Add support for Innolux TV123WAM, which is a 12.3" eDP display panel
with 2160x1440 resolution.

Changes in v1:
 - Add the compatibility string, display_mode and panel_desc
   structures in alphabetical order (Sean Paul).
Signed-off-by: NSandeep Panda <spanda@codeaurora.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526363564-13823-4-git-send-email-spanda@codeaurora.org

Remove all drm_panel_detach() calls from all panel drivers and update
the kerneldoc for drm_panel_detach().

Setting the connector and drm to NULL when the DRM panel device is going
away hardly serves any purpose. Usually the whole memory structure is
freed right after the remove call. However, calling the detach function
from the master DRM device, and setting the connector pointer to NULL,
has the logic of marking the panel again as available for another DRM
master to attach. The usual situation would be the same DRM master
device binding again.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com

This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM
simple panel driver.
Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: NStefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513430016.1930.4.camel@googlemail.com

This adds support for the Kaohsiung Opto-Electronics.,
TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be
supported by the simple panel driver.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1517766571-409-5-git-send-email-jagan@amarulasolutions.com

Convert the sharp lq123p1jx31 from using a fixed mode to specifying a
display timing with min/typ/max values. This allows us to capture the
timings set forth in the datasheet as well as the additional values that
we've cleared with the display vendor to avoid interference with the
digitizer on the Samsung Chromebook Plus (kevin).

A follow-on patch will specify the override mode for kevin devices.

Changes in v2:
 - None
Changes in v3:
 - None

Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Tested-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208174855.55620-6-seanpaul@chromium.org

This fixes bad color output.  When I was first testing the device I
had the DPI hardware set to 666 mode, but apparently in the refactor
to use the bus_format information from the panel driver, I failed to
actually update the panel.
Signed-off-by: NEric Anholt <eric@anholt.net>
Fixes: e8b6f561 ("drm/panel: simple: Add the 7" DPI panel from Adafruit")
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net

The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in
8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de

The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected
via LVDS and can be supported by the simple-panel binding.
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de

Only exposes a single mode and not a complete display timing, as
the datasheet is rather vague about the minimum/maximum values.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018172240.8772-1-l.stach@pengutronix.de

The delays between video data and backlight enable and between backlight
disable and end of video data are given as >= 160 ms in the datasheet.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NMarco Franchi <marco.franchi@nxp.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-3-p.zabel@pengutronix.de

For LCD interface controllers that support configuring polarity of
pixel clock and data enable signal, specify bus flags in the panel
descriptor.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NMarco Franchi <marco.franchi@nxp.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-2-p.zabel@pengutronix.de

The vsync length should be 10 lines, as specified in the data sheet.
This gets the actual refresh rate closer to nominal 60 Hz given the
9 MHz pixel clock.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NMarco Franchi <marco.franchi@nxp.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-1-p.zabel@pengutronix.de

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500249939-8075-1-git-send-email-festevam@gmail.com

During panel removal or system shutdown panel_simple_disable() is called
which disables the panel backlight but the panel is still powered due to
missing calls to panel_simple_unprepare().

Fixes: d02fd93e ("drm/panel: simple - Disable panel on shutdown")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: NJonathan Liu <net147@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.com

The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm
but the active display area is 95.04 (W) x 53.856 (H) mm.

The width and height should be set to the active display area.
Signed-off-by: NJonathan Liu <net147@gmail.com>
Fixes: cf5c9e6d ("drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS")
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720102943.25091-1-net147@gmail.com

When enable_gpio is provided via an I2C or SPI expander, it may not be
available when panel-simple probes leading to the following error:

panel-simple panel: failed to request GPIO: -517

As this error message is not very useful to the end user, skip printing
it in the case of deferred probe.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1498857286-10820-1-git-send-email-festevam@gmail.com

This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de

This adds support for the NLT Technologies NL192108AC18-02D
15.6" LVDS FullHD TFT LCD panel, which can be supported
by the simple panel driver.

Timings are taken from the preliminary datasheet, as a final
one is not yet available.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-3-l.stach@pengutronix.de

This adds support for the NEC LCD Technologies, Ltd. 12.1"
WXGA (1280x800) LVDS TFT LCD panel, which can be supported
by the simple panel driver.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-1-l.stach@pengutronix.de

This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT
LCD panel, which can be supported by the simple panel driver.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add simple-panel support for the Ampire AM-480272H3TMQW-T01H, which is a
4.3" WQVGA panel.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The display has a 18-Bit parallel LCD interface, require DE to be
active high and data driven by the controller on falling pixel
clock edge (display samples on rising edge).
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The E231732 is a 7" panel with a resolution of 1024x600.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
[treding@nvidia.com: add missing device tree binding]
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Tianma TM070JDHG30 is a 7" LVDS display with a resolution of
1280x800.

	http://usa.tianma.com/products-technology/product/tm070jdhg30-00

You can also find this product along with a FT5x06 touch controller
from Boundary Devices:

	https://boundarydevices.com/product/bd070lic2/Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The BOE NV101WXMN51 is a 10.1" WXGA color active matrix TFT LCD module
using amorphous silicon TFT's as an active switching devices. It can be
supported by the simple-panel driver.

