- 04 9月, 2014 8 次提交
-
-
由 Ville Syrjälä 提交于
Jani wanted some comments to explain why we call certain vdd on/off functions in certain places. v2: Make the comments more thorough (Imre) Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
We need to turn the DP port off after the pipe, otherwise the pipe won't turn off properly on certain pch platforms at least (happens on my ILK for example). This also matches the BSpec modeset sequence better. We still don't match the spec exactly though (eg. audio disable should happen much earlier), but at last this eliminates the nasty wait_for_pipe_off() timeouts. We already did the port disable after the pipe for VLV/CHV and for CPU eDP. For g4x leave the port disable where it is since that matches the modeset sequence in the documentation and I don't have a suitable machine to test if the other order would work. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Bspec says we should enable the DP port before enabling panel power, and that the port must be enabled with training pattern 1. Do so. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
On VLV/CHV the panel power sequencer may need to be "kicked" a bit to lock onto the new port, and that needs to happen before any aux transfers are attempted if we want the aux transfers to actaully succeed. So turn on panel power (part of the "kick") before aux transfers (DPMS_ON + link training). This also matches the documented modeset sequence better for pch platforms. The documentation doesn't explicitly state anything about the DPMS or link training DPCD writes, but the panel power on step is always listed before link training is mentioned. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NImre Deak <imre.deak@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=70117Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Try to make sure we find the power sequencer that the BIOS used by first looking for one which has the panel power enabled, then fall back to one with VDD force bit enabled, and finally look at just the port select bits. This should make us pick the correct power sequencer when the BIOS has already enabled the panel. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NImre Deak <imre.deak@intel.com> [danvet: Shorten the vlv_intial_pps_pipe to make lines fit into 80 chars.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
The power sequencer loses its state when the disp2d power well is down. Clear the dev_priv->pps_pipe tracking so that the power sequencer state gets reinitialized the next time it's needed. v2: Fix the pps_mutex vs. power_domain mutex deadlock by taking power domain reference first v3: Rename from edp_pps_(un)lock() to just pps_(un)lock() for the future, update due to backlight code changes Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
VLV/CHV have a per-pipe panel power sequencer which locks onto the port once used. We need to keep track wich power sequencers are locked to which ports. v2: remove spurious whitespace change, rebase due to backlight changes (Imre) Reviewed-by: NAntti Koskipaa <antti.koskipaa@linux.intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> [danvet: Break some really long lines to appease checkpatch a bit.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Introduce a new mutex (pps_mutex) to protect the power sequencer state. For now this state includes want_panel_vdd as well as the power sequencer registers. We need a single mutex (as opposed to per port) because later on we will need to deal with VLV/CHV which have multiple power sequencer which can be reassigned to different ports. v2: Add the locking to intel_dp_encoder_suspend too (Imre) v3: Take care intel_edp_backlight_power() and _intel_edp_backlight_on/off(), deal with reboot notifier vlv_power_sequencer_pipe() call (Imre) Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 9月, 2014 17 次提交
-
-
由 Chris Wilson 提交于
As we may query the edid multiple times following a detect, record the EDID found during output discovery and reuse it. This is a separate issue from caching the output EDID across detection cycles. v2: Implement connector->force() callback so that edid is associated with the connector for user overrides as well (Ville) Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
Both gmch and pch detection routines used the exact same routine for eDP, so de-duplicate. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: N: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Sonika Jindal 提交于
Rename the defines to have levels instead of values for vswing and pre-emph levels as the values may differ in other scenarios like low vswing of eDP1.4 where the values are different. Done using following cocci patch for each define: @@ @@ # define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) + # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) ... Signed-off-by: NSonika Jindal <sonika.jindal@intel.com> Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Andy Shevchenko 提交于
There is no need to use hex_dump_to_buffer() since we have a kernel helper to dump up to 64 bytes just via printk(). In our case the actual size is 15 bytes. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> [danvet: Add cast since %*ph expects and int for the size parameter.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Sonika Jindal 提交于
Renaming the HSW-specific macros for ddi buffer translation slot to denote the slot and not the vswing/pre-emph values as they are platform-dependent. This patch is based on top of the patch series for renaming the DP training vswing/pre-emph defines: http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html v2: Creating single macro with argument for slot number (Damien) v3: Adding macro for num of translation entries (Damien) Signed-off-by: NSonika Jindal <sonika.jindal@intel.com> Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Less pointless indentation is always nice. There will be a bit more code in this function once the power sequencer locking is fixed. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
If we force vdd off warn if someone is still using it. With this change the delayed vdd off work needs to check want_panel_vdd itself to make sure it doesn't try to turn vdd off when someone is using it. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Looks nicer. Not functional change. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> [danvet: Add "No functional change" as requested by Jani.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Add a comment to explain why we care about the current want_panel_vdd state in intel_dp_aux_ch(). Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
