Add a V4L2 sub-device driver for Hynix Hi-847 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- vflip/hflip control support
  - keep SGRBG10 Bayer order output
- support following resolutions:
  + 3264x2448 at 30FPS
  + 1632x1224 at 60FPS

[Sakari Ailus: Wrapped a few long lines.]
Signed-off-by: NShawn Tu <shawnx.tu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The
chip is capable of a single lane configuration, but currently only two
lanes are supported.

Most of the sensor's features are supported, with the main exception
being the lens correction algorithm.

The driver provides all mandatory, optional and recommended V4L2 controls
for maximum compatibility with libcamera.

[mchehab: fixed a coding style warning]
Signed-off-by: NDaniel Scally <djrscally@gmail.com>
Tested-by: NJean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: NJean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.

This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.

The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go

The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.
Signed-off-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS
Signed-off-by: NArec Kao <arec.kao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a v4l2 sub-device driver for the OmniVisison ov9282
black&white image sensor.
The camera sensor uses the i2c bus for control and the
csi-2 bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
    - 1280x720 @ 30fps

[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: NMartina Krasteva <martinax.krasteva@intel.com>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: NPaul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a v4l2 sub-device driver for the Sony imx412 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
    - 4056x3040 @ 30fps
- supported bayer order output:
    - SRGGB10

[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: NMartina Krasteva <martinax.krasteva@intel.com>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: NPaul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a v4l2 sub-device driver for the Sony imx335 image sensor.
ThE camera sensor uses the i2c bus for control and the csi-2
bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
	- 2592x1940 @ 30fps
- supported bayer order output:
	- SRGGB12

[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: NMartina Krasteva <martinax.krasteva@intel.com>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: NPaul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a V4L2 sub-device driver for the Sony IMX208 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

[Sakari Ailus: Rename sensor async register function to make it compile,
	       use exposure_max and wrap a few long lines.]
Signed-off-by: NPing-Chung Chen <ping-chung.chen@intel.com>
Signed-off-by: NYeh, Andy <andy.yeh@intel.com>
Signed-off-by: NShawn Tu <shawnx.tu@intel.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

With the introduction of the RDACM21 camera module support in commit
a59f853b ("media: i2c: Add driver for RDACM21 camera module") the
symbols defined by the max9271 library were exported twice if multiple
users of the library were compiled in at the same time.

In example:
WARNING: modpost: drivers/media/i2c/rdacm21-camera_module:
'max9271_set_serial_link' exported twice. Previous export was in
drivers/media/i2c/rdacm20-camera_module.ko

Fix this by making the max9271 file a module and have the driver
using its functions select it.

Fixes: a59f853b ("media: i2c: Add driver for RDACM21 camera module")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NMauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a v4l2 sub-device driver for the Sony imx334 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
    - 3840x2160 @ 60fps
- supported bayer order output:
    - SRGGB12
Signed-off-by: NMartina Krasteva <martinax.krasteva@intel.com>
Reviewed-by: NGjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: NPaul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The RDACM21 is a GMSL camera supporting 1280x1080 resolution images
developed by IMI based on an Omnivision OV10640 sensor, an Omnivision
OV490 ISP and a Maxim MAX9271 GMSL serializer.

The driver uses the max9271 library module, to maximize code reuse with
other camera module drivers using the same serializer, such as rdacm20.
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The OV8865 is a 8 Mpx CMOS image sensor producing 3264x2448 at 30 fps.
Other modes (including some with sub-sampling) are available too.
It outputs 10-bit bayer CFA data through a MIPI CSI-2 interface with
up to 4 lanes supported.

Some register initialisation sequences are still needed for this driver,
as they cover registers for which no documentation is available.

This work is based on the first version of the driver submitted by
Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP.
This version is a rewrite of the first version that matches the structure
of the OV5648 driver, with explicit PLL configuration, all the necessary
mode-specific fields, associatied registers and reduced static sequences.

It was tested with the Banana Pi Camera Board v3 and the Banana Pi M3.
Co-developed-by: NKévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: NKévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The OV5648 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2
in a one or two lane configuration.

