace spaces after the macro name with tabs in the #define directives, and sometimes insert spaces there; - remove excess new lines; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first/last line; - combine some comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - macros with complex values not enclosed in parentheses; - leading spaces instead of tabs; - printk() without KERN_* facility level; - using simple_strtol() where strict_strtol() could be used; - line over 80 characters. In addition to these changes, also do the following: - initialize variable instead of assigning value later where it makes sense; - insert spaces between operator and its operands, also remove excess spaces there; - remove unneeded numeric literal type casts; - remove needless parentheses; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the array initializers; - replace spaces after the macro name with tabs in the #define directives; - remove excess tabs after the macro name in the #define directives; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first/last line; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - space after opening and before closing parentheses; - opening brace following 'struct' not on the same line; - leading spaces instead of tabs; - use of C99 // comments; - macros with complex values not enclosed in parentheses; - missing space between the type and asterisk in a variable declaration; - space between asterisk and function name; - including <asm/io.h> instead of <linux/io.h> and <asm/irq.h> instead of <linux/irq.h>; - use of '__inline__' instead of 'inline'; - space between function name and opening parenthesis; - line over 80 characters. In addition to these changes, also do the following: - remove needless parentheses; - insert spaces between operator and its operands; - replace spaces after the macro name with tabs in the #define directives and after the type in the structure field declarations; - remove excess tabs after the macro name in the #define directives and in the 'extern' variable declarations; - remove excess spaces between # and define for the SSI_*_MASK macros to align with other such macros; - put '||' operator on the same line with its first operand; - properly indent multi-line function prototypes; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line and/or adding space/asterisk on their left side; - make two-line comments that only have one line of text one-line; - convert the large multi-line comment in au1xxx_ide.h into several one-liners, replace spaces with tabs there; - fix typos/errors, capitalize acronyms, etc. in the comments; - insert missing and remove excess new lines; - update MontaVista copyright; - remove Pete Popov's and Steve Longerbeam's old email addresses... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This is to clarify that GCC_IMM_ASM does not take an argument as the context of the macro's invocation seems to imply. As suggested by Maciej W. Rozycki (macro@linux-mips.org). Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin D. Kissell 提交于
Signed-off-by: NKevin D. Kissell <kevink@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 5月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes the following compile error caused by commit 23cf11dd (mips: types: use <asm-generic/int-*.h> for the mips architecture): <-- snip --> ... CC kernel/bounds.s In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/types.h:12, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/page-flags.h:8, from /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/bounds.c:9: include2/asm/types.h:56:2: error: #endif without #if make[2]: *** [kernel/bounds.s] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 03 5月, 2008 1 次提交
-
-
由 H. Peter Anvin 提交于
This modifies <asm-mips/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org>
-
- 01 5月, 2008 1 次提交
-
-
由 Roman Zippel 提交于
Rename div64_64 to div64_u64 to make it consistent with the other divide functions, so it clearly includes the type of the divide. Move its definition to math64.h as currently no architecture overrides the generic implementation. They can still override it of course, but the duplicated declarations are avoided. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Avi Kivity <avi@qumranet.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 4月, 2008 1 次提交
-
-
由 Jeff Dike 提交于
Lots of asm-*/futex.h call pagefault_enable and pagefault_disable, which are declared in linux/uaccess.h, without including linux/uaccess.h. They all include asm/uaccess.h, so this patch replaces asm/uaccess.h with linux/uaccess.h. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 4月, 2008 19 次提交
-
-
由 Harvey Harrison 提交于
Unaligned access is ok for the following arches: cris, m68k, mn10300, powerpc, s390, x86 Arches that use the memmove implementation for native endian, and the byteshifting for the opposite endianness. h8300, m32r, xtensa Packed struct for native endian, byteshifting for other endian: alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh m86knommu is generic_be for Coldfire, otherwise unaligned access is ok. frv, arm chooses endianness based on compiler settings, uses the byteshifting versions. Remove the unaligned trap handler from frv as it is now unused. v850 is le, uses the byteshifting versions for both be and le. Remove the now unused asm-generic implementation. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergei Shtylyov 提交于
Since both the IDE interface and SMC 91C111 Ethernet chip are on-board devices, not SOC devices, move the platform device registration form the common to the board specific code. While at it, remove semicolon (which didn't break compilation only by chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming: - change 'au1200_ide0_' variable name prefix to the mere 'ide_'; - change 'smc91x_' variable name prefix to 'smc91c111_' since that's the name of the chip used on the boards; - drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet on-board devices; - change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of the macros describing the Ethernet chip for consistency with the IDE macros; - change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is indeed a shift count) in the names of the macros describing the IDE interface. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
asm-mips/mach-ip27/topology.h must #include <asm-generic/topology.h> This fixes the following compile error: ... CC kernel/sched.o /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'find_next_best_node': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: implicit declaration of function 'node_to_cpumask_ptr' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: '__tmp__' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'sched_domain_node_span': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7047: error: 'nodemask' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7048: warning: ISO C90 forbids mixed declarations and code /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7059: error: implicit declaration of function 'node_to_cpumask_ptr_next' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function '__build_sched_domains': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7605: error: 'pnodemask' undeclared (first use in this function) make[2]: *** [kernel/sched.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Declare board_bind_eic_interrupt, board_watchpoint_handler in traps.h * Make msc_bind_eic_interrupt static and fix its argument types. * Make msc_levelirq_type, msc_edgeirq_type static. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Add DECstation I/O ASIC clocksource Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Do not use non-standard I/O accessors, such as reg_rd08, etc. * Kill unnecessary wbflush() * Kill tx4938_mips.h * Kill unnecessary includes Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Use generic txx9 gpio (and gpiolib) for JMR3927 board. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Use generic txx9 gpio (and gpiolib) for RBHMA4500 board. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This is a board-independent TXx9 gpio API implementation using gpiolib. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
If gpiolib was selected, asm-generic/gpio.h provides some prototypes for gpio API and implementation helpers. With this patch, platform code can implement its GPIO API using gpiolib without custom gpio.h file. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Defer the unmasking of the count/compare interrupt (IRQ5) till the clockevent driver initialization: - only enable the cascaded IRQs 0 thru 4 in arch_init_irq(); kill the ALLINTS macro -- this change is blessed by AMD as I saw it in their own patch; :-) - do not force IRQ5 enabled in plat_time_init() if PM is enabled and there's no 32 KHz crystal. Update the copyrights (taking into account my prior changes), also removing Pete Popov's old email... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Daniel Laird 提交于
Signed-off-by: Ndaniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Slightly tacky, but there is a precedent in the sparc archirecture code. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Still, only the 4K may actually implement it. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 28 4月, 2008 2 次提交
-
-
由 Yoichi Yuasa 提交于
Add VR41xx SIU setup for serial console. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NCarsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 4月, 2008 2 次提交
-
-
Always use "fast" MWDMA support and remove dma_{black,white}_list (they were based on completely bogus ->ide_dma_check implementation which didn't set neither the host controller timings nor the device for the desired transfer mode). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Alexander van Heukelum 提交于
Implement __fls on all 64-bit archs: alpha has an implementation of fls64. Added __fls(x) = fls64(x) - 1. ia64 has fls, but not __fls. Added __fls based on code of fls. mips and powerpc have __ilog2, which is the same as __fls. Added __fls = __ilog2. parisc, s390, sh and sparc64: Include generic __fls. x86_64 already has __fls. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 4月, 2008 2 次提交
-
-
* Use ide_default_irq() instead of ide_init_default_irq() in ide_generic host driver (so the correct IRQ is always set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI). * Remove no longer needed ide_init_default_irq() macro. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-