提交 cf3a386c 编写于 作者: A Adrian Bunk 提交者: Linus Torvalds

remove options depending on OSS_OBSOLETE

This patch contains the scheduled removal of options depending on
OSS_OBSOLETE.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 2e32725c
......@@ -5,35 +5,6 @@
#
# Prompt user for primary drivers.
config OSS_OBSOLETE
bool "Obsolete OSS drivers"
depends on SOUND_PRIME
help
This option enables support for obsolete OSS drivers that
are scheduled for removal in the near future.
Please contact Adrian Bunk <bunk@stusta.de> if you had to
say Y here because your hardware is not properly supported
by ALSA.
If unsure, say N.
config SOUND_BT878
tristate "BT878 audio dma"
depends on SOUND_PRIME && PCI && OSS_OBSOLETE
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
Function 0 does the video stuff (bt848 compatible), function 1 does
the same for audio data. This is a driver for the audio part of
the chip. If you say 'Y' here you get a oss-compatible dsp device
where you can record from. If you want just watch TV you probably
don't need this driver as most TV cards handle sound with a short
cable from the TV card to your sound card's line-in.
To compile this driver as a module, choose M here: the module will
be called btaudio.
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
......@@ -44,13 +15,6 @@ config SOUND_BCM_CS4297A
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI && OSS_OBSOLETE
help
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
......@@ -346,26 +310,6 @@ config MSND_FIFOSIZE
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
depends on SOUND_PRIME && PCI && OSS_OBSOLETE && VIRT_TO_BUS
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
DO NOT select Sound Blaster or Adlib with this driver, unless
you have a Sound Blaster or Adlib card in addition to your VIA
audio chip.
config MIDI_VIA82CXXX
bool "VIA 82C686 MIDI"
depends on SOUND_VIA82CXXX && ISA_DMA_API
help
Answer Y to use the MIDI interface of the Via686. You may need to
enable this in the BIOS before it will work. This is for connection
to external MIDI hardware, and is not required for software playback
of MIDI files.
config SOUND_OSS
tristate "OSS sound modules"
depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
......@@ -400,20 +344,6 @@ config SOUND_DMAP
Say Y unless you have 16MB or more RAM or a PCI sound card.
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
depends on SOUND_OSS && OSS_OBSOLETE
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
If you compile the driver into the kernel, you have to add
"cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
command line.
See <file:Documentation/sound/oss/CS4232> for more information on
configuring this card.
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
depends on SOUND_OSS
......@@ -720,13 +650,6 @@ config SOUND_WAVEARTIST
Say Y here to include support for the Rockwell WaveArtist sound
system. This driver is mainly for the NetWinder.
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
depends on SOUND_PRIME && I2C && VIDEO_V4L1 && OSS_OBSOLETE
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册