Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 abd14cc0 编写于 作者: S Sergei Shtylyov 提交者： Ralf Baechle
浏览文件
操作

[MIPS] DBAu1xx0 code style cleanup 

Fix several errors and warnings given by checkpatch.pl:

- macros with complex values not enclosed in parentheses;

- leading spaces instead of tabs;

- printk() without KERN_* facility level;

- using simple_strtol() where strict_strtol() could be used;

- line over 80 characters.

In addition to these changes, also do the following:

- initialize variable instead of assigning value later where it makes sense;

- insert spaces between operator and its operands, also remove excess spaces
  there;

- remove unneeded numeric literal type casts;

- remove needless parentheses;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array initializers;

- replace spaces after the macro name with tabs in the #define directives;

- remove excess tabs after the macro name in the #define directives;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first/last line;

- update MontaVista copyright;

- remove Pete Popov's old email address...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 a9633279
隐藏空白更改
内联 并排
Showing with 92 addition and 93 deletion
arch/mips/au1000/db1x00/Makefile
浏览文件 @ abd14cc0
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
# Copyright 2000, 2008 MontaVista Software Inc.
# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
arch/mips/au1000/db1x00/board_setup.c
浏览文件 @ abd14cc0
......@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -37,49 +36,49 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
/* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
u32 pin_func;
u32 pin_func = 0;
pin_func = 0;
/* not valid for 1550 */
#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* Set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* power off until the driver is in use */
/* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
/* enable GPIO[31:0] inputs */
/* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
/* GPIO[20] is output, tristate the other input primary GPIO's */
au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
/* GPIO[20] is output, tristate the other input primary GPIOs */
au_writel(~(1 << 20), SYS_TRIOUTCLR);
/* set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
/* Set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
/* set GPIO[215:211] for LED's */
pin_func |= (u32)((5<<2));
/* Set GPIO[215:211] for LEDs */
pin_func |= 5 << 2;
/* set GPIO[214:213] for more LED's */
pin_func |= (u32)((5<<12));
/* Set GPIO[214:213] for more LEDs */
pin_func |= 5 << 12;
/* set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= (u32)((3<<17));
/* Set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
/* Enable speaker amplifier. This should
/*
* Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
......@@ -89,21 +88,21 @@ void __init board_setup(void)
au_sync();
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk("AMD Alchemy Au1500/Db1500 Board\n");
printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk("AMD Alchemy Au1100/Db1100 Board\n");
printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
printk("AMD Alchemy Bosporus Board\n");
printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
printk("AMD Alchemy Mirage Board\n");
printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk("AMD Alchemy Au1550/Db1550 Board\n");
printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
arch/mips/au1000/db1x00/init.c
浏览文件 @ abd14cc0
......@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -49,8 +48,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
......@@ -58,6 +57,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
memsize = simple_strtol(memsize_str, NULL, 0);
memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/au1000/db1x00/irqmap.c
浏览文件 @ abd14cc0
......@@ -32,32 +32,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
......
include/asm-mips/mach-db1x00/db1x00.h
浏览文件 @ abd14cc0
/*
* AMD Alchemy DB1x00 Reference Boards
* AMD Alchemy DBAu1x00 Reference Boards
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
......@@ -32,26 +31,26 @@
#ifdef CONFIG_MIPS_DB1550
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_KSEG1_ADDR 0xAF000000
#define NAND_PHYS_ADDR 0x20000000
#define BCSR_KSEG1_ADDR 0xAF000000
#define NAND_PHYS_ADDR 0x20000000
#else
#define BCSR_KSEG1_ADDR 0xAE000000
#endif
/*
* Overlay data structure of the Db1x00 board registers.
* Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
* Overlay data structure of the DBAu1x00 board registers.
* Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
*/
typedef volatile struct
{
......@@ -138,18 +137,19 @@ typedef volatile struct
#define BCSR_SWRESET_RESET 0x0080
/* PCMCIA Db1x00 specific defines */
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
/* PCMCIA DBAu1x00 specific defines */
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
/* SD controller macros */
/*
* Detect card.
* SD controller macros
*/
/* Detect card. */
#define mmc_card_inserted(_n_, _res_) \
do { \
BCSR * const bcsr = (BCSR *)0xAE000000; \
......@@ -176,10 +176,10 @@ typedef volatile struct
unsigned long mmc_pwr, mmc_wp, board_specific; \
if ((_n_)) { \
mmc_pwr = BCSR_BOARD_SD1_PWR; \
mmc_wp = BCSR_BOARD_SD1_WP; \
mmc_wp = BCSR_BOARD_SD1_WP; \
} else { \
mmc_pwr = BCSR_BOARD_SD0_PWR; \
mmc_wp = BCSR_BOARD_SD0_WP; \
mmc_wp = BCSR_BOARD_SD0_WP; \
} \
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
if (!(board_specific & mmc_wp)) {/* low means card present */ \
......@@ -190,17 +190,19 @@ typedef volatile struct
} while (0)
/* NAND defines */
/* Timing values as described in databook, * ns value stripped of
/*
* NAND defines
*
* Timing values as described in databook, * ns value stripped of the
* lower 2 bits.
* These defines are here rather than an SOC1550 generic file because
* These defines are here rather than an Au1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
#define NAND_T_H (18 >> 2)
#define NAND_T_PUL (30 >> 2)
#define NAND_T_SU (30 >> 2)
#define NAND_T_WH (30 >> 2)
#define NAND_T_H (18 >> 2)
#define NAND_T_PUL (30 >> 2)
#define NAND_T_SU (30 >> 2)
#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
......@@ -208,16 +210,15 @@ typedef volatile struct
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
#define NAND_CS 1
#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
#define NAND_CS 1
/* should be done by yamon */
#define NAND_STCFG 0x00400005 /* 8-bit NAND */
#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
/* Should be done by YAMON */
#define NAND_STCFG 0x00400005 /* 8-bit NAND */
#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_DB1X00_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或