driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For device version V3, it supports queue bonding, which can
identify the tuple information of TCP stream, and create flow
director rules automatically, in order to keep the tx and rx
packets are in the same queue pair. The driver set FD_ADD
field of TX BD for TCP SYN packet, and set FD_DEL filed for
TCP FIN or RST packet. The hardware create or remove a fd rule
according to the TX BD, and it also support to age-out a rule
if not hit for a long time.

The queue bonding mode is default to be disabled, and can be
enabled/disabled with ethtool priv-flags command.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc4
commit 04b6ba14
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=04b6ba143521

----------------------------------------------------------------------

This patch add support for external loopback test.
The successful test need the link is up with duplex full. The
driver do external loopback first, and then the whole offline
test.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 08aa17a0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=08aa17a0c185

----------------------------------------------------------------------

For some new devices, the FEC mode can not be set to OFF in speed 200G.
In order to flexibly adapt to all types of devices, driver queries
fec ability from firmware to decide whether OFF mode can be supported.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 5c4f7284
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5c4f72842d1d

----------------------------------------------------------------------

This patch supports llrs fec mode in speed 200G for some new devices, and
suppoprts querying llrs fec ability from firmware.
Signed-off-by: NHao Lan <lanhao@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit cfd80687
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cfd80687a538

----------------------------------------------------------------------

Currently tx push is also a ring param. So the original ring param print
info in hns3_is_ringparam_changed should be adjusted.

Fixes: 07fdc163 ("net: hns3: refactor hns3_set_ringparam()")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit a4fe9b6d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a4fe9b6db6f9

----------------------------------------------------------------------

When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer()
will return directly and priv->ring->tx_spare->len is uninitialized,
then print function access priv->ring->tx_spare->len will cause
this issue.

When set tx-buf-size as 0 by ethtool, the print function will
print 0 directly and not access priv->ring->tx_spare->len.

Fixes: 2373b35c ("net: hns3: add log for setting tx spare buf size")
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 31693d02
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=31693d02b06e

----------------------------------------------------------------------

There is a spelling mistake in a netdev_info message. Fix it.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220421085546.321792-1-colin.i.king@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 29c17cb6
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=29c17cb67271

----------------------------------------------------------------------

Remove unnecessary line wrap for hns3_set_tunable to improve
function readability.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 2373b35c
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2373b35c24ff

----------------------------------------------------------------------

For the active tx spare buffer size maybe changed according
to the page size, so add log to notice it.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 07fdc163
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=07fdc163ac88

----------------------------------------------------------------------

Use struct hns3_ring_param to replace variable new/old_xxx and
add hns3_is_ringparam_changed() to judge them if is changed to
improve code readability.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 286c61e7
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=286c61e72797

----------------------------------------------------------------------

For DEVICE_VERSION_V2, the hardware does not support the CQE mode.
So add capability bit for coalesce CQE mode and add parameter check
for it in ethtool.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-net-5.17
commit 4d07c593
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4YXIM
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4d07c5936c25

----------------------------------------------------------------------

When pci devices init failed and haven't reinit, priv->ring is
NULL and hns3_set/get_ringparam() will access priv->ring. it
causes call trace.

So, add NULL pointer check for hns3_set/get_ringparam() to
avoid this situation.

Fixes: 5668abda ("net: hns3: add support for set_ringparam")
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-net-5.17
commit f5cd6016
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4YXIM
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5cd60169f98

----------------------------------------------------------------------

When pci device reset failed, it does uninit operation and priv->ring
is NULL, it causes accessing NULL pointer error.

Add netdev reset check for hns3_set_tunable() to fix it.

Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-net-5.17
commit 87783721
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4YXIM
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=877837211802

----------------------------------------------------------------------

When use ethtoool set tx copybreak buf size to a large value
which causes order exceeding 10 or memory is not enough,
it causes allocating tx copybreak buffer failed and print
"the active tx spare buf is 0, not enabled tx spare buffer",
however, use --get-tunable parameter query tx copybreak buf
size and it indicates setting value not 0.

So, it's necessary to change the print value from setting
value to 0.

Set kinfo.tx_spare_buf_size to 0 when set tx copybreak buf size failed.

Fixes: e445f08a ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver")
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4QHSV

----------------------------------------------------------------------

Add a control private flag in ethtool for enable/disable
TX push feature.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4QHSV

----------------------------------------------------------------------

For the device that supports the TX push capability, the BD can
be directly copied to the device memory. However, due to hardware
restrictions, the push mode can be used only when there are no
more than two BDs, otherwise, the doorbell mode based on device
memory is used.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.16-rc3
commit 82229c4d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4M1HB
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=82229c4dbb8a

----------------------------------------------------------------------

Currently, HNS3 driver doesn't clear the reset flags of components after
successfully executing reset, it causes userspace info of
"Components reset" and "Components not reset" is incorrect.

