- 18 10月, 2018 2 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 06 10月, 2018 2 次提交
-
-
由 Dave Chinner 提交于
When reflinking sub-file ranges, a data corruption can occur when the source file range includes a partial EOF block. This shares the unknown data beyond EOF into the second file at a position inside EOF, exposing stale data in the second file. XFS only supports whole block sharing, but we still need to support whole file reflink correctly. Hence if the reflink request includes the last block of the souce file, only proceed with the reflink operation if it lands at or past the destination file's current EOF. If it lands within the destination file EOF, reject the entire request with -EINVAL and make the caller go the hard way. This avoids the data corruption vector, but also avoids disruption of returning EINVAL to userspace for the common case of whole file cloning. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
A deduplication data corruption is Exposed by fstests generic/505 on XFS. It is caused by extending the block match range to include the partial EOF block, but then allowing unknown data beyond EOF to be considered a "match" to data in the destination file because the comparison is only made to the end of the source file. This corrupts the destination file when the source extent is shared with it. XFS only supports whole block dedupe, but we still need to appear to support whole file dedupe correctly. Hence if the dedupe request includes the last block of the souce file, don't include it in the actual XFS dedupe operation. If the rest of the range dedupes successfully, then report the partial last block as deduped, too, so that userspace sees it as a successful dedupe rather than return EINVAL because we can't dedupe unaligned blocks. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 05 10月, 2018 3 次提交
-
-
由 Darrick J. Wong 提交于
Before cloning into a file, update the ctime and remove sensitive attributes like suid, just like we'd do for a regular file write. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Darrick J. Wong 提交于
When we're reflinking between two files and the destination file range is well beyond the destination file's EOF marker, zero any posteof speculative preallocations in the destination file so that we don't expose stale disk contents. The previous strategy of trying to clear the preallocations does not work if the destination file has the PREALLOC flag set. Uncovered by shared/010. Reported-by: NZorro Lang <zlang@redhat.com> Bugzilla-id: https://bugzilla.kernel.org/show_bug.cgi?id=201259Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Darrick J. Wong 提交于
Refactor all the reflink preparation steps into a separate helper that we'll use to land all the upcoming fixes for insufficient input checks. This rework also moves the invalidation of the destination range to the prep function so that it is done before the range is remapped. This ensures that nobody can access the data in range being remapped until the remap is complete. [dgc: fix xfs_reflink_remap_prep() return value and caller check to handle vfs_clone_file_prep_inodes() returning 0 to mean "nothing to do". ] [dgc: make sure length changed by vfs_clone_file_prep_inodes() gets propagated back to XFS code that does the remapping. ] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 29 9月, 2018 2 次提交
-
-
由 Christoph Hellwig 提交于
The iomap direct I/O code issues a single ->end_io call for the whole I/O request, and if some of the extents cowered needed a COW operation it will call xfs_reflink_end_cow over the whole range. When we do AIO writes we drop the iolock after doing the initial setup, but before the I/O completion. Between dropping the lock and completing the I/O we can have a racing buffered write create new delalloc COW fork extents in the region covered by the outstanding direct I/O write, and thus see delalloc COW fork extents in xfs_reflink_end_cow. As concurrent writes are fundamentally racy and no guarantees are given we can simply skip those. This can be easily reproduced with xfstests generic/208 in always_cow mode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
When xfs_reflink_allocate_cow() allocates a transaction, it drops the ILOCK to perform the operation. This Introduces a race condition where another thread modifying the file can perform the COW allocation operation underneath us. This result in the retry loop finding an allocated block and jumping straight to the conversion code. It does not, however, cancel the transaction it holds and so this gets leaked. This results in a lockdep warning: ================================================ WARNING: lock held when returning to user space! 4.18.5 #1 Not tainted ------------------------------------------------ worker/6123 is leaving the kernel with locks still held! 1 lock held by worker/6123: #0: 000000009eab4f1b (sb_internal#2){.+.+}, at: xfs_trans_alloc+0x17c/0x220 And eventually the filesystem deadlocks because it runs out of log space that is reserved by the leaked transaction and never gets released. The logic flow in xfs_reflink_allocate_cow() is a convoluted mess of gotos - it's no surprise that it has bug where the flow through several goto jumps then fails to clean up context from a non-obvious logic path. CLean up the logic flow and make sure every path does the right thing. Reported-by: NAlexander Y. Fomichev <git.user@gmail.com> Tested-by: NAlexander Y. Fomichev <git.user@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200981Signed-off-by: NDave Chinner <dchinner@redhat.com> [hch: slight refactor] Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 03 8月, 2018 5 次提交
-
-
由 Brian Foster 提交于
struct xfs_defer_ops has now been reduced to a single list_head. The external dfops mechanism is unused and thus everywhere a (permanent) transaction is accessible the associated dfops structure is as well. Remove the xfs_defer_ops structure and fold the list_head into the transaction. Also remove the last remnant of external dfops in xfs_trans_dup(). Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
