- 09 10月, 2013 1 次提交
-
-
由 Pali Rohár 提交于
File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NJoerg Reisenweber <joerg@openmoko.org> [tony@atomide.com: updated comments to describe regression] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 8月, 2013 1 次提交
-
-
由 Tomi Valkeinen 提交于
Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 12 6月, 2013 1 次提交
-
-
由 Tomi Valkeinen 提交于
SDI driver gets currently the vdds_sdi regulator via omapdss device. This is not correct, and we'll change the SDI driver to get the regulator directly via omapdss_sdi.0 device. This patch changes the rx51 board file to add vdds_dsi supply for omapdss_sdi.0 device. Note that the vdds_sdi supply for omapdss device is still left there, as the current display driver uses it. When both the board files and the display driver has been changed, we can remove the unused supply. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 5月, 2013 1 次提交
-
-
由 Aaro Koskinen 提交于
Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Joni Lapilainen <joni.lapilainen@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable@vger.kernel.org Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Aaro Koskinen 提交于
Add missing regulator definitions for lis3lv02d accelerometer. Fixes the following probe issue: [ 57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517 [ 57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral Reported-by: NPali Rohár <pali.rohar@gmail.com> Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 07 2月, 2013 1 次提交
-
-
由 Milo(Woogyom) Kim 提交于
The LP55xx common driver provides a new header, leds-lp55xx.h. This driver enables removing duplicate code for both drivers and making coherent driver structure. LP5521 and LP5523/55231 platform data were merged into one common file. Therefore, the LP5521/5523 platform code need to be fixed. This patch has been already acked. For ux500: https://lkml.org/lkml/2012/10/11/417Acked-by: NLinus Walleij <linus.walleij@linaro.org> For omap: https://lkml.org/lkml/2012/10/11/334Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: NBryan Wu <cooloney@gmail.com>
-
- 02 2月, 2013 2 次提交
-
-
由 Pali Rohár 提交于
Register twl4030-madc device Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Pali Rohár 提交于
Add leds lp5523 names from Maemo 5 2.6.28 kernel Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 1月, 2013 1 次提交
-
-
由 Jonathan Cameron 提交于
This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging. Signed-off-by: NJonathan Cameron <jic23@kernel.org> Acked-by: NPeter Meerwald <pmeerw@pmeerw.net>
-
- 17 12月, 2012 1 次提交
-
-
由 Pali Rohár 提交于
This is needed to make the battery monitor actually work on Nokia N900. Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
-
- 01 12月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 19 10月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
We must move this for ARM common zImage support. Note that neither drivers/media/rc/ir-rx51.c or drivers/media/platform/omap3isp/ispvideo.c need to include omap-pm.h, so this patch removes the include for those files. Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: linux-media@vger.kernel.org Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 16 10月, 2012 1 次提交
-
-
由 Lokesh Vutla 提交于
Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 15 10月, 2012 2 次提交
-
-
由 Afzal Mohammed 提交于
Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: NAfzal Mohammed <afzal@ti.com>
-
由 Afzal Mohammed 提交于
For common arm zImage existing onenand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Signed-off-by: NAfzal Mohammed <afzal@ti.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Shubhrajyoti D 提交于
rx51_si4713_dev is referenced only from rx51_init_si4713. So the memory for rx51_si4713_dev can be safely freed after init. Also it references rx51_si4713_board_info which is __initdata_or_module. fixes the below warning. WARNING: vmlinux.o(.data+0x30958): Section mismatch in reference from the variable rx51_si4713_dev to the (unknown reference) .init.data:(unknown) The variable rx51_si4713_dev references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Reported-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 21 9月, 2012 2 次提交
-
-
由 Tony Lindgren 提交于
This can be local to mach-omap2. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This can be local to mach-omap2. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 19 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NTony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
-
- 13 9月, 2012 2 次提交
-
-
由 Tony Lindgren 提交于
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 11 9月, 2012 1 次提交
-
-
由 Igor Grinberg 提交于
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NChris Ball <cjb@laptop.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 14 8月, 2012 1 次提交
-
-
由 Timo Kokkonen 提交于
The IR diode on the RX51 is connected to the GPT9. This data is needed for the IR driver to function. Signed-off-by: NTimo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 04 6月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
Commit 3b511201 (ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer) added support for lis3lv02d accelerometer. The patch was still using OMAP_GPIO_IRQ which no longer exists. Fix it by using gpio_to_irq(). Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 10 5月, 2012 1 次提交
-
-
由 Ameya Palande 提交于
