Don't read DSN on VFs that do not have the PCI capability.

Fixes: 03213a99 ("bnxt: move bp->switch_id initialization to PF probe")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Skip RDMA context memory allocations, reduce to 1 ring, and disable
TPA when running in the kdump kernel.  Without this patch, the driver
fails to initialize with memory allocation errors when running in a
typical kdump kernel.

Fixes: cf6daed0 ("bnxt_en: Increase context memory allocations on 57500 chips for RDMA.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When making configuration changes, the driver calls bnxt_close_nic()
and then bnxt_open_nic() for the changes to take effect.  A parameter
irq_re_init is passed to the call sequence to indicate if IRQ
should be re-initialized.  This irq_re_init parameter needs to
be included in the bnxt_reserve_rings() call.  bnxt_reserve_rings()
can only call pci_disable_msix() if the irq_re_init parameter is
true, otherwise it may hit BUG() because some IRQs may not have been
freed yet.

Fixes: 41e8d798 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For every RX packet, the driver replenishes all buffers used for that
packet and puts them back into the RX ring and RX aggregation ring.
In one code path where the RX packet has one RX buffer and one or more
aggregation buffers, we missed recycling the aggregation buffer(s) if
we are unable to allocate a new SKB buffer.  This leads to the
aggregation ring slowly running out of buffers over time.  Fix it
by properly recycling the aggregation buffers.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: NRakesh Hemnani <rhemnani@fb.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 984203ce ("net: stmmac: mdio: remove reset gpio free")
removed the reset gpio free, when the driver is unbinded or rmmod,
we miss the gpio free.

This patch uses managed API to request the reset gpio, so that the
gpio could be freed properly.

Fixes: 984203ce ("net: stmmac: mdio: remove reset gpio free")
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SAMA5D2 SoC has a suspend mode where SoC's power is cut off. Due to this
the registers content is lost after a suspend/resume cycle. The current
suspend/resume implementation covers some of these registers. However
there are few which were not treated (e.g. SCRT2 and USRIO). Apart
from this, netdev features are not restored. Treat these issues.
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Doing kmalloc in atomic context is always an issue,
more so for a list that can grow significantly.
Turns out that the driver only uses the duplicated
list of multicast mac addresses to keep track of
what addresses to delete from h/w before committing
the new list from kernel to h/w back again via set_rx_mode,
every time this list gets updated by the kernel.
Given that the h/w knows how to add and delete mac addresses
based on the mac address value alone, __dev_mc_sync should be
the much better choice of kernel API for these operations
avoiding the considerable overhead of maintaining a duplicated
list in the driver.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Tested-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on 1 normalized pattern(s):

  this software may be redistributed and or modified under the terms
  of the gnu general public license as published by the free software
  foundation either version 2 of the license or any later version this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NJilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.800979546@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses the full gnu
  general public license is included in this distribution in the file
  called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NJilayne Lovejoy <opensource@jilayne.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.045106120@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NJilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin street fifth floor boston ma 02110 1301 usa

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option [no]_[pad]_[ctrl] any later version this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin street fifth floor boston ma
  02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NJilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and
stmmac_init_tx_chan(). This is because if PBLx8 is to be used,
"DMA_CH(#i)_Control.PBLx8" needs to be set before programming
"DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL".

Fixes: 47f2a9ce ("net: stmmac: dma channel init prepared for multiple queues")
Reviewed-by: NZhang, Baoli <baoli.zhang@intel.com>
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NWeifeng Voon <weifeng.voon@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.

This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.

Fixes: 3c1bcc86 (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
Signed-off-by: NTan, Tee Min <tee.min.tan@intel.com>
Reviewed-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

xemaclite_mdio_wait():
  xemaclite_readl() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which takes care
of the situation.
Signed-off-by: NKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

axienet_mdio_wait_until_ready():
  axienet_ior() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which take care
of the situation.
Signed-off-by: NKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent reading unsupported slave address from SFP EEPROM by testing
Diagnostic Monitoring Type byte in EEPROM. Read only page zero of
EEPROM, in case this byte is zero.