edp_* are now the lower level functions and intel_edp_* the higher level ones. One should use them in pairs. v2: Don't return void (Jani) Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
We want to use the higher level vdd on func here. Not a big deal yet (we'd just get the warn when things go awry) but when the locking gets fixed this becomes more important. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Passing the port as a parameter to PANEL_PORT_SELECT_VLV results in neater code. Sadly the PCH port select bits aren't suitable for the same treatment and the resulting macro would be much uglier, so leave those defines as is. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
Chris has decided that enough is enough. It's time to fixup dev Vs dev_priv. This is a modest contribution to the crusade. v2: Still use INTEL_INFO(), for the (mythical!) case we want to hardcode the info struct with defines (Chris) Rename the macro argument from 'dev' to 'dev_priv' (Jani) v3: Use names unlikely to be used as macro arguments (Chris) Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
This lets the userspace switch off the backlight using the backlight class sysfs bl_power file. The switch is done using the power sequencer; the backlight PWM, and everything else, remains enabled. The display backlight won't draw power, but for maximum power savings the encoder needs to be switched off. Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com> Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Make it possible to change panel power control backlight state without touching the PWM. No functional changes. Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com> Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 01 9月, 2014 1 次提交
-
-
由 Dave Airlie 提交于
In the HPD pulse handler we check for long pulses if the port is actually connected, however we do that for IBX, but we use the pulse handling code on GM45 systems as well, so we need to use a diffent check. This patch refactors the digital port connected check out of the g4x detection path and reuses it in the hpd pulse path. Fixes: http://lkml.kernel.org/r/1409382202.5141.36.camel@marge.simpson.netReported-by: NMike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 18 8月, 2014 3 次提交
-
-
由 Imre Deak 提交于
Atm we may retrain the DP link even if the CRTC is inactive through HPD work->intel_dp_check_link_status(). This in turn can lock up the PHY (at least on BYT), since the DP port is disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81948Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Atm we may leave eDP VDD enabled during system suspend after the CRTCs are disabled through an HPD->DPCD read event. So disable VDD during suspend at a point when no HPDs can occur. Note that runtime suspend doesn't have the same problem, since there the RPM ref held by VDD provides already the needed serialization. v2: - add note to commit message about the runtime suspend path (Ville) - use edp_panel_vdd_off_sync(), so we can keep the WARN in edp_panel_vdd_off() (Ville) v3: - rebased on -fixes (for_each_intel_encoder()->list_for_each_entry()) (Imre) Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2) Cc: stable@vger.kernel.org (3.16+) [Jani: fix sparse warning reported by Fengguang Wu] Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Ville noticed that we can call ibx_digital_port_connected() which accesses the HW without holding any power well/runtime pm reference. Fix this by holding a display port power domain reference around the whole hpd_pulse handler. Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 12 8月, 2014 1 次提交
-
-
由 Ville Syrjälä 提交于
Don't print raw numbers, use port_name() and tell the user whether it's long or short without having to figure out what the other magic number means. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 8月, 2014 6 次提交
-
-
由 Damien Lespiau 提交于
While those messages are interesting, there aren't _that_ interesting. We don't need them in the kernel logs by default. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
CHV display PHY registes have two swing margin/deemph settings. Make it clear which ones we're using. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
CHV was forgotten the intel_{dp,hdmi}_prepare() were introduced (or the chv patches were still in flight?). Call these when enabling the ports. Things tend to work much better when we actually write something to the port registers :) Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
Future platform will use config->ddi_pll_sel in a different way. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
CHV supports DP training pattern 3. Add the required stuff. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Vandana Kannan 提交于
For Gen < 8, set M2_N2 registers on every mode set. This is required to make sure M2_N2 registers are set during boot, resume from sleep for cross- checking the state. The register is set only if DRRS is supported. v2: Patch rebased v3: Daniel's review comments - Removed HAS_DRRS(dev) and added bool has_drrs to pipe_config to track drrs support v4: Jesse's review comments - Made changes to set m2_n2 in intel_dp_set_m_n() Signed-off-by: NVandana Kannan <vandana.kannan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 07 8月, 2014 3 次提交
-
-
由 Daniel Vetter 提交于
Since I've reworked psr support to no longer require x-tiling we don't check any state protected by the Giant GEM Lock. So drop that check. Also boo for lockdep_assert_held for not yelling when lockdep is disabled. Cc: Paulo Zanoni <przanoni@gmail.com> Reported-by: NPaulo Zanoni <przanoni@gmail.com> Acked-by: NPaulo Zanoni <przanoni@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
Just like during booting the BIOS can leave the VDD bit enabled after system resume. So apply the same state sanitization there too. This fixes a problem where after resume the port power domain refcount gets unbalanced. v2: - unchanged v3: - call edp sanitizing from the encoder reset handler (Daniel) Reported-and-tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
This will be needed by an upcoming patch too that needs to sanitize the VDD state during resume. The additional async disabling is only needed for the resume path, here it doesn't make a difference since we enable VDD right after the sanitize call. v2: - don't set intel_dp ptr for non-eDP encoders (Ville) Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 8月, 2014 1 次提交
-
-
由 Dave Airlie 提交于
We need to take the connection mutex around the link status check for non-MST case, but also around the MST link training on short HPDs. I suspect we actually should have a dpcd lock in the future as well, that just lock the local copies of dpcd and flags stored from that. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-