Most of the features of the hardware are supported, including:
- Auto and manual exposition/gain
- Auto and manual white balance
- Horizontal and vertical flip
- Test patterns

But the following are still missing:
- Debanding, based on power source frequency;
- Exposition setting correlated to time units.
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new
features while existing functionality will be supported. Rename the
smiapp-pll as ccs-pll accordingly.

Also add Intel copyright to the files.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a V4L2 sub-device driver for OmniVision OV02A10 image sensor.
Signed-off-by: NDongchun Zhu <dongchun.zhu@mediatek.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename the "smiapp" driver as "ccs". MIPI CCS is the contemporary standard
for raw Bayer camera sensors. The driver retains support for the SMIA++
and SMIA compliant camera sensors. A module alias is added for old user
space using "smiapp" module name.

Add Intel copyright while at it.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a v4l2 sub-device driver for the OminiVision ov9734 image sensor
which can deliver maximum 720p image frames at 30 fps. This driver
also add vertical blanking, exposure, test pattern, digital and analog
gain control for the image sensor.
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NTianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The RDACM20 is a GMSL camera supporting 1280x800 resolution images
developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271
GMSL serializer.

The GMSL link carries power, control (I2C) and video data over a
single coax cable.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and
CSI-2 output. The device supports multicamera streaming applications,
and features the ability to synchronise the attached cameras.

CSI-2 output can be configured with 1 to 4 lanes, and a control channel
is supported over I2C, which implements an I2C mux to facilitate
communications with connected cameras across the reverse control
channel.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a V4L2 sub-device driver for DW9768 voice coil motor,
providing control to set the desired focus via IIC serial interface.
Signed-off-by: NDongchun Zhu <dongchun.zhu@mediatek.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

OminiVision ov2740 is a 2 megapixels RAW RGB image sensor which can
deliver 1920x1080@60fps frames. This driver add the support of
vertical blanking, exposure, test pattern, digital and analog gain
control for sensor.
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NShawn Tu <shawnx.tu@intel.com>
Signed-off-by: NQiu, Tianshu <tian.shu.qiu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Adds a driver for the 8MPix Sony IMX219 CSI2 sensor.
Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver
currently only supports 2 lanes.
8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned)
@ 30fps are currently supported.

[Sakari Ailus: make imx219_check_hwcfg static]
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NAndrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a V4L2 sub-device driver for Hynix Hi-556 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 2592x1944 at 30FPS
  + 1296x972  at 30FPS

[sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies]
Signed-off-by: NShawn Tu <shawnx.tu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Add driver for Sony IMX290 CMOS image sensor driver. The driver only
supports I2C interface for programming and MIPI CSI-2 for sensor output.

[Sakari Ailus: Rewrapped a few lines over 80 chars a little.]
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a V4L2 sub-device driver for Omnivision ov5675 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 2592x1944 at 30FPS
  + 1296x972  at 30FPS

[Sakari Ailus: Wrapped a few long lines.]
[mchehab+samsung@kernel.org: fix a checkpatch warning]
Signed-off-by: NShawn Tu <shawnx.tu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511
enabled as loadable modules, we see the following warning:

  drivers/gpu/drm/bridge/adv7511/adv7511.ko
  drivers/media/i2c/adv7511.ko

Rework so that the file is named adv7511-v4l2.c.
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This V4L2 subdev driver enables STMicroelectronics MIPID02 device.
Signed-off-by: NMickael Guene <mickael.guene@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The SoC camera framework has no functional drivers left, something that
has not changed for years. Move the leftovers to the staging tree.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch adds driver for Omnivision's ov8856 sensor,
the driver supports following features:

- manual exposure/gain(analog and digital) control support
- two link frequencies
- VBLANK/HBLANK support
- test pattern support
- media controller support
- runtime PM support
- enable Vsync signal output
- supported resolutions
  + 3280x2464 at 30FPS
  + 1640x1232 at 30FPS
Signed-off-by: NBen Kao <ben.kao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Initial part of ov9640 transition from soc_camera subsystem to a standalone
v4l2 subdevice. The soc_camera version seems to be used only in Palm Zire72
and in (the future) HTC Magician. On these two devices the support is
broken as pxa_camera driver doesn't use soc_camera anymore. The other
mentions from git grep are "TODOs" (in board-osk.c) or chip names for
unsupported sensors on HW which doesn't use soc_camera at all (irelevant).