The majority of remaining references to struct xfs_defer_ops in XFS are associated with xfs_defer_add(). At this point, there are no more external xfs_defer_ops users left. All instances of xfs_defer_ops are embedded in the transaction, which means we can safely pass the transaction down to the dfops add interface. Update xfs_defer_add() to receive the transaction as a parameter. Various subsystems implement wrappers to allocate and construct the context specific data structures for the associated deferred operation type. Update these to also carry the transaction down as needed and clean up unused dfops parameters along the way. This removes most of the remaining references to struct xfs_defer_ops throughout the code and facilitates removal of the structure. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> [darrick: fix unused variable warnings with ftrace disabled] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
The current semantics of xfs_defer_finish() require the caller to call xfs_defer_cancel() on error. This is slightly inconsistent with transaction commit error handling where a failed commit cleans up the transaction before returning. More significantly, the only requirement for exposure of ->dop_pending outside of xfs_defer_finish() is so that xfs_defer_cancel() can drain it on error. Since the only recourse of xfs_defer_finish() errors is cancellation, mirror the transaction logic and cancel remaining dfops before returning from xfs_defer_finish() with an error. Beside simplifying xfs_defer_finish() semantics, this ensures that xfs_defer_finish() always returns with an empty ->dop_pending and thus facilitates removal of the list from xfs_defer_ops. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Inodes that are held across deferred operations are explicitly joined to the dfops structure to ensure appropriate relogging. While inodes are currently joined explicitly, we can detect the conditions that require relogging at dfops finish time by inspecting the transaction item list for inodes with ili_lock_flags == 0. Replace the xfs_defer_ijoin() infrastructure with such detection and automatic relogging of held inodes. This eliminates the need for the per-dfops inode list, replaced by an on-stack variant in xfs_defer_trans_roll(). Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Log items that require relogging during deferred operations processing are explicitly joined to the associated dfops via the xfs_defer_*join() helpers. These calls imply that the associated object is "held" by the transaction such that when rolled, the item can be immediately joined to a follow up transaction. For buffers, this means the buffer remains locked and held after each roll. For inodes, this means that the inode remains locked. Failure to join a held item to the dfops structure means the associated object pins the tail of the log while dfops processing completes, because the item never relogs and is not unlocked or released until deferred processing completes. Currently, all buffers that are held in transactions (XFS_BLI_HOLD) with deferred operations are explicitly joined to the dfops. This is not the case for inodes, however, as various contexts defer operations to transactions with held inodes without explicit joins to the associated dfops (and thus not relogging). While this is not a catastrophic problem, it is not ideal. Given that we want to eventually relog such items automatically during dfops processing, start by explicitly adding these missing xfs_defer_ijoin() calls. A call is added everywhere an inode is joined to a transaction without transferring lock ownership and said transaction runs deferred operations. All xfs_defer_ijoin() calls will eventually be replaced by automatic dfops inode relogging. This patch essentially implements the behavior change that would otherwise occur due to automatic inode dfops relogging. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 30 7月, 2018 1 次提交
-
-
由 Christoph Hellwig 提交于
We have a few places that already check if an inode has actual data in the COW fork to avoid work on reflink inodes that do not actually have outstanding COW blocks. There are a few more places that can avoid working if doing the same check, so add a documented helper for this condition and use it in all places where it makes sense. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 27 7月, 2018 3 次提交
-
-
由 Brian Foster 提交于
Every caller of xfs_defer_finish() now passes the transaction and its associated ->t_dfops. The xfs_defer_ops parameter is therefore no longer necessary and can be removed. Since most xfs_defer_finish() callers also have to consider xfs_defer_cancel() on error, update the latter to also receive the transaction for consistency. The log recovery code contains an outlier case that cancels a dfops directly without an available transaction. Retain an internal wrapper to support this outlier case for the time being. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
At this point, the transaction subsystem completely manages deferred items internally such that the common and boilerplate xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() -> xfs_trans_commit() sequence can be replaced with a simple transaction allocation and commit. Remove all such boilerplate deferred ops code. In doing so, we change each case over to use the dfops in the transaction and specifically eliminate: - The on-stack dfops and associated xfs_defer_init() call, as the internal dfops is initialized on transaction allocation. - xfs_bmap_finish() calls that precede a final xfs_trans_commit() of a transaction. - xfs_defer_cancel() calls in error handlers that precede a transaction cancel. The only deferred ops calls that remain are those that are non-deterministic with respect to the final commit of the associated transaction or are open-coded due to special handling. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
All callers either explicitly initialize a dfops or pass a transaction with an internal dfops. Drop the hacky old dfops replacement logic and use the one associated with the transaction. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 24 7月, 2018 1 次提交
-
-
由 Darrick J. Wong 提交于
