Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 7
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 19 4月, 2008 1 次提交
  3. 18 4月, 2008 4 次提交
    • S
      firewire: fw-ohci: add option for remote debugging · 080de8c2
      由 Stefan Richter 提交于 
      This way firewire-ohci can be used for remote debugging like ohci1394.
Version with amendment from Fri, 11 Apr 2008 00:08:08 +0200.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NBernhard Kaindl <bk@suse.de>
      080de8c2
    • J
      kgdb: allow static kgdbts boot configuration · 974460c5
      由 Jason Wessel 提交于 
      This patch adds in the ability to compile the kgdb internal test
string into the kernel so as to run the tests at boot without changing
the kernel boot arguments.  This patch also changes all the error
paths to invoke WARN_ON(1) which will emit the line number of the file
and dump the kernel stack when an error occurs.

You can disable the tests in a kernel that is built this way
using "kgdbts="
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      974460c5
    • J
      kgdb: add kgdb internal test suite · e8d31c20
      由 Jason Wessel 提交于 
      This patch adds regression tests for testing the kgdb core and arch
specific implementation.

The kgdb test suite is designed to be built into the kernel and not as
a module because it uses a number of low level kernel and kgdb
primitives which should not be exported externally.

The kgdb test suite is designed as a KGDB I/O module which
simulates the communications that a debugger would have with kgdb.
The tests are broken up in to a line by line and referenced here as
a "get" which is kgdb requesting input and "put" which is kgdb
sending a response.

The kgdb suite can be invoked from the kernel command line
arguments system or executed dynamically at run time.  The test
suite uses the variable "kgdbts" to obtain the information about
which tests to run and to configure the verbosity level.  The
following are the various characters you can use with the kgdbts=
line:

When using the "kgdbts=" you only choose one of the following core
test types:
A = Run all the core tests silently
V1 = Run all the core tests with minimal output
V2 = Run all the core tests in debug mode

You can also specify optional tests:
N## = Go to sleep with interrupts of for ## seconds
      to test the HW NMI watchdog
F## = Break at do_fork for ## iterations
S## = Break at sys_open for ## iterations

NOTE: that the do_fork and sys_open tests are mutually exclusive.

To invoke the kgdb test suite from boot you use a kernel start
argument as follows:
	kgdbts=V1 kgdbwait
Or if you wanted to perform the NMI test for 6 seconds and do_fork
test for 100 forks, you could use:
	kgdbts=V1N6F100 kgdbwait

The test suite can also be invoked at run time with:
echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts
Or as another example:
echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts

When developing a new kgdb arch specific implementation or
using these tests for the purpose of regression testing,
several invocations are required.

1) Boot with the test suite enabled by using the kernel arguments
      "kgdbts=V1F100 kgdbwait"
   ## If kgdb arch specific implementation has NMI use
      "kgdbts=V1N6F100

2) After the system boot run the basic test.
echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts

3) Run the concurrency tests.  It is best to use n+1
   while loops where n is the number of cpus you have
   in your system.  The example below uses only two
   loops.

## This tests break points on sys_open
while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts
fg # and hit control-c
fg # and hit control-c
## This tests break points on do_fork
while [ 1 ] ; do date > /dev/null ; done &
while [ 1 ] ; do date > /dev/null ; done &
echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts
fg # and hit control-c
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e8d31c20
    • J
      kgdb: core · dc7d5527
      由 Jason Wessel 提交于 
      kgdb core code. Handles the protocol and the arch details.

[ mingo@elte.hu: heavily modified, simplified and cleaned up. ]
[ xemul@openvz.org: use find_task_by_pid_ns ]
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      dc7d5527
  5. 17 4月, 2008 3 次提交
  7. 14 4月, 2008 1 次提交
    • C
      slub: Deal with config variable dependencies · 5b06c853
      由 Christoph Lameter 提交于 
      count_partial() is used by both slabinfo and the sysfs proc support. Move
the function directly before the beginning of the sysfs code so that it can
be easily found. Rework the preprocessor conditional to take into account
that slub sysfs support depends on CONFIG_SYSFS *and* CONFIG_SLUB_DEBUG.