Copy the driver files from soc_camera and mark the original ones in the
Kconfig description as obsoleted.

Add config option VIDEO_OV9640 to the build files in drivers/media/i2c.
Signed-off-by: NPetr Cvek <petrcvekcz@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.

[Sakari Ailus: squash exposure time max limit patch]
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a v4l2 sub-device driver for the Sony imx355 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

This driver supports following features:

- manual exposure and analog/digital gain control support
- vblank/hblank control support
- 4 test patterns control support
- vflip/hflip control support (will impact the output bayer order)
- support following resolutions:
    - 3268x2448, 3264x2448, 3280x2464 @ 30fps
    - 1940x1096, 1936x1096, 1924x1080, 1920x1080 @ 60fps
    - 1640x1232, 1640x922, 1300x736, 1296x736,
      1284x720, 1280x720 820x616 @ 120fps
- support 4 bayer orders output (via change v/hflip)
    - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10

[Sakari Ailus: Use do_div() for dividing 64-bit numbers, fix fwnode if usage]

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: NTianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a v4l2 sub-device driver for the Sony imx319 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
-  4 test patterns control support
- vflip/hflip control support (will impact the output bayer order)
- support following resolutions:
    - 3264x2448, 3280x2464 @ 30fps
    - 1936x1096, 1920x1080 @ 60fps
    - 1640x1232, 1640x922, 1296x736, 1280x720 @ 120fps
- support 4 bayer orders output (via change v/hflip)
    - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10

[Sakari Ailus: Replace 64-bit division by do_div(), fix fwnode if usage]

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NTianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch adds V4L2 sub-device driver for OV2680 image sensor.
The OV2680 is a 1/5" CMOS color sensor from Omnivision.
Supports output format: 10-bit Raw RGB.
The OV2680 has a single lane MIPI interface.

The driver exposes following V4L2 controls:
- auto/manual exposure,
- exposure,
- auto/manual gain,
- gain,
- horizontal/vertical flip,
- test pattern menu.
Supported resolution are only: QUXGA, 720P, UXGA.

[Sakari Ailus: Drop "-level" from Kconfig help text]
Signed-off-by: NRui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor.

The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an
integrated Image Flow Processor.
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The dw9807 contains a voice coil lens driver as well as an EEPROM. This
driver is just for the VCM. Reflect this in the driver's name --- this is
already the case for the compatible string, for instance.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a v4l2 sub-device driver for the ak7375 lens voice coil.
This is a voice coil module using the i2c bus to control the
focus position.

ak7375 can write multiple bytes of data at a time. If more
data is received instead of the stop condition after receiving
one byte of data, the address inside the chip is automatically
incremented and the data is written into the next address.

The ak7375 can control the position with 12 bits value and
consists of two 8 bit registers show as below:
register 0x00(AK7375_REG_POSITION):
    +---+---+---+---+---+---+---+---+
    |D11|D10|D09|D08|D07|D06|D05|D04|
    +---+---+---+---+---+---+---+---+
register 0x01:
    +---+---+---+---+---+---+---+---+
    |D03|D02|D01|D00|---|---|---|---|
    +---+---+---+---+---+---+---+---+

This driver support :
    - set ak7375 to standby mode once suspend and
      turn it back to active if resume
    - set the position via V4L2_CID_FOCUS_ABSOLUTE ctrl

[Sakari Ailus: Rename val as ret in probe, drop redundant error message]
Signed-off-by: NTianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

DW9807 is a 10 bit DAC from Dongwoon, designed for linear
control of voice coil motor.

This driver creates a V4L2 subdevice and
provides control to set the desired focus.
Signed-off-by: NAlan Chiang <alanx.chiang@intel.com>
Signed-off-by: NAndy Yeh <andy.yeh@intel.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Remove soc_camera framework dependencies from rj54n1 sensor driver.
- Handle clock
- Handle GPIOs (named 'powerup' and 'enable')
- Register the async subdevice
- Remove g/s_mbus_config as they're deprecated.
- Adjust build system
- List the driver as maintained for 'Odd Fixes' as I don't have HW to test.

This commits does not remove the original soc_camera based driver.

Compiled tested only.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>