Limit the number of imbalance messages to once per filesystem type instead of
once per system boot.  (it's actually slightly racy and could give you a
couple per fs, but this isn't a real issue)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Kill the 'update' argument of ima_path_check(), kill
dead code in ima.

Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one.  Which happens exactly in two places - alloc_file()
and __dentry_open().  Nothing else needs to do that at
all.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ima_inode_free() has some funky #define just to confuse the crap out of me.

void ima_iint_delete(struct inode *inode)

and then things actually call ima_inode_free() and nothing calls
ima_iint_delete().
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We currently have a lot of duplicated code around ima file counts.  Clean
that all up.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

iints are supposed to be allocated when an inode is allocated (during
security_inode_alloc())  But we have code which will attempt to allocate
an iint during measurement calls.  If we couldn't allocate the iint and we
cared, we should have died during security_inode_alloc().  Not make the
code more complex and less efficient.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ima_inode_alloc returns 0 and 1, but the LSM hooks expects an errno.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

While running fsstress tests on the NFSv4 mounted ext3 and ext4
filesystem, the following call trace was generated on the nfs
server machine.

Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a
potential deadlock.

     =================================
    [ INFO: inconsistent lock state ]
    2.6.31-31.el6.x86_64 #1
    ---------------------------------
    inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
    kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes:
     (jbd2_handle){+.+.?.}, at: [<ffffffff811edd5e>] jbd2_journal_start+0xfe/0x13f
    {RECLAIM_FS-ON-W} state was registered at:
      [<ffffffff81091e40>] mark_held_locks+0x65/0x99
      [<ffffffff81091f31>] lockdep_trace_alloc+0xbd/0xf5
      [<ffffffff81126fdd>] kmem_cache_alloc+0x40/0x185
      [<ffffffff812344d7>] ima_iint_insert+0x3d/0xf1
      [<ffffffff812345b0>] ima_inode_alloc+0x25/0x44
      [<ffffffff811484ac>] inode_init_always+0xec/0x271
      [<ffffffff81148682>] alloc_inode+0x51/0xa1
      [<ffffffff81148700>] new_inode+0x2e/0x94
      [<ffffffff811b2f08>] ext4_new_inode+0xb8/0xdc9
      [<ffffffff811be611>] ext4_create+0xcf/0x175
      [<ffffffff8113e2cd>] vfs_create+0x82/0xb8
      [<ffffffff8113f337>] do_filp_open+0x32c/0x9ee
      [<ffffffff811309b9>] do_sys_open+0x6c/0x12c
      [<ffffffff81130adc>] sys_open+0x2e/0x44
      [<ffffffff81011e42>] system_call_fastpath+0x16/0x1b
      [<ffffffffffffffff>] 0xffffffffffffffff
    irq event stamp: 90371
    hardirqs last  enabled at (90371): [<ffffffff8112708d>]
    kmem_cache_alloc+0xf0/0x185
    hardirqs last disabled at (90370): [<ffffffff81127026>]
    kmem_cache_alloc+0x89/0x185
    softirqs last  enabled at (89492): [<ffffffff81068ecf>]
    __do_softirq+0x1bf/0x1eb
    softirqs last disabled at (89477): [<ffffffff8101312c>] call_softirq+0x1c/0x30

    other info that might help us debug this:
    2 locks held by kswapd2/75:
     #0:  (shrinker_rwsem){++++..}, at: [<ffffffff810f98ba>] shrink_slab+0x44/0x177
     #1:  (&type->s_umount_key#25){++++..}, at: [<ffffffff811450ba>]
Reported-by: NMuni P. Beerakam <mbeeraka@in.ibm.com>
Reported-by: NAmit K. Arora <amitarora@in.ibm.com>
Cc: stable@kernel.org
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Based on discussions on LKML and LSM, where there are consecutive
security_ and ima_ calls in the vfs layer, move the ima_ calls to
the existing security_ hooks.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

[akpm@linux-foundation.org: fix KVM]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.

- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.
Reported-by: NCiprian Docan <docan@eden.rutgers.edu>
Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: NJames Morris <jmorris@namei.org>

ima_counts_get() calls ima_iint_find_insert_get() which takes a reference
to the iint in question, but does not put that reference at the end of the
function.  This can lead to a nasty memory leak.  Easy enough to reproduce:

#include <sys/mman.h>
#include <stdio.h>

int main (void)
{
	int i;
	void *ptr;

	for (i=0; i < 100000; i++) {
		ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
			   MAP_SHARED|MAP_ANONYMOUS, -1, 0);
		if (ptr == MAP_FAILED)
			return 2;
		munmap(ptr, 4096);
	}

	return 0;
}
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Hashing files larger than INT_MAX causes process to loop.
Dependent on redefining kernel_read() offset type to loff_t.

(http://bugzilla.kernel.org/show_bug.cgi?id=13909)

Cc: stable@kernel.org
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.
Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Audit the file name, not the template name.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Until we start appraising measurements, the ima_path_check()
return code should always be 0.

- Update the ima_path_check() return code comment
- Instead of the pr_info, audit the dentry_open failure
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

- Add support in ima_path_check() for integrity checking without
incrementing the counts. (Required for nfsd.)
- rename and export opencount_get to ima_counts_get
- replace ima_shm_check calls with ima_counts_get
- export ima_path_check
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

A number of IMA functions only used during init are not marked with __init.
Add those notations so they are freed automatically.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The IMA TCB policy is dangerous.  A normal use can use all of a system's
memory (which cannot be freed) simply by building and running lots of
executables.  The TCB policy is also nearly useless because logging in as root
often causes a policy violation when dealing with utmp, thus rendering the
measurements meaningless.

There is no good fix for this in the kernel.  A full TCB policy would need to
be loaded in userspace using LSM rule matching to get both a protected and
useful system.  But, if too little is measured before userspace can load a real
policy one again ends up with a meaningless set of measurements.  One option
would be to put the policy load inside the initrd in order to get it early
enough in the boot sequence to be useful, but this runs into trouble with the
LSM.  For IMA to measure the LSM policy and the LSM policy loading mechanism
it needs rules to do so, but we already talked about problems with defaulting
to such broad rules....

IMA also depends on the files being measured to be on an FS which implements
and supports i_version.  Since the only FS with this support (ext4) doesn't
even use it by default it seems silly to have any IMA rules by default.

This should reduce the performance overhead of IMA to near 0 while still
letting users who choose to configure their machine as such to inclue the
ima_tcb kernel paramenter and get measurements during boot before they can
load a customized, reasonable policy in userspace.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The selinuxfs superblock magic is used inside the IMA code, but is being
defined in two places and could someday get out of sync.  This patch moves the
declaration into magic.h so it is only done once.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The IMA default policy measures every single file opened by root.  This is
terrible for most users.  Consider a system (like mine) with virtual machine
images.  When those images are touched (which happens at boot for me) those
images are measured.  This is just way too much for the default case.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The IMA policy file does not implement read.  Trying to just open/read/close
the file will load a blank policy and you cannot then change the policy
without a reboot.  This removes the read permission from the file so one must
at least be attempting to write...
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

If IMA tried to measure a file which was larger than 4G dentry_open would fail
with -EOVERFLOW since IMA wasn't passing O_LARGEFILE.  This patch passes
O_LARGEFILE to all IMA opens to avoid this problem.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently IMA does not handle failures from dentry_open().  This means that we
leave a pointer set to ERR_PTR(errno) and then try to use it just a few lines
later in fput().  Oops.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Proper invocation of the current credentials is to use current_cred() not
current->cred.  This patches makes IMA use the new method.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Remove integrity audit messages from __setup()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Based on a request from Eric Paris to simplify parsing, replace
audit_log_format statements containing "%s" with audit_log_string().
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