Make CONFIG_SLUB_STATS depend on CONFIG_SLUB_DEBUG and CONFIG_SYSFS. There
is no point of keeping statistics if no one can restrive them.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
      5b06c853
  9. 11 4月, 2008 1 次提交
  11. 08 4月, 2008 1 次提交
  13. 04 4月, 2008 2 次提交
  15. 31 3月, 2008 1 次提交
    • M
      fix uevent action-string regression · a9edadbf
      由 Mark Lord 提交于 
      Mark Lord wrote:
>
> On boot, syslog is flooded with "uevent: unsupported action-string;" messages.
..
> Mar 28 14:43:29 shrimp kernel: tty ptyqd: uevent: unsupported
> action-string; this will be ignored in a future kernel version
> Mar 28 14:43:29 shrimp kernel: tty ptyqe: uevent: unsupported
> action-string; this will be ignored in a future kernel version
> Mar 28 14:43:29 shrimp kernel: tty ptyqf: uevent: unsupported
> action-string; this will be ignored in a future kernel version
> Mar 28 14:43:29 shrimp kernel: tty ptyr0: uevent: unsupported
> action-string; this will be ignored in a future kernel version
..

These messages are a regression compared with 2.6.24, which did not
flood the syslog with them.

The actual underlying problem was introduced in 2.6.23, when somebody
made the string parsing no longer accept nul-terminated strings as a
valid input to store_uevent().

Eg.  "add\0" was valid prior to 2.6.23, where the code regressed to
require "add" without the '\0'.

This patch fixes the 2.6.23 / 2.6.24 regressions, by having the code
once again tolerate the trailing '\0', if present.

According to GregKH, this mainly affects older Ubuntu systems, such as
the one I have here that requires this fix.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9edadbf
  17. 29 3月, 2008 1 次提交
  19. 28 3月, 2008 1 次提交
  21. 25 3月, 2008 1 次提交
  23. 17 3月, 2008 1 次提交
  25. 14 3月, 2008 1 次提交
    • J
      avoid endless loops in lib/swiotlb.c · b15a3891
      由 Jan Beulich 提交于 
      Commit 681cc5cd ("iommu sg merging:
swiotlb: respect the segment boundary limits") introduced two
possibilities for entering an endless loop in lib/swiotlb.c:

 - if max_slots is zero (possible if mask is ~0UL)
 - if the number of slots requested fits into a swiotlb segment, but is
   too large for the part of a segment which remains after considering
   offset_slots

This fixes them
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b15a3891
  27. 05 3月, 2008 2 次提交
  29. 24 2月, 2008 2 次提交
  31. 15 2月, 2008 1 次提交
  33. 10 2月, 2008 2 次提交
  35. 09 2月, 2008 5 次提交
    • G
      lib/scatterlist.o needed by a module only - link it in unconditionally · 4600ecfc
      由 Guennadi Liakhovetski 提交于 
      lib/scatterlist.c is needed by drivers/media/video/videobuf-dma-sg.c, and
we would like to be able to use the latter without PCI too, for example, on
PXA270 ARM CPU.  It is then possible to create a configuration with
CONFIG_BLOCK=n, where only module code will need scatterlist.c.  Therefore
it must be in obj-y.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4600ecfc
    • Y
      Add new string functions strict_strto* and convert kernel params to use them · 06b2a76d
      由 Yi Yang 提交于 
      Currently, for every sysfs node, the callers will be responsible for
implementing store operation, so many many callers are doing duplicate
things to validate input, they have the same mistakes because they are
calling simple_strtol/ul/ll/uul, especially for module params, they are
just numeric, but you can echo such values as 0x1234xxx, 07777888 and
1234aaa, for these cases, module params store operation just ignores
succesive invalid char and converts prefix part to a numeric although input
is acctually invalid.

This patch tries to fix the aforementioned issues and implements
strict_strtox serial functions, kernel/params.c uses them to strictly
validate input, so module params will reject such values as 0x1234xxxx and
returns an error:

write error: Invalid argument

Any modules which export numeric sysfs node can use strict_strtox instead of
simple_strtox to reject any invalid input.