If some SFP transceiver does not support Digital Optical Monitoring
(DOM), reading SFP EEPROM slave address 0x51 could return an error.
Availability of DOM support is verified by reading from zero page
Diagnostic Monitoring Type byte describing how diagnostic monitoring is
implemented by transceiver. If bit 6 of this byte is set, it indicates
that digital diagnostic monitoring has been implemented. Otherwise it is
not and transceiver could fail to reply to transaction for slave address
0x51 [1010001X (A2h)], which is used to access measurements page.

Such issue has been observed when reading cable MCP2M00-xxxx,
MCP7F00-xxxx, and few others.

Fixes: 2ea10903 ("mlxsw: spectrum: Add support for access cable info via ethtool")
Fixes: 4400081b ("mlxsw: spectrum: Fix EEPROM access in case of SFP/SFP+")
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Old Mellanox silicons, like switchx-2, switch-ib do not support reading
QSFP modules temperature through MTMP register. Attempt to access this
register on systems equipped with the this kind of silicon will cause
initialization flow failure.
Test for hardware resource capability is added in order to distinct
between old and new silicon - old silicons do not have such capability.

Fixes: 6a79507c ("mlxsw: core: Extend thermal module with per QSFP module thermal zones")
Fixes: 5c42eaa0 ("mlxsw: core: Extend hwmon interface with QSFP module temperature attributes")
Reported-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The cited commit could disable the modify header flag, but did not free
the allocated memory for the modify header actions. Fix it.

Fixes: 27c11b6b ("net/mlx5e: Do not rewrite fields with the same match")
Signed-off-by: NEli Britstein <elibr@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

With commit 27c11b6b ("net/mlx5e: Do not rewrite fields with the
same match") there are no rewrites if the rewrite value is the same as
the matched value. However, if the field is not matched, the rewrite is
also wrongly skipped. Fix it.

Fixes: 27c11b6b ("net/mlx5e: Do not rewrite fields with the same match")
Signed-off-by: NEli Britstein <elibr@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Flow destination comparison has an inaccuracy: code see no
difference between same vf ports, which belong to different pfs.

Example: If start ping from VF0 (PF1) to VF1 (PF1) and mirror
all traffic to VF0 (PF2), icmp reply to VF0 (PF1) and mirrored
flow to VF0 (PF2) would be determined as same destination. It lead
to creating flow handler with rule nodes, which not added to node
tree. When later driver try to delete this flow rules we got
kernel crash.

Add comparison of vhca_id field to avoid this.

Fixes: 1228e912 ("net/mlx5: Consider encapsulation properties when comparing destinations")
Signed-off-by: NDmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

For all representors added firmware version info to show in
ethtool driver info.
For uplink representor, because only it is tied to the pci device
sysfs, added pci bus info.

Fixes: ff9b85de ("net/mlx5e: Add some ethtool port control entries to the uplink rep netdev")
Signed-off-by: NDmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: NGavi Teitz <gavi@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

With the cited commit, ACLs are configured for the VF ports. The loop
for the number of ports had the wrong number. Fix it.

Fixes: 18486737 ("net/mlx5e: ACLs for priority tag mode")
Signed-off-by: NEli Britstein <elibr@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

ethtool user spaces needs to know ring count via ETHTOOL_GRXRINGS when
executing (ethtool -x) which is retrieved via ethtool get_rxnfc callback,
in mlx5 this callback is disabled when CONFIG_MLX5_EN_RXNFC=n.

This patch allows only ETHTOOL_GRXRINGS command on mlx5e_get_rxnfc() when
CONFIG_MLX5_EN_RXNFC is disabled, so ethtool -x will continue working.

Fixes: fe6d86b3 ("net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfc")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Cited patch refactored the xmit_more indication while not preserving
its functionality. Fix it.