Read the panel default EDID information:

	EDID MODE DETAILS
		name = <NULL>
		pixel_clock = 71900
		lvds_dual_channel = 0
		refresh = 0
		ha = 1280
		hbl = 160
		hso = 48
		hspw = 32
		hborder = 0
		va = 800
		vbl = 32
		vso = 3
		vspw = 5
		vborder = 0
		phsync = +
		pvsync = -
		x_mm = 0
		y_mm = 0

	drm_display_mode
		.hdisplay = 1280
		.hsync_start = 1328
		.hsync_end = 1360
		.htotal = 1440
		.vdisplay = 800
		.vsync_start = 803
		.vsync_end = 808
		.vtotal = 832

There are two modes in the EDID:

	Detailed mode1: Clock 71.900 MHz, 216 mm x 135 mm
			1280 1328 1360 1440 hborder 0
			 800  803  808  832 vborder 0
			+hsync -vsync

	Detailed mode2: Clock 57.500 MHz, 216 mm x 135 mm
			1280 1328 1360 1440 hborder 0
			 800  803  808  832 vborder 0
			+hsync -vsync

Support both of these modes on the panel.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Convert from a single mode to display timings, which allow to describe
the minimum/maximium blanking and clock rates, add enable/disable delays
and provide the bus format.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Sharp LQ123P1JX31 panel support 8 bits per component.
Signed-off-by: Nzain wang <wzz@rock-chips.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

In the loop on .timings, we should check .num_timings to see if it's the
only mode specified, not .num_modes, which should be used with .modes.

Fixes: cda55372 ("drm/panel: simple: Set appropriate mode type")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
supported by the simple panel driver.
Signed-off-by: NRandy Li <ayaka@soulik.info>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
Signed-off-by: NFabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The AUO T215HVN01 is a 21.5" FHD (1920x1080) color TFT LCD panel.

This panel is used on the Acer Chromebase 21.5-inch All-in-One (DC221HQ).

Link to spec: http://www.udmgroup.com/ftp/T215HVN01.0.pdf

v2: fix alphabetical order
v3: remove minor revision suffix ".0" and add link to spec
v4: add dt-binding documentation
Signed-off-by: NHaixia Shi <hshi@chromium.org>
Tested-by: NHaixia Shi <hshi@chromium.org>
Reviewed-by: NStéphane Marchesin <marcheu@chromium.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel.

The simple-panel driver is used to get support for essential
functionality of the panel.
Signed-off-by: NGustaf Lindström <gl@axentia.se>
Signed-off-by: NPeter Rosin <peda@axentia.se>
[treding@nvidia.com: change .bpc from 8 to 6]
Signed-off-by: NThierry Reding <treding@nvidia.com>

The format is RGB888 not RGB666.
Signed-off-by: NJonathan Liu <net147@gmail.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Taking our cue from commit a42f6e3f ("drm/panel: simple: Add delay
timing for Sharp LQ123P1JX31"), let's add timings:

 .prepare = t1 + t3
 .enable = t7
 .unprepare = t11 + 12

Without this, the panel may not be given enough time to come up.
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

This display expects DE pin and data lines to be active high, add the
necessary flags.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

This patch adds support for Innolux Corporation 10.1" G101ICE-L01 WXGA
(1280x800) LVDS panel to the simple-panel driver.
Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

According to page 16 of the Sharp LQ123P1JX31 datasheet, we need to add
the missing delay timing. Panel prepare time should be t1 (0.5 to 10 ms)
plus t3 (0 to 100 ms), panel enable time should equal to t7 (0 to 50 ms)
and panel unprepare time should be t11 (1 to 50 ms) plus t12 (500 ms).
Signed-off-by: NYakir Yang <ykk@rock-chips.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Starry KR122EA0SRA is a 12.2", 1920x1200 TFT-LCD panel connected
using eDP interfaces.

EDID shows:
  Detailed mode: Clock 147.000 MHz, 263 mm x 164 mm
                 1920 1936 1952 1984 hborder 0
                 1200 1215 1217 1235 vborder 0
                 -hsync -vsync
  Manufacturer-specified data, tag 15
  ASCII string: STARRY
  ASCII string: KR122EA0SRA
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>