Here are some test results:

Before applying this patch:

[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#

After applying this patch:

[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo -n 4096 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#

[akpm@linux-foundation.org: fix compiler warnings]
[akpm@linux-foundation.org: fix off-by-one found by tiwai@suse.de]
Signed-off-by: NYi Yang <yi.y.yang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      06b2a76d
    • C
      libfs: allow error return from simple attributes · 8b88b099
      由 Christoph Hellwig 提交于 
      Sometimes simple attributes might need to return an error, e.g. for
acquiring a mutex interruptibly.  In fact we have that situation in
spufs already which is the original user of the simple attributes.  This
patch merged the temporarily forked attributes in spufs back into the
main ones and allows to return errors.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8b88b099
    • H
      lib: remove fastcall from lib/* · 9f741cb8
      由 Harvey Harrison 提交于 
      [akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9f741cb8
    • D
      mn10300: add the MN10300/AM33 architecture to the kernel · b920de1b
      由 David Howells 提交于 
      Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: NMasakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: NKoichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b920de1b
  37. 08 2月, 2008 1 次提交
    • C
      SLUB: Support for performance statistics · 8ff12cfc
      由 Christoph Lameter 提交于 
      The statistics provided here allow the monitoring of allocator behavior but
at the cost of some (minimal) loss of performance. Counters are placed in
SLUB's per cpu data structure. The per cpu structure may be extended by the
statistics to grow larger than one cacheline which will increase the cache
footprint of SLUB.

There is a compile option to enable/disable the inclusion of the runtime
statistics and its off by default.

The slabinfo tool is enhanced to support these statistics via two options:

-D 	Switches the line of information displayed for a slab from size
	mode to activity mode.

-A	Sorts the slabs displayed by activity. This allows the display of
	the slabs most important to the performance of a certain load.

-r	Report option will report detailed statistics on

Example (tbench load):

slabinfo -AD		->Shows the most active slabs

Name                   Objects    Alloc     Free   %Fast
skbuff_fclone_cache         33 111953835 111953835  99  99
:0000192                  2666  5283688  5281047  99  99
:0001024                   849  5247230  5246389  83  83
vm_area_struct            1349   119642   118355  91  22
:0004096                    15    66753    66751  98  98
:0000064                  2067    25297    23383  98  78
dentry                   10259    28635    18464  91  45
:0000080                 11004    18950     8089  98  98
:0000096                  1703    12358    10784  99  98
:0000128                   762    10582     9875  94  18
:0000512                   184     9807     9647  95  81
:0002048                   479     9669     9195  83  65
anon_vma                   777     9461     9002  99  71
kmalloc-8                 6492     9981     5624  99  97
:0000768                   258     7174     6931  58  15

So the skbuff_fclone_cache is of highest importance for the tbench load.
Pretty high load on the 192 sized slab. Look for the aliases

slabinfo -a | grep 000192
:0000192     <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP
	request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili

Likely skbuff_head_cache.


Looking into the statistics of the skbuff_fclone_cache is possible through

slabinfo skbuff_fclone_cache	->-r option implied if cache name is mentioned


.... Usual output ...

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath             111953360 111946981  99  99
Slowpath                 1044     7423   0   0
Page Alloc                272      264   0   0
Add partial                25      325   0   0
Remove partial             86      264   0   0
RemoteObj/SlabFrozen      350     4832   0   0
Total                111954404 111954404

Flushes       49 Refill        0
Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%)

Looks good because the fastpath is overwhelmingly taken.


skbuff_head_cache:

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath              5297262  5259882  99  99
Slowpath                 4477    39586   0   0
Page Alloc                937      824   0   0
Add partial                 0     2515   0   0
Remove partial           1691      824   0   0
RemoteObj/SlabFrozen     2621     9684   0   0
Total                 5301739  5299468

Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%)


Descriptions of the output:

Total:		The total number of allocation and frees that occurred for a
		slab

Fastpath:	The number of allocations/frees that used the fastpath.

Slowpath:	Other allocations

Page Alloc:	Number of calls to the page allocator as a result of slowpath
		processing

Add Partial:	Number of slabs added to the partial list through free or
		alloc (occurs during cpuslab flushes)

Remove Partial:	Number of slabs removed from the partial list as a result of
		allocations retrieving a partial slab or by a free freeing
		the last object of a slab.