So fix this problem by clear corresponding reset flag after reset process.

Fixes: ddccc5e3 ("net: hns3: add support for triggering reset by ethtool")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e65a0231
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4M1HB
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e65a0231d2ca

----------------------------------------------------------------------

Rx buf len is for rx BD buffer size, support setting it via ethtool -G
parameter and getting it via ethtool -g parameter.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 74624944
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4M1HB
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7462494408cd

----------------------------------------------------------------------

Add two new parameters kernel_ringparam and extack for
.get_ringparam and .set_ringparam to extend more ring params
through netlink.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
(fix conflicts: remove unsupported ethernets and ops)
(fix conflicts: adapt spnic and txgbe for interface change)
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e445f08a
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4M1HB
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e445f08af2b1

----------------------------------------------------------------------

Tx copybreak buf size is used for tx copybreak feature, the feature is
used for small size packet or frag. It adds a queue based tx shared
bounce buffer to memcpy the small packet when the len of xmitted skb is
below tx_copybreak(value to distinguish small size and normal size),
and reduce the overhead of dma map and unmap when IOMMU is on.

Support setting it via ethtool --set-tunable parameter and getting
it via ethtool --get-tunable parameter.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 85879f13
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=85879f131d78

----------------------------------------------------------------------

Fix kernel-doc warnings and spacing in hns3_ethtool.c:

hns3_ethtool.c:246: warning: No description found for return value of 'hns3_lp_run_test'
hns3_ethtool.c:408: warning: expecting prototype for hns3_nic_self_test(). Prototype was for hns3_self_test() instead
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: Nkernel test robot <lkp@intel.com>
Cc: Peng Li <lipeng321@huawei.com>
Cc: Guangbin Huang <huangguangbin2@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
(fix conflicts: remove hns3_do_selftest's fix due to a previous fix: 65b017dc "net: hns3: fix prototype warning")
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e519d9ea
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4I7P7
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e519d9ea62e8

----------------------------------------------------------------------

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deSigned-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.71
commit 071febc37e066c9bd6f417179b4f763d0b13437b
bugzilla: 182981 https://gitee.com/openeuler/kernel/issues/I4I3KD

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=071febc37e066c9bd6f417179b4f763d0b13437b

--------------------------------

[ Upstream commit 27bf4af6 ]

Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.

However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.

Fixes: bcc26e8d ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.71
commit 8e89876c84b23d79a7ea58c3f5c300695a227570
bugzilla: 182981 https://gitee.com/openeuler/kernel/issues/I4I3KD

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8e89876c84b23d79a7ea58c3f5c300695a227570

--------------------------------

[ Upstream commit a1e144d7 ]

Correct a report warning in hns3_ethtool.c
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 4c8dab1c
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4c8dab1c709c5a715bce14efdb8f4e889d86aa04

----------------------------------------------------------------------

This patch reconstructs function hns3_self_test to reduce the code
cycle complexity and make code more concise.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit cce1689e
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cce1689eb58d2fe3219da2ecd27cef8e644c4cc6

----------------------------------------------------------------------

Add support in ethtool for switching EQE/CQE mode.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f3ccfda1
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f3ccfda1931977b80267ba54070a1aeafa18f6ca

----------------------------------------------------------------------

In order to support more coalesce parameters through netlink,
add two new parameter kernel_coal and extack for .set_coalesce
and .get_coalesce, then some extra info can return to user with
the netlink API.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
(fix conflicts: adapt diffs for qede/qlge/stmmac/netdevsim/txgbe)
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f5c2b9f0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5c2b9f0fc078308a88de807d60cd4e352a165fc

----------------------------------------------------------------------

In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit edb40bbc
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=edb40bbc17eb589beb3cbd672d341e1505d6cdb1

----------------------------------------------------------------------

Add a new file hns3_ethtool.h, and move struct type definitions from
hns3_ethtool.c to hns3_ethtool.h.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ddccc5e3
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ddccc5e368a33daeb6862192d4dca8e59af9234a

----------------------------------------------------------------------

Currently, four reset types are supported for the HNS3 ethernet
driver: IMP reset, global reset, function reset, and FLR. Only
FLR can now be triggered by the user. To restore the device when
an exception occurs, add support for triggering reset by ethtool.

Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to
trigger the IMP | global | function reset manually.

In addition, VF can only trigger function reset.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 99f6b5fb
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=99f6b5fb5f63cf69c6e56bba8e5492c98c521a63

----------------------------------------------------------------------

Currently rx page will be reused to receive future packet when
the stack releases the previous skb quickly. If the old page
can not be reused, a new page will be allocated and mapped,
which comsumes a lot of cpu when IOMMU is in the strict mode,
especially when the application and irq/NAPI happens to run on
the same cpu.

