driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

On version HNAE3_DEVICE_VERSION_V2, the tcam table entry of the FD is
obtained by traversing the list recorded by the driver.

On version HNAE3_DEVICE_VERSION_V3, a new usage mode of FD is supported,
called Queue bond mode. In this mode, the hardware automatically creates
rules and the driver does not record the flow table entry.

So we needs to check the validity of the entry by traversing the entire
hardware entry to dump out the QB tcam table.
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

When serdes lane support setting 25Gb/s、50Gb/s speed and user wants to
set port speed as 50Gb/s, it can be setted as one 50Gb/s serdes lane or
two 25Gb/s serdes lanes.

So, this patch adds support to query and set lane number by sysfs
to satisfy this scenario.
Signed-off-by: NHao Chen <chenhao418@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For the fd rule of queue bonding is created by hardware
automatically, the driver needs to specify the fd counter
for each function, then it's available to query how many
times the queue bonding fd rules hit.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For device version V3, the hardware supports queue bonding
mode. VF can not enable queue bond mode unless PF enables it.
So VF needs to query whether PF support queue bonding mode
when initializing, and query whether PF enables queue bonding
mode periodically. For the resource limited, to avoid a VF
occupy to many FD rule space, only trust VF is allowed to enable
queue bonding mode.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

For device version V3, it supports queue bonding, which can
identify the tuple information of TCP stream, and create flow
director rules automatically, in order to keep the tx and rx
packets are in the same queue pair. The driver set FD_ADD
field of TX BD for TCP SYN packet, and set FD_DEL filed for
TCP FIN or RST packet. The hardware create or remove a fd rule
according to the TX BD, and it also support to age-out a rule
if not hit for a long time.

The queue bonding mode is default to be disabled, and can be
enabled/disabled with ethtool priv-flags command.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I62HX2

----------------------------------------------------------------------

Currently, the PF check the VF alive by the KEEP_ALVE
mailbox from VF. VF keep sending the mailbox per 2
seconds. Once PF lost the mailbox for more than 8
seconds, it will regards the VF is abnormal, and stop
notifying the state change to VF, include link state,
vf mac, reset, even though it receives the KEEP_ALIVE
mailbox again. It's inreasonable.

This patch fixes it. PF will record the state change which
need to notify VF when lost the VF's KEEP_ALIVE mailbox.
And notify VF when receive the mailbox again. Introduce a
new flag HCLGE_VPORT_STATE_INITED, used to distinguish the
case whether VF driver loaded or not. For VF will query
these states when initializing, so it's unnecessary to
notify it in this case.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category:feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I61CGU

----------------------------------------------------------------------

This patch adds support rule type of vxlan4 and vxlan6 for rx flow
director by command ethtool -u/-U.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>

mainline inclusion
from mainline-master
commit cfdcb075
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZXH9
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cfdcb075048c1e886c45a9c9e681ed222f74ecb9

----------------------------------------------------------------------

As the argument struct hnae3_handle *h of function hclge_get_dscp_prio()
can be other client registered in hnae3 layer, we need to transform it
into hnae3_handle of local nic client to get right dscp settings for
other clients.

Fixes: dfea275e ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

Adds ROH reset support for HNS3 ethernet driver.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

Add HCLGE_RAS_REG_ROH_ERR_MASK to support the error
recovery of the ROH ras. Add HCLGE_RAS_REG_ERR_MASK
to define the combination of the nfe_mask, the
rocee_err_mask and the roh_err_mask.

Add new module error types for ROH, adjust the order
of these types according to the design of firmware.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

In ROH mode, MAC address is related to the EID. If an
invalid MAC address is set, the mapping between MAC and
EID cannot be ensured, and communication may be abnormal.
Therefore, firmware verification is required to intercept
invalid MAC address set by user.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

HNAE3 framework add MAC type definitions for NIC or RoCE or ROH clients.

There are two types of MAC in Hip09, ethernet and ROH. In ROH
type, some operations are different, such as setting MAC address.
This type will be used as the judgment condition in subsequent
patches.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

HNAE3 framework supports ROH clients to register with HNAE3
devices and their associated operations.