RemoteObj/Froz:	How many times were remotely freed object encountered when a
		slab was about to be deactivated. Frozen: How many times was
		free able to skip list processing because the slab was in use
		as the cpuslab of another processor.

Flushes:	Number of times the cpuslab was flushed on request
		(kmem_cache_shrink, may result from races in __slab_alloc)

Refill:		Number of times we were able to refill the cpuslab from
		remotely freed objects for the same slab.

Deactivate:	Statistics how slabs were deactivated. Shows how they were
		put onto the partial list.

In general fastpath is very good. Slowpath without partial list processing is
also desirable. Any touching of partial list uses node specific locks which
may potentially cause list lock contention.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      8ff12cfc
  39. 07 2月, 2008 2 次提交
  41. 06 2月, 2008 3 次提交
    • N
      radix-tree: avoid atomic allocations for preloaded insertions · e2848a0e
      由 Nick Piggin 提交于 
      Most pagecache (and some other) radix tree insertions have the great
opportunity to preallocate a few nodes with relaxed gfp flags.  But the
preallocation is squandered when it comes time to allocate a node, we
default to first attempting a GFP_ATOMIC allocation -- that doesn't
normally fail, but it can eat into atomic memory reserves that we don't
need to be using.

Another upshot of this is that it removes the sometimes highly contended
zone->lock from underneath tree_lock.  Pagecache insertions are always
performed with a radix tree preload, and after this change, such a
situation will never fall back to kmem_cache_alloc within
radix_tree_node_alloc.

David Miller reports seeing this allocation fail on a highly threaded
sparc64 system:

[527319.459981] dd: page allocation failure. order:0, mode:0x20
[527319.460403] Call Trace:
[527319.460568]  [00000000004b71e0] __slab_alloc+0x1b0/0x6a8
[527319.460636]  [00000000004b7bbc] kmem_cache_alloc+0x4c/0xa8
[527319.460698]  [000000000055309c] radix_tree_node_alloc+0x20/0x90
[527319.460763]  [0000000000553238] radix_tree_insert+0x12c/0x260
[527319.460830]  [0000000000495cd0] add_to_page_cache+0x38/0xb0
[527319.460893]  [00000000004e4794] mpage_readpages+0x6c/0x134
[527319.460955]  [000000000049c7fc] __do_page_cache_readahead+0x170/0x280
[527319.461028]  [000000000049cc88] ondemand_readahead+0x208/0x214
[527319.461094]  [0000000000496018] do_generic_mapping_read+0xe8/0x428
[527319.461152]  [0000000000497948] generic_file_aio_read+0x108/0x170
[527319.461217]  [00000000004badac] do_sync_read+0x88/0xd0
[527319.461292]  [00000000004bb5cc] vfs_read+0x78/0x10c
[527319.461361]  [00000000004bb920] sys_read+0x34/0x60
[527319.461424]  [0000000000406294] linux_sparc_syscall32+0x3c/0x40

The calltrace is significant: __do_page_cache_readahead allocates a number
of pages with GFP_KERNEL, and hence it should have reclaimed sufficient
memory to satisfy GFP_ATOMIC allocations.  However after the list of pages
goes to mpage_readpages, there can be significant intervals (including disk
IO) before all the pages are inserted into the radix-tree.  So the reserves
can easily be depleted at that point.  The patch is confirmed to fix the
problem.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e2848a0e
    • F
      iommu sg merging: swiotlb: respect the segment boundary limits · 681cc5cd
      由 FUJITA Tomonori 提交于 
      This patch makes swiotlb not allocate a memory area spanning LLD's segment
boundary.

is_span_boundary() judges whether a memory area spans LLD's segment boundary.
If map_single finds such a area, map_single tries to find the next available
memory area.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      681cc5cd
    • F
      iommu sg: add IOMMU helper functions for the free area management · 0291df8c
      由 FUJITA Tomonori 提交于 
      This adds IOMMU helper functions for the free area management.  These
functions take care of LLD's segment boundary limit for IOMMUs.  They would be
useful for IOMMUs that use bitmap for the free area management.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0291df8c
  43. 03 2月, 2008 3 次提交