Platform support for lis3lv02d accelerometer Signed-off-by: NAmeya Palande <ameya.palande@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 13 4月, 2012 1 次提交
-
-
由 Paul Walmsley 提交于
Several function declarations used only in the files in which they're declared should include the static keyword, but don't: arch/arm/mach-omap2/serial.c:248:6: warning: symbol 'cmdline_find_option' was not declared. Should it be static? arch/arm/mach-omap2/omap-wakeupgen.c:259:6: warning: symbol 'irq_sar_clear' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:878:27: warning: symbol 'rx51_vibra_data' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:882:27: warning: symbol 'rx51_audio_data' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:201:29: warning: symbol 'omap_panda_wlan_data' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:393:24: warning: symbol 'omap4_panda_dvi_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:403:12: warning: symbol 'omap4_panda_dvi_init' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:464:6: warning: symbol 'omap4_panda_display_init' was not declared. Should it be static? arch/arm/mach-omap2/hsmmc.c:434:6: warning: symbol 'omap_init_hsmmc' was not declared. Should it be static? arch/arm/mach-omap2/hwspinlock.c:31:12: warning: symbol 'hwspinlocks_init' was not declared. Should it be static? arch/arm/mach-omap1/timer.c:58:12: warning: symbol 'omap1_dm_timer_init' was not declared. Should it be static? arch/arm/mach-omap1/fpga.c:90:6: warning: symbol 'innovator_fpga_IRQ_demux' was not declared. Should it be static? Mark all of these as static. Thanks to Arnd Bergmann <arnd@arndb.de> for pointing out a typo in the original patch description. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: David Anders <x0132446@ti.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 29 3月, 2012 2 次提交
-
-
由 Tarun Kanti DebBarma 提交于
The following commits change gpio-omap to use dynamic IRQ allocation: 25db711d gpio/omap: Fix IRQ handling for SPARSE_IRQ 384ebe1c gpio/omap: Add DT support to GPIO driver With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ is no longer valid. We must be using gpio_to_irq() instead. Signed-off-by: NTarun Kanti DebBarma <tarun.kanti@ti.com> [tony@atomide.com: updated comments] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 David Howells 提交于
Disintegrate asm/system.h for ARM. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Russell King <linux@arm.linux.org.uk> cc: linux-arm-kernel@lists.infradead.org
-
- 06 3月, 2012 1 次提交
-
-
由 Vladimir Zapolskiy 提交于
This change converts TSC2005 related GPIO requests to be done with gpio_request_array() method and explicitly inits mux configuration for these GPIOs. Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Jarkko Nikula 提交于
Flag single_channel in struct omap2_mcspi_device_config is not used by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h and affected board files. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 21 2月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg <grinberg@compulab.co.il>. Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 06 1月, 2012 1 次提交
-
-
由 Pali Rohár 提交于
Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
-
- 14 12月, 2011 2 次提交
-
-
由 Felipe Contreras 提交于
Commit 10299e2e (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Reviewed-by: NSebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Aaro Koskinen 提交于
Enable TSC2005 touchscreen driver on the RX-51 board by providing the needed platform data. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: NSebastian Reichel <sre@debian.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 18 11月, 2011 1 次提交
-
-
由 Tony Lindgren 提交于
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 9月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
The model_id is no longer needed within the platform_data for the TPA driver since the model of TPA specified with the device name (tpa6130a2/tpa6140a2). Also update rx51 (the only affected user) to use the device name rather than platform data. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 7月, 2011 1 次提交
-
-
由 Kalle Jokiniemi 提交于
The RX-51 uses the CSIb IO complex for camera operation. The board file is missing definition for the regulator supplying the CSIb complex, so this is added for better power management. Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 7月, 2011 2 次提交
-
-
由 Kalle Jokiniemi 提交于
The vaux2 (VCSI) regulator is left on by the bootloader in rx-51. Since there the product has shipped and there won't be any bootloader updates to fix this issue, we need to define all the regulators and declare full constraints for the regulator FW. This will allow the regulator FW to disable unused regulators. Also this helps in adding more fine grain regulator support for rx-51 in the future. Thanks for Mark Brown for pointing out the correct solution. Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ameya Palande 提交于
Platform support for lp5523 led chip Signed-off-by: NAmeya Palande <ameya.palande@nokia.com> Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 04 7月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
Allign the platform data names for twl4030 audio submodule: twl4030_audio_data: for the core MFD driver twl4030_codec_data: for ASoC codec driver twl4030_vibra_data: for the input/ForceFeedback driver To avoid breakage, change all depending drivers, files to use the new types. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-