iio:light:tsl2563 move out of staging

This driver is simple, uses the latest interfaces and contains few if
any controversial elements.  All of its interfaces have been in place
for a long time now.  Hence let's move it out of staging.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NPeter Meerwald <pmeerw@pmeerw.net>

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -42,7 +42,7 @@
 #include <media/si4713.h>
 #include <linux/leds-lp5523.h>
 
-#include <../drivers/staging/iio/light/tsl2563.h>
+#include <linux/platform_data/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)

drivers/iio/light/Kconfig

@@ -32,6 +32,16 @@ config SENSORS_LM3533
 	  changes. The ALS-control output values can be set per zone for the
 	  three current output channels.
 
+config SENSORS_TSL2563
+	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
+	depends on I2C
+	help
+	 If you say yes here you get support for the Taos TSL2560,
+	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tsl2563.
+
 config VCNL4000
 	tristate "VCNL4000 combined ALS and proximity sensor"
 	depends on I2C

drivers/iio/light/Makefile

@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
+obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o

drivers/staging/iio/light/tsl2563.c → drivers/iio/light/tsl2563.c

 /*
- * drivers/i2c/chips/tsl2563.c
+ * drivers/iio/light/tsl2563.c
  *
  * Copyright (C) 2008 Nokia Corporation
  *
@@ -38,7 +38,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/events.h>
-#include "tsl2563.h"
+#include <linux/platform_data/tsl2563.h>
 
 /* Use this many bits for fraction part. */
 #define ADC_FRAC_BITS		14

drivers/staging/iio/light/Kconfig

@@ -25,16 +25,6 @@ config SENSORS_ISL29028
 	 Proximity value via iio. The ISL29028 provides the concurrent sensing
 	 of ambient light and proximity.
 
-config SENSORS_TSL2563
-	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
-	depends on I2C
-	help
-	 If you say yes here you get support for the Taos TSL2560,
-	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
-
-	 This driver can also be built as a module.  If so, the module
-	 will be called tsl2563.
-
 config TSL2583
 	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
 	depends on I2C

drivers/staging/iio/light/Makefile

@@ -2,7 +2,6 @@
 # Makefile for industrial I/O Light sensors
 #
 
-obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o

drivers/staging/iio/light/tsl2563.h → include/linux/platform_data/tsl2563.h

@@ -6,4 +6,3 @@ struct tsl2563_platform_data {
 };
 
 #endif /* __LINUX_TSL2563_H */
-