An audit subsystem change replaced AUDIT_EQUAL with Audit_equal.
Update calls to security_filter_rule_init()/match() to reflect
the change.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Use previously introduced list_entry_rcu instead of an open-coded
list_entry + rcu_dereference combination.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: dipankar@in.ibm.com
LKML-Reference: <20090414181715.GA3634@psychotron.englab.brq.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Based on Andrew Morton's comments:
- add missing locks around radix_tree_lookup in ima_iint_insert()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Based on Alexander Beregalov's post http://lkml.org/lkml/2009/2/19/198

- replaced sg_set_buf() with sg_init_one()

 kernel BUG at include/linux/scatterlist.h:65!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 last sysfs file:
 CPU 2
 Modules linked in:
 Pid: 1, comm: swapper Not tainted 2.6.29-rc5-next-20090219 #5 PowerEdge 1950
 RIP: 0010:[<ffffffff8045ec70>]  [<ffffffff8045ec70>] ima_calc_hash+0xc0/0x160
 RSP: 0018:ffff88007f46bc40  EFLAGS: 00010286
 RAX: ffffe200032c45e8 RBX: 00000000fffffff4 RCX: 0000000087654321
 RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff88007cf71048
 RBP: ffff88007f46bcd0 R08: 0000000000000000 R09: 0000000000000163
 R10: ffff88007f4707a8 R11: 0000000000000000 R12: ffff88007cf71048
 R13: 0000000000001000 R14: 0000000000000000 R15: 0000000000009d98
 FS:  0000000000000000(0000) GS:ffff8800051ac000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Tested-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

IMA_LSM_RULES requires AUDIT.  This is automatic if SECURITY_SELINUX=y
but not when SECURITY_SMACK=y (and SECURITY_SELINUX=n), so make the
dependency explicit.  This fixes the following build error:

security/integrity/ima/ima_policy.c:111:error: implicit declaration of function 'security_audit_rule_match'
security/integrity/ima/ima_policy.c:230:error: implicit declaration of function 'security_audit_rule_init'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Based on discussions on linux-audit, as per Steve Grubb's request
http://lkml.org/lkml/2009/2/6/269, the following changes were made:
- forced audit result to be either 0 or 1.
- made template names const
- Added new stand-alone message type: AUDIT_INTEGRITY_RULE
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix ima_delete_rules() definition so sparse doesn't complain.
Signed-off-by: NJames Morris <jmorris@namei.org>

The number of calls to ima_path_check()/ima_file_free()
should be balanced.  An extra call to fput(), indicates
the file could have been accessed without first being
measured.

Although f_count is incremented/decremented in places other
than fget/fput, like fget_light/fput_light and get_file, the
current task must already hold a file refcnt.  The call to
__fput() is delayed until the refcnt becomes 0, resulting
in ima_file_free() flagging any changes.

- add hook to increment opencount for IPC shared memory(SYSV),
  shmat files, and /dev/zero
- moved NULL iint test in opencount_get()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Sequentialize access to the policy file
- permit multiple attempts to replace default policy with a valid policy
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Support for a user loadable policy through securityfs
with support for LSM specific policy data.
- free invalid rule in ima_parse_add_rule()
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Make the measurement lists available through securityfs.
- removed test for NULL return code from securityfs_create_file/dir
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

IMA provides hardware (TPM) based measurement and attestation for
file measurements. As the Trusted Computing (TPM) model requires,
IMA measures all files before they are accessed in any way (on the
integrity_bprm_check, integrity_path_check and integrity_file_mmap
hooks), and commits the measurements to the TPM. Once added to the
TPM, measurements can not be removed.

In addition, IMA maintains a list of these file measurements, which
can be used to validate the aggregate value stored in the TPM.  The
TPM can sign these measurements, and thus the system can prove, to
itself and to a third party, the system's integrity in a way that
cannot be circumvented by malicious or compromised software.

- alloc ima_template_entry before calling ima_store_template()
- log ima_add_boot_aggregate() failure
- removed unused IMA_TEMPLATE_NAME_LEN
- replaced hard coded string length with #define name
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>