Limit the number of imbalance messages to once per filesystem type instead of
once per system boot.  (it's actually slightly racy and could give you a
couple per fs, but this isn't a real issue)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Kill the 'update' argument of ima_path_check(), kill
dead code in ima.

Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one.  Which happens exactly in two places - alloc_file()
and __dentry_open().  Nothing else needs to do that at
all.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We currently have a lot of duplicated code around ima file counts.  Clean
that all up.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

iints are supposed to be allocated when an inode is allocated (during
security_inode_alloc())  But we have code which will attempt to allocate
an iint during measurement calls.  If we couldn't allocate the iint and we
cared, we should have died during security_inode_alloc().  Not make the
code more complex and less efficient.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.

- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.
Reported-by: NCiprian Docan <docan@eden.rutgers.edu>
Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: NJames Morris <jmorris@namei.org>

ima_counts_get() calls ima_iint_find_insert_get() which takes a reference
to the iint in question, but does not put that reference at the end of the
function.  This can lead to a nasty memory leak.  Easy enough to reproduce:

#include <sys/mman.h>
#include <stdio.h>

int main (void)
{
	int i;
	void *ptr;

	for (i=0; i < 100000; i++) {
		ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
			   MAP_SHARED|MAP_ANONYMOUS, -1, 0);
		if (ptr == MAP_FAILED)
			return 2;
		munmap(ptr, 4096);
	}

	return 0;
}
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.
Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Until we start appraising measurements, the ima_path_check()
return code should always be 0.

- Update the ima_path_check() return code comment
- Instead of the pr_info, audit the dentry_open failure
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

- Add support in ima_path_check() for integrity checking without
incrementing the counts. (Required for nfsd.)
- rename and export opencount_get to ima_counts_get
- replace ima_shm_check calls with ima_counts_get
- export ima_path_check
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

If IMA tried to measure a file which was larger than 4G dentry_open would fail
with -EOVERFLOW since IMA wasn't passing O_LARGEFILE.  This patch passes
O_LARGEFILE to all IMA opens to avoid this problem.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently IMA does not handle failures from dentry_open().  This means that we
leave a pointer set to ERR_PTR(errno) and then try to use it just a few lines
later in fput().  Oops.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Proper invocation of the current credentials is to use current_cred() not
current->cred.  This patches makes IMA use the new method.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Remove integrity audit messages from __setup()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The number of calls to ima_path_check()/ima_file_free()
should be balanced.  An extra call to fput(), indicates
the file could have been accessed without first being
measured.

Although f_count is incremented/decremented in places other
than fget/fput, like fget_light/fput_light and get_file, the
current task must already hold a file refcnt.  The call to
__fput() is delayed until the refcnt becomes 0, resulting
in ima_file_free() flagging any changes.

- add hook to increment opencount for IPC shared memory(SYSV),
  shmat files, and /dev/zero
- moved NULL iint test in opencount_get()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Make the measurement lists available through securityfs.
- removed test for NULL return code from securityfs_create_file/dir
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

IMA provides hardware (TPM) based measurement and attestation for
file measurements. As the Trusted Computing (TPM) model requires,
IMA measures all files before they are accessed in any way (on the
integrity_bprm_check, integrity_path_check and integrity_file_mmap
hooks), and commits the measurements to the TPM. Once added to the
TPM, measurements can not be removed.

In addition, IMA maintains a list of these file measurements, which
can be used to validate the aggregate value stored in the TPM.  The
TPM can sign these measurements, and thus the system can prove, to
itself and to a third party, the system's integrity in a way that
cannot be circumvented by malicious or compromised software.

- alloc ima_template_entry before calling ima_store_template()
- log ima_add_boot_aggregate() failure
- removed unused IMA_TEMPLATE_NAME_LEN
- replaced hard coded string length with #define name
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>