This allows for proper console unregistration via the VT layer, and updates
the FB layer to use it.  This makes debugging new console drivers much easier,
since you can properly clean them up before unloading.

[adaplas]
unregister_framebuffer() is typically called as part of the driver's
module_exit(). Doing so otherwise will freeze the machine as the VT layer is
holding reference counts on fbcon, and fbcon on the driver.  With this change,
it allows unregister_framebuffer() to be called safely anywhere as needed.

Additions from the original:  If multiple drivers are used by fbcon, and if
one of them unregisters, a driver will take over the consoles vacated by the
outgoing one (via set_con2fb_map).   Once only the outgoing driver remains,
then fbcon will unbind from the VT layer (if CONFIG_HW_CONSOLE_UNBINDING is
set to y).

It is important that these drivers implement fb_open() and fb_release()
just to ensure that no other process is using the driver. Likewise, these
drivers _must_ check the return value of unregister_framebuffer().

[akpm@linux-foundation.org: make fbcon_unbind() stub inline]
Signed-off-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use set_con2fb_map() to select the primary display driver instead of using
unbind_con_driver() and bind_con_driver().  Using the former is much simpler
and safer than the current one.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_con2fb_map() has regressed for some time.  Using fbcon=map:01, for
example, works only if there is only 1 working framebuffer. Trying to do a
set_con2fb_map() on a non-allocated vc will freeze the system.

- ensure that succeeding drivers after the first gets mapped to the console
- remove fbcon_preset_display() and modify fbcon_set_display() to include the
  former's functionality
- ensure that binding and unbinding succeeds if multiple drivers are mapped to
  the console
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes trailing spaces and tabs and spaces before tabs.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add proper support for the Geforce 7600 (device id 0x039x).  This also sync's
nvidiafb with the latest Xorg nv driver.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add PCI ids for the Radeon Xpress 200M (RS485).
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow fbcon to select the primary display adapter using the
fb_is_primary_device() arch-specific helper.  If a a primary adapter is
detected, fbcon will unbind the old adapter from the VT layer, then rebind
using the new adapter.  This requires that bind_/unbind_con_driver() be made
public.

Because this feature may produce unexpected behavior (from the user's POV),
this must be explicitly enabled in Kconfig.

[akpm@linux-foundation.org: export unbind_con_driver]
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add function helper, fb_is_primary_device().  Given struct fb_info, it will
return a nonzero value if the device is the primary display.

Currently, only the i386 is supported where the function checks for the
IORESOURCE_ROM_SHADOW flag.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move arch-specific bits of fb_mmap() to their respective subdirectories

[bob.picco@hp.com: efi_range_is_wc is referenced but not declared]
[bunk@stusta.de: fix include/asm-m68k/fb.h]
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Port fbcon.c to use struct device from using struct class_device
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add sysfs attribute to enable or disable cursor blinking.  This will also
disable cursor blinking if the VT layer's softcursor is active.  These changes
are required to enable some machines to enter low-power states properly.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SCROLL_MOVE method has been optimized such that it is significantly faster
than SCROLL_REDRAW.  Adjust flags to indicate that blitting is preferred over
rendering.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch replaces the current SCROLL_MOVE method with smarter method using
the same logic as the SCROLL_REDRAW method.  This brings these two methods
much closer in performance and benefits all framebuffers which uses the
SCROLL_MOVE method.

[adaplas]
- remove unnecessary char attribute checking
- whitespace cleanups and 80-column line fixes
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move brdp->iosize assignment in stli_initecp up a few lines to stop the
driver from requesting an I/O region of length 0.

Remove spin_lock_irqsave/spin_unlock_irqrestore from __stli_sendcmd as
all users of that function take the lock already.
Signed-off-by: NIngo Korb <ml@akana.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

stallion, remove user class report request
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kconfig, mxser_new: remove experimental comment
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vt, use ARRAY_SIZE
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vt, use kzalloc
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

riscom8, eliminate busy loop
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

use msleep instead, because not in atomic

Cc: Roger Wolff <R.E.Wolff@BitWizard.nl>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

blah, moxa delays 250+ ms in busy waiting, use msleep instead.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

irq is int, base is unsigned long
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't spin processor when not needed (use sleep instead of delay).  Don't
release the lock when needed in next iteration -- this actually fixes a bug --
missing braces
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, fix sparse warning
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, add firmware loading
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains the scheduled removal of options depending on
OSS_OBSOLETE.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

trident_write_voice_regs() was getting called with the card spinlock held in
only some cases.  Fix it.

Explanation: we allocate a new virtual channel in open, and then we frob some
hardware registers (in write_voice_regs) for that channel.  But the hardware
registers are shared with other channels, which may be trying to frob the some
registers (albeit for another channel) via ioctl(SNDCTL_DSP_SPEED).

Fixed bugzilla.kernel.org bug #8172 (http://bugme.osdl.org/show_bug.cgi?id=8172)
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Cc: <tammy000@gmail.com>
Cc: <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update csb337 board specific init to support "new style" rtc-ds1307 code.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert the rtc-ds1307 driver into a "new style" driver.

Also improve probe() checks:  be more correct about switching out of
AM/PM mode, and issue a (debug) diagnostic when failing due to bogus
register values.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we find a ds1337 or ds1339 with the oscillator powered off, turn it
on.  If the oscillator fault flag was set, clear it and warn that the clock
needs to be set.

David Brownell: Bugfixes; provide corresponding update for ds1338, and the
core of the fix for ds1340.  Use a common warning message ("SET TIME!")
whenever the clock needs to be set after oscillator fault (or oscillator
enable, if fault is not a separate status).
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RTC driver for Dallas/Maxim DS126 chips used in SNI RM200/RM400

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: x86_64 build fix]
[akpm@linux-foundation.org: The acpi guys changed the bin_attribute code]
Signed-off-by: NMark Zhan <rongkai.zhan@windriver.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a watchdog driver interface to rtc-m41t80 driver.  This is derived from
works by Alexander Bigga <ab@mycable.de>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NAlexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a new-style i2c driver for ST M41T80 series RTC chip, derived from
works by Alexander Bigga <ab@mycable.de> who wrote the original
rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver.

This driver supports M41T8[0-4] and M41ST8[457].  The old m41t00 driver
supports M41T00, M41T81 and M41T85(M41ST85).  While the M41T00 chip is now
supported by rtc-ds1307 driver, this driver does not include support for
the chip.

[akpm@linux-foundation.org: remove bogus `static']
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NAlexander Bigga <ab@mycable.de>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Minor fix to the Kconfig for RTCs: don't display section headers for I2C or
SPI unless they're configured.  And depend on SPI_MASTER; having slave
support wouldn't help.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RTC class is mature enough.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>