Fixes: 3c31ff22 ("drivers: mellanox: use netdev_xmit_more() helper")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The command was mistakenly using enable_hca in embedded CPU field.

Fixes: 22e939a9 (net/mlx5: Update enable HCA dependency)
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reported-by: NAlex Rosenbaum <alexr@mellanox.com>
Signed-off-by: NAlex Rosenbaum <alexr@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To avoid any ambiguity between vport index and vport number,
rename functions that had vport, to vport_num or vport_index appropriately.

vport_num is u16 hence change mlx5_eswitch_index_to_vport_num() return
type to u16.

vport_index is an int in vport array. Hence change input type of vport
index in mlx5_eswitch_index_to_vport_num() to int.

Correct multiple eswitch representor interfaces use type u16 of
rep->vport as type int vport_index.

Send vport FW commands with correct eswitch u16 vport_num instead
host int vport_index.

Fixes: 5ae51620 ("net/mlx5: E-Switch, Assign a different position for uplink rep and vport")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NVu Pham <vuhuong@mellanox.com>
Reviewed-by: NBodong Wang <bodong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Current version of function status_to_err return -1 for any
status returned by mlx5_cmd_invoke function. In case status is
MLX5_DRIVER_STATUS_ABORTED we should return 0 to the caller as we
assume command completed successfully on FW. If error returned we are
getting confusing messages in dmesg. In addition, currently returned
value -1 is confusing with -EPERM.

New implementation actually fix original commit and return meaningful
codes for commands delivery status and print message in case of failure.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: NValentine Fatiev <valentinef@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

mlxfw can be compiled as external module while mlx5_core can be
builtin, in such case mlx5 will act like mlxfw is disabled.

Since mlxfw is just a service library for mlx* drivers,
imply it in mlx5_core to make it always reachable if it was enabled.

Fixes: 3ffaabec ("net/mlx5e: Support the flash device ethtool callback")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When flow_rule_match_XYZ() functions were first introduced,
flow_rule_match_cvlan() for inner vlan is missing.

In mlx5_core driver, to get inner vlan key and mask, flow_rule_match_vlan()
is just called, which is wrong because it obtains outer vlan information by
FLOW_DISSECTOR_KEY_VLAN.

This commit fixes this by changing to call flow_rule_match_cvlan() after
it's added.

Fixes: 8f256622 ("flow_offload: add flow_rule and flow_match structures and use them")
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just hook get_link to standard ethtool_op_get_link,
nothing special needed at this point.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fact that the Tx SG flag is fixed to 'on' is only
an oversight. Non-SG mode is also supported. Fix this
by allowing to turn SG off.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the unlikely case of TxBD extensions (i.e. ptp)
the driver tries to unmap the tx_swbd corresponding
to the extension, which is bogus as it has no buffer
attached.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add rcu locks when accessing netdev when processing route request
and tunnel keep alive messages received from hardware.

Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload")
Fixes: 856f5b13 ("nfp: flower vxlan neighbour keep-alive")
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Errors are negative numbers. Using %u shows them as very large positive
numbers such as 4294967277 that don't make sense. Use the %d format
instead, and get a much nicer -19.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Fixes: b48e0bab ("net: macb: Migrate to devm clock interface")
Fixes: 93b31f48 ("net/macb: unify clock management")
Fixes: 421d9df0 ("net/macb: merge at91_ether driver into macb driver")
Fixes: aead88bd ("net: ethernet: macb: Add support for rx_clk")
Fixes: f5473d1d ("net: macb: Support clock management for tsu_clk")
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error print within mlx4_flow_steer_promisc_add() should
be a info print.

Fixes: 592e49dd ('net/mlx4: Implement promiscuous mode with device managed flow-steering')
Signed-off-by: NYunjian Wang <wangyunjian@huawei.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mark completion EQs as shared resources so that they can be used by CQs
with uid != 0.

Fixes: 7efce369 ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>