- 20 3月, 2016 3 次提交
-
-
由 Matti Gottlieb 提交于
Paging contains 3 sections in the fw. The first for the paging separator, The second for the CSS block, the third with the paging data. Currently if the driver finds the paging separator, and there is only section left (CSS), once reading the CSS section, the driver will attempt to read the paging data and will go out of the arrays bounds. Make sure that the FW image contains the right amount of sections for paging. Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Matti Gottlieb 提交于
Currently the driver has 2 buffers for paging: 1. paging db - this contains all of the pages that were in the FW image, that the driver stores for the FW. This is allocated for each block separately (not contiguous). 2. download buffer - we need to provide this empty buffer for the iwl_sdio_load_fw_chunk function to copy the requested pages to the shared memory. This is one big buffer of contiguous memory whose size is the size of all the blocks that the fw paging section can contain. This download buffer size is too big, and causes the allocation to fail sometimes. Since the driver allocates memory for each block separately, it is not possible for the FW to request all of the pages in one request (the FW gives an address and size, so blocks need to be contiguous for this to happen), therefore the FW is limited to request only one block. Decrease the size of the paging download buffer to be the size of a paging block. Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Sara Sharon 提交于
Currently when stop flow is performed, there might be transport TX RTPM references that are not freed in case we unmap a queue that still has packets not reclaimed. Fix that. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 18 3月, 2016 1 次提交
-
-
由 Kees Cook 提交于
Some callers of strtobool() were passing a pointer to unterminated strings. In preparation of adding multi-character processing to kstrtobool(), update the callers to not pass single-character pointers, and switch to using the new kstrtobool_from_user() helper where possible. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Steve French <sfrench@samba.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Kees Cook <keescook@chromium.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2016 2 次提交
-
-
由 Arnd Bergmann 提交于
A cleanup patch in linux-3.18 moved around some code in the ath9k driver and left some code to be indented in a misleading way, made worse by the addition of some new code for p2p mode, as discovered by a new gcc-6 warning: drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab': drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] hw->wiphy->iface_combinations = if_comb; ^~ drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not if (ath9k_is_chanctx_enabled()) ^~ The code is in fact correct, but the indentation is not, so I'm reformatting it as it should have been after the original cleanup. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 499afacc ("ath9k: Isolate ath9k_use_chanctx module parameter") Fixes: eb61f9f6 ("ath9k: advertise p2p dev support when chanctx") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 940cd2c1 ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2016 34 次提交
-
-
由 Jes Sorensen 提交于
To reduce the patch volume, temporariliy disable 8192eu device init. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
8723b needs more action, so implement support for device specific reset functions. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Only print a warning if the FIFO flush fails, as opposed to printing the status unconditionally. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This should help when reloading the driver for 8723bu devices Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Implment 8723bu specific device power down, and make power_off() a fileops function. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Powering up the 8723bu RF should probably be matched by the ability to power it down again. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Use the bit define rather than hard code the value for REG_PWR_DATA bits. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
rtl8723bu_init_bt() is effectively the function enabling RF, so name it appropriately. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This removes an superfluous semicolon. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
rtl8xxxu_rx_parse_phystats() only needs the RX rate to determine whether to handle the stats as CCK or not. Parsing in the rate rather than the rx descriptor elimantes the need to handle multiple rx descriptor formats in the function. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Handle RA_REPORTS events for 8723bu to not have them show up as unhandled. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Dump the contents of unhandled C2H events. We should be handling all expected events, so this is debugging help in case an unexpected event happens. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Implement support for nextgen devices reporting connectition to the firmware. The H2C API for reporting connection to the firmware is different between the two device generations. Use the fileops structure to determine which one to call. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Support for setting bandwidth and VHT parameters is still missing Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Define H2C command structure for setting the rate mask. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
C2H events are delivered as RX packets on 8723bu/8192eu. When receiving a C2H event, do not parse the rest of the RX descriptor as the info isn't valid. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Further correct the handling of 40 byte TX descriptors. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Correct the setting of TX RTS for 8723a generation chips. In addition update documentation to match that this is part of data word 4, note data word 5. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
TX data words 4 and 5 differ significantly between 32 byte and 40 byte descriptors. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
SEQ changed location in the 40 byte TX descriptor. Set it correctly. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Fixup victim of the relocated bits for AGG_ENABLE/AGG_BREAK in the 40 byte TX descriptor Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Add additional bit definitions for 40 byte TX descriptors, and rename bits for 32 byte descriptors that are located differently in the 40 byte descriptor format. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This adds documentation for some additional bits in TX descriptor word 0. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Reduce the log level in rtl8723bu_handle_c2h() Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Note the descriptor checksum is still only calculated over the initial 32 bytes of the descriptor, ignoring the last 8 bytes of the descriptor. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Newer generation chips use a 40 byte TX descriptor, compared to the 32 byte descriptor used on older chips. This adds the definition for the 40 byte descriptor. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Older chips use RF register 0x24 to set the thermal meter. Newer chips use register 0x42. This change makes sure to set the correct thermal meter register depending on the chip. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This adds the missing support for setting MCS TX power rates on 8723bu. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This implements support for setting TX power for CCK and OFDM rates on 8723bu. MCS rates is still pending. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This should (hopefully) parse the power indices correctly for the 8723bu. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Newer generation chips have more channels groups. In order to carry the larger arrays in common structures, bump the array sizes to match. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Some newer chips have more channel groups in their efuse parameter tables, so use the size of the source, rather than the destination when copying them out. This avoids copying garbage when increasing the common array sizes. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
The 8723b series is significantly different from the older generation in this sense. So far the 8723b version doesn't do anything useful. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
Correct TX power definitions in rtl8723bu_efuse Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-