The ROH driver works as a client at the HNAE layer. The NIC
driver needs to provide some necessary information, such as
the vector base address, and suppor the registration of the
ROH client.

This patch also supports roh device IDs in the hns3 and hclge
modules.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

mainline inclusion
from mainline-v6.0-rc4
commit 236b8f5d
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=236b8f5dc75d

----------------------------------------------------------------------

Currently, driver will always clear user defined field of flow director
in uninit process and sync flow director table in periodic task. However,
if hardware does not support flow director driver should not do those
processes, so add fd ability judgement.

The fd ability judgement in function hclge_clear_fd_rules_in_list() is
redundant, so delete it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc4
commit 09431ed8
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09431ed8de87

----------------------------------------------------------------------

Currently, the function hclge_mbx_handler() has too many switch-case
statements, it makes this function too long. To improve code readability,
refactor this function and use lookup table instead.
Signed-off-by: NHao Lan <lanhao@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc4
commit dfea275e
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dfea275e06c2

----------------------------------------------------------------------

Currently, when function hns3_nic_select_queue() converts dscp to priority,
it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority.

However as function hns3_nic_select_queue() is in fast path, the indirect
call may cause degradation of performance. For optimization, this patch
moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct
hnae3_knic_private_info, so they can be used in both hclge and hns3 layers.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc4
commit 04b6ba14
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=04b6ba143521

----------------------------------------------------------------------

This patch add support for external loopback test.
The successful test need the link is up with duplex full. The
driver do external loopback first, and then the whole offline
test.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc3
commit fddc02eb
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fddc02eb583a

----------------------------------------------------------------------

This patch add dump the map relation for dscp, priority and TC, and
the current tc map mode.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc3
commit f6e32724
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f6e32724ca13

----------------------------------------------------------------------

To support tx packets to select queue according to its dscp field after
setting dscp and tc map relationship, this patch implements
ndo_select_queue() to set skb->priority according to the user's setting
dscp and priority map relationship.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc3
commit 0ba22bcb
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ba22bcb222d

----------------------------------------------------------------------

This patch add support config dscp map to tc by implementing ieee_setapp
and ieee_delapp of struct dcbnl_rtnl_ops. Driver will convert mapping
relationship from dscp-prio to dscp-tc.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 08aa17a0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=08aa17a0c185

----------------------------------------------------------------------

For some new devices, the FEC mode can not be set to OFF in speed 200G.
In order to flexibly adapt to all types of devices, driver queries
fec ability from firmware to decide whether OFF mode can be supported.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 5c4f7284
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5c4f72842d1d

----------------------------------------------------------------------

This patch supports llrs fec mode in speed 200G for some new devices, and
suppoprts querying llrs fec ability from firmware.
Signed-off-by: NHao Lan <lanhao@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit eaf83ae5
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eaf83ae59e18

----------------------------------------------------------------------

For some new devices, driver can queries fec ability from firmware to
decide which FEC mode can be supported.

If devices of old version which not support querying fec ability, driver
sets fixed ability according to current speed.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc2
commit 507e46ae
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5QIIF
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=507e46ae26ea

----------------------------------------------------------------------

As some new devices may not support GRO offload and flow table director,
to support these devices, driver needs to querying capabilities of GRO
offload and flow table director from firmware. Whether the driver
supports these two features depends on capabilities.

For old device of version HNAE3_DEVICE_VERSION_V2, driver sets their
capabilities of these two features to fixed value.

Setting default features of netdev and debugfs also need to identify
whether support these two features.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit 12a36708
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=12a367088772

----------------------------------------------------------------------

Currently in driver initialization process, driver will set shapping
parameters of tm port to default speed read from firmware. However, the
speed of SFP module may not be default speed, so shapping parameters of
tm port may be incorrect.

To fix this problem, driver sets new shapping parameters for tm port
after getting exact speed of SFP module in this case.