The error argument to xfs_btree_del_cursor already understands the "nonzero for error" semantics, so remove pointless error testing in the callers and pass it directly. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 12 7月, 2018 17 次提交
-
-
由 Brian Foster 提交于
All but one caller of xfs_defer_init() passes in the ->t_firstblock of the associated transaction. The one outlier is xlog_recover_process_intents(), which simply passes a dummy value because a valid pointer is required. This firstblock variable can simply be removed. At this point we could remove the xfs_defer_init() firstblock parameter and initialize ->t_firstblock directly. Even that is not necessary, however, because ->t_firstblock is automatically reinitialized in the new transaction on a transaction roll. Since xfs_defer_init() should never occur more than once on a particular transaction (since the corresponding finish will roll it), replace the reinit from xfs_defer_init() with an assert that verifies the transaction has a NULLFSBLOCK firstblock. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
All callers pass ->t_firstblock from the current transaction. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
All callers pass ->t_firstblock from the current transaction. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Convert all xfs_bunmapi() callers to ->t_firstblock. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Convert all xfs_bmapi_write() users to ->t_firstblock. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
xfs_bmapi_write() always expects a valid firstblock pointer. It immediately dereferences the pointer to help determine how to initialize the bma.minleft field. The remaining accesses are related to modifying btree format forks, which is only relevant for !COW fork callers. The reflink code passes a NULL transaction to xfs_bmapi_write() in a couple places that do COW fork unwritten conversion. The purpose of the firstblock field is to track the first block allocation in the current transaction, so technically firstblock should not be required for these callers either. Tweak xfs_bmapi_write() to initialize the bma correctly without accessing the firstblock pointer if no transaction is provided in the first place. Update the reflink callers to pass NULL instead of otherwise unused firstblock references. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Most callers of xfs_defer_init() immediately attach the dfops structure to a transaction. Add a transaction parameter to eliminate much of this boilerplate code. This also helps self-document the fact that many codepaths now expect a dfops pointer implicitly via xfs_trans->t_dfops. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Use ->t_dfops of the transaction from the caller. Reset it before we return to avoid leaks of local stack memory. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
The xfs_btree_cur.bc_private.a.dfops field is only ever initialized by the refcountbt cursor init function. The only caller of that function with a non-NULL dfops is from deferred completion context, which already has attached to ->t_dfops. In addition to that, the only actual reference of a.dfops is the cursor duplication function, which means the field is effectively unused. Remove the dfops field from the bc_private.a union. Any future users can acquire the dfops from the transaction. This patch does not change behavior. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Now that all xfs_bunmapi() callers use ->t_dfops, remove the unnecessary parameter and access ->t_dfops directly. This patch does not change behavior. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares the latter to no longer require a dfops parameter. Note that xfs_itruncate_extents_flags() associates a local dfops with a transaction provided from the caller. Since there are multiple callers, set and reset ->t_dfops before the function returns to avoid exposure of stack memory to the caller. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops parameter is no longer necessary. Remove it and access ->t_dfops directly. This patch does not change behavior. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
Attach ->t_dfops for all remaining callers of xfs_bmapi_write(). This prepares the latter to no longer require a separate dfops parameter. Note that xfs_symlink() already uses ->t_dfops. Fix up the local references for consistency. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
A couple COW fork unwritten extent conversion helpers pass an uninitialized dfops pointer to xfs_bmapi_write(). This does not cause problems because conversion does not use a transaction or the dfops structure for the COW fork. Drop the uninitialized usage of dfops in these codepaths and pass NULL along to xfs_bmapi_write() instead. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
We only have one caller left, and open coding the simple extent list lookup in it allows us to make the code both more understandable and reuse calculations and variables already present. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
We already have to check for overlapping COW extents everytime we come back to a page in xfs_writepage_map / xfs_map_cow, so this additional trim is not required. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 07 6月, 2018 1 次提交
-
-
由 Dave Chinner 提交于
Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 10 5月, 2018 3 次提交
-
-
由 Darrick J. Wong 提交于
There are two uses of dqget here -- one is to return the dquot for a given type and id, and the other is to return the dquot for a given type and inode. Those are two separate things, so split them into two smaller functions. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
The flags argument is always zero, get rid of it. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Dave Chinner 提交于
xfs_reflink_clear_inode_flag double-joins an inode to a transaction, which is not allowed. Fix that and document that the caller must have already joined it. Signed-Off-By: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> [darrick: edit out trace for nonexistent ASSERT] Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-