So allocate a new frag to memcpy the data to avoid the costly
IOMMU unmapping/mapping operation, and add "frag_alloc_err"
and "frag_alloc" stats in "ethtool -S ethX" cmd.

The throughput improves above 50% when running single thread of
iperf using TCP when IOMMU is in strict mode and iperf shares the
same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500).
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 7459775e
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7459775e9f658a2d5f3ff9d4d087e86f4d4e5b83

----------------------------------------------------------------------

Using the queue based tx buffer, it is also possible to allocate a
sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec
in order to support the dma_map_sg() to decreases the overhead of
IOMMU mapping and unmapping.

Firstly, it reduces the number of buffers. For example, a tcp skb
may have a 66-byte header and 3 fragments of 4328, 32768, and 28064
bytes. With this patch, dma_map_sg() will combine them into two
buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU.

Secondly, it reduces the number of dma mapping and unmapping. All the
original 4 buffers are mapped only once rather than 4 times.

The throughput improves above 10% when running single thread of iperf
using TCP when IOMMU is in strict mode.
Suggested-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 907676b1
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=907676b130711fd1f627824559e92259db2061d1

----------------------------------------------------------------------

when the packet or frag size is small, it causes both security and
performance issue. As dma can't map sub-page, this means some extra
kernel data is visible to devices. On the other hand, the overhead
of dma map and unmap is huge when IOMMU is on.

So add a queue based tx shared bounce buffer to memcpy the small
packet when the len of the xmitted skb is below tx_copybreak.
Add tx_spare_buf_size module param to set the size of tx spare
buffer, and add set/get_tunable to set or query the tx_copybreak.

The throughtput improves from 30 Gbps to 90+ Gbps when running 16
netperf threads with 32KB UDP message size when IOMMU is in the
strict mode(tx_copybreak = 2000 and mtu = 1500).
Suggested-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0bf5eb78
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0bf5eb788512187b744ef7f79de835e6cbe85b9c

----------------------------------------------------------------------

Adds PTP support for HNS3 ethernet driver.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2ba30662
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ba306627f5950c9a7850f3b0499d39e522dc249

----------------------------------------------------------------------

Previously, with hardware limitation, the port VLAN filter are
effective for both PF and its VFs simultaneously, so a single
function is not able to enable/disable separately, and the VLAN
filter state is default enabled. Now some device supports each
function to bypass port VLAN filter, then each function can
switch VLAN filter separately. Add capability flag to check
whether the device supports modify VLAN filter state. If flag
on, user will be able to modify the VLAN filter state by ethtool
-K.

Furtherly, the default VLAN filter state is also changed
according to whether non-zero VLAN used. Then the device can
receive packet with any VLAN tag if only VLAN 0 used.

The function hclge_need_enable_vport_vlan_filter() is used to
help implement above changes. And the VLAN filter handle for
promisc mode can also be simplified by this function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc4
commit 73a13d8d
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=73a13d8dbe33e53a12400f2be0f5af169816c67f

----------------------------------------------------------------------

Currently, when adaptive is on, the user's coalesce configuration
may be overwritten by the dynamic one. The reason is that user's
configurations are saved in struct hns3_enet_tqp_vector whose
value maybe changed by the dynamic algorithm. To fix it, use
struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to
save and get the user's configuration.

BTW, operations of storing and restoring coalesce info in the reset
process are unnecessary now, so remove them as well.

Fixes: 434776a5 ("net: hns3: add ethtool_ops.set_coalesce support to PF")
Fixes: 7e96adc4 ("net: hns3: add ethtool_ops.get_coalesce support to PF")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit a1e144d7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a1e144d7dc3c55aa4d451e3a23cd8f34cd65ee01

----------------------------------------------------------------------

Correct a report warning in hns3_ethtool.c
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit f5f2b3e4
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5f2b3e4dcc0e944dc33b522df84576679fbd8eb

----------------------------------------------------------------------

IMP(Intelligent Management Processor) firmware add a new feature
to take control of PHYs for some new devices, PF driver adds
support for this feature.

Driver queries device's capability to check whether IMP supports
this feature, it will tell IMP to enable this feature by firmware
compatible command if it is supported.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit e8194f32
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e8194f3262055bc2e6e2b7c02f9de2c3d2ef7fc9

----------------------------------------------------------------------

For maintainability and compatibility, add support to use pause
capability queried from firmware, and add debugfs support to dump
this capability.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit c5aaf176
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c5aaf1761883bbc02a8a158a0bc7a5950ad8542b

----------------------------------------------------------------------

Fix an issue where the formatting symbol of the formatting input and
output function does not match the actual type.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>