Fixes: 88d10bd6 ("net: hns3: add support for multiple media type")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit 71b215f3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=71b215f36dca

----------------------------------------------------------------------

Currently hns3 driver misuses the VF rss size to initialize the PF rss size
in hclge_tm_vport_tc_info_update. So this patch fix it by checking the
vport id before initialization.

Fixes: 7347255e ("net: hns3: refactor PF rss get APIs with new common rss get APIs")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit e93530ae
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e93530ae0e5d

----------------------------------------------------------------------

Currently, settings parameters of schedule mode, dwrr, shaper of tm
priority or qset of one tc are only be set when tc is enabled, they are
not restored to the default settings when tc is disabled. It confuses
users when they cat tm_priority or tm_qset files of debugfs. So this
patch fixes it.

Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit cfd80687
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cfd80687a538

----------------------------------------------------------------------

Currently tx push is also a ring param. So the original ring param print
info in hns3_is_ringparam_changed should be adjusted.

Fixes: 07fdc163 ("net: hns3: refactor hns3_set_ringparam()")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit 283847e3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=283847e3ef6d

----------------------------------------------------------------------

It's unnecessary to push link state to unalive VF, and the VF will
query link state from PF when it being start works.

Fixes: 18b6e31f ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc1
commit 9eda7d8b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DGNU
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9eda7d8bcbdb

----------------------------------------------------------------------

When modify port base vlan, the port base vlan tbl_sta needs to set to
false before removing old vlan, to indicate this operation is not finish.

Fixes: c0f46de3 ("net: hns3: fix port base vlan add fail when concurrent with reset")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 443edfd6
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=443edfd6d43d

----------------------------------------------------------------------

The argument rss_ind_tbl_size is type u16 in function definition of
hclge_comm_get_rss_indir_tbl(), but it is set to type __le16 in function
declaration by mistake, so fix it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit a1aed456
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a1aed456e326

----------------------------------------------------------------------

This patch adds a new mailbox opcode to query map relation between
vf ring and vector.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 416eedb6
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=416eedb60361

----------------------------------------------------------------------

This patch uses __le16/__32 to define mailbox data structures. Then byte
order conversion are added for mailbox messages from VF to PF.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit 767975e5
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=767975e582c5

----------------------------------------------------------------------

Currently, hns3 mailbox processing between PF and VF missed to convert
message byte order and use data type u16 instead of __le16 for mailbox
data process. These processes may cause problems between different
architectures.

So this patch uses __le16/__le32 data type to define mailbox data
structures. To be compatible with old hns3 driver, these structures use
one-byte alignment. Then byte order conversions are added to mailbox
messages from PF to VF.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit bbed7024
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bbed70241204

----------------------------------------------------------------------

Vector0 is used for common interrupt control events and is
irrelevant to performance. Currently, the driver sets the
default affinity of vector0 to NUMA nodes, which is unnecessary.
Therefore, the default setting is removed, and the driver does
not set the affinity for vector0.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-origin
commit a4fe9b6d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a4fe9b6db6f9

----------------------------------------------------------------------

When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer()
will return directly and priv->ring->tx_spare->len is uninitialized,
then print function access priv->ring->tx_spare->len will cause
this issue.

When set tx-buf-size as 0 by ethtool, the print function will
print 0 directly and not access priv->ring->tx_spare->len.

Fixes: 2373b35c ("net: hns3: add log for setting tx spare buf size")
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc5
commit c59d6062
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c59d60629684

----------------------------------------------------------------------

Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.

Fixes it by adding return value for these function.

Fixes: 63b1279d ("net: hns3: check queue id range before using")
Fixes: 532cfc0d ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc5
commit 7d413735
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7d413735cb18

----------------------------------------------------------------------

Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.

Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc5
commit 48009e99
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=48009e997297

----------------------------------------------------------------------

Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.

So this patch fixes it by return -EINVAL in this abnormal branch.

Fixes: 5d02a58d ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc5
commit 123521b6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=123521b6b260

----------------------------------------------------------------------

The comments in function hclge_comm_tqps_update_stats is not right,
so fix it.

Fixes: 287db5c4 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>