media: i2c: Add imx334 camera sensor driver

Add a v4l2 sub-device driver for the Sony imx334 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
    - 3840x2160 @ 60fps
- supported bayer order output:
    - SRGGB12
Signed-off-by: NMartina Krasteva <martinax.krasteva@intel.com>
Reviewed-by: NGjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com>
Acked-by: NDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: NPaul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

MAINTAINERS

@@ -16592,6 +16592,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
+F:	drivers/media/i2c/imx334.c
 
 SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>

drivers/media/i2c/Kconfig

@@ -813,6 +813,20 @@ config VIDEO_IMX319
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx319.
 
+config VIDEO_IMX334
+	tristate "Sony IMX334 sensor support"
+	depends on OF_GPIO
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX334 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx334.
+
 config VIDEO_IMX355
 	tristate "Sony IMX355 sensor support"
 	depends on I2C && VIDEO_V4L2

drivers/media/i2c/Makefile

@@ -122,6 +122,7 @@ obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
+obj-$(CONFIG_VIDEO_IMX334)	+= imx334.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
 obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
 rdacm20-camera_module-objs	:= rdacm20.o max9271.o