Paging contains 3 sections in the fw. The first for the paging separator,
The second for the CSS block, the third with the paging data.

Currently if the driver finds the paging separator, and there is only
section left (CSS), once reading the CSS section, the driver will
attempt to read the paging data and will go out of the arrays bounds.

Make sure that the FW image contains the right amount of sections for
paging.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Currently the driver has 2 buffers for paging:
1. paging db - this contains all of the pages that were in the FW
image, that the driver stores for the FW. This is allocated for each
block separately (not contiguous).
2. download buffer - we need to provide this empty buffer for the
iwl_sdio_load_fw_chunk function to copy the requested pages to the shared
memory. This is one big buffer of contiguous memory whose size is the
size of all the blocks that the fw paging section can contain.

This download buffer size is too big, and causes the allocation to fail
sometimes. Since the driver allocates memory for each block separately,
it is not possible for the FW to request all of the pages in one request
(the FW gives an address and size, so blocks need to be contiguous for
this to happen), therefore the FW is limited to request only one block.

Decrease the size of the paging download buffer to be the size of a
paging block.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Currently when stop flow is performed, there might be transport TX RTPM
references that are not freed in case we unmap a queue that still has
packets not reclaimed. Fix that.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

Pull cgroup updates from Tejun Heo:
 "cgroup changes for v4.6-rc1.  No userland visible behavior changes in
  this pull request.  I'll send out a separate pull request for the
  addition of cgroup namespace support.

   - The biggest change is the revamping of cgroup core task migration
     and controller handling logic.  There are quite a few places where
     controllers and tasks are manipulated.  Previously, many of those
     places implemented custom operations for each specific use case
     assuming specific starting conditions.  While this worked, it makes
     the code fragile and difficult to follow.

     The bulk of this pull request restructures these operations so that
     most related operations are performed through common helpers which
     implement recursive (subtrees are always processed consistently)
     and idempotent (they make cgroup hierarchy converge to the target
     state rather than performing operations assuming specific starting
     conditions).  This makes the code a lot easier to understand,
     verify and extend.

   - Implicit controller support is added.  This is primarily for using
     perf_event on the v2 hierarchy so that perf can match cgroup v2
     path without requiring the user to do anything special.  The kernel
     portion of perf_event changes is acked but userland changes are
     still pending review.

   - cgroup_no_v1= boot parameter added to ease testing cgroup v2 in
     certain environments.

   - There is a regression introduced during v4.4 devel cycle where
     attempts to migrate zombie tasks can mess up internal object
     management.  This was fixed earlier this week and included in this
     pull request w/ stable cc'd.

   - Misc non-critical fixes and improvements"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (44 commits)
  cgroup: avoid false positive gcc-6 warning
  cgroup: ignore css_sets associated with dead cgroups during migration
  Documentation: cgroup v2: Trivial heading correction.
  cgroup: implement cgroup_subsys->implicit_on_dfl
  cgroup: use css_set->mg_dst_cgrp for the migration target cgroup
  cgroup: make cgroup[_taskset]_migrate() take cgroup_root instead of cgroup
  cgroup: move migration destination verification out of cgroup_migrate_prepare_dst()
  cgroup: fix incorrect destination cgroup in cgroup_update_dfl_csses()
  cgroup: Trivial correction to reflect controller.
  cgroup: remove stale item in cgroup-v1 document INDEX file.
  cgroup: update css iteration in cgroup_update_dfl_csses()
  cgroup: allocate 2x cgrp_cset_links when setting up a new root
  cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask
  cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends
  cgroup: use cgroup_apply_enable_control() in cgroup creation path
  cgroup: combine cgroup_mutex locking and offline css draining
  cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()
  cgroup: introduce cgroup_{save|propagate|restore}_control()
  cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive
  cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write()
  ...

bond_get_stats() can be called from rtnetlink (with RTNL held)
or from /proc/net/dev seq handler (with RCU held)

The logic added in commit 5f0c5f73 ("bonding: make global bonding
stats more reliable") kind of assumed only one cpu could run there.

If multiple threads are reading /proc/net/dev, stats can be really
messed up after a while.

A second problem is that some fields are 32bit, so we need to properly
handle the wrap around problem.

Given that RTNL is not always held, we need to use
bond_for_each_slave_rcu().

Fixes: 5f0c5f73 ("bonding: make global bonding stats more reliable")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When un-mapping skb->data in __bcmgenet_tx_reclaim(),
we must use the length that was used in original dma_map_single(),
instead of skb->len that might be bigger (includes the frags)

We simply can store skb_len into tx_cb_ptr->dma_len and use it
at unmap time.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 85743f1e ("net/mlx4_core: Set UAR page size to 4KB regardless
of system page size") introduced dependency where old VF drivers without
this fix fail to load if the PF driver runs with this commit.

To resolve this add a module parameter which disables that functionality
by default.  If both the PF and VFs are running with a driver with that
commit the administrator may set the module param to true.

The module parameter is called enable_4k_uar.

Fixes: 85743f1e ('net/mlx4_core: Set UAR page size to 4KB ...')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull libata updates from Tejun Heo:

 - ahci grew runtime power management support so that the controller can
   be turned off if no devices are attached.

 - sata_via isn't dead yet.  It got hotplug support and more refined
   workaround for certain WD drives.

 - Misc cleanups.  There's a merge from for-4.5-fixes to avoid confusing
   conflicts in ahci PCI ID table.

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_xgene: dereferencing uninitialized pointer in probe
  AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
  ata: sata_rcar: Use ARCH_RENESAS
  sata_via: Implement hotplug for VT6421
  sata_via: Apply WD workaround only when needed on VT6421
  ahci: Add runtime PM support for the host controller
  ahci: Add functions to manage runtime PM of AHCI ports
  ahci: Convert driver to use modern PM hooks
  ahci: Cache host controller version
  scsi: Drop runtime PM usage count after host is added
  scsi: Set request queue runtime PM status back to active on resume
  block: Add blk_set_runtime_active()
  ata: ahci_mvebu: add support for Armada 3700 variant
  libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  libata: support AHCI on OCTEON platform

Pull workqueue updates from Tejun Heo:
 "Three trivial workqueue changes"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for work_on_cpu()
  sched/core: Get rid of 'cpu' argument in wq_worker_sleeping()
  workqueue: Replace usage of init_name with dev_set_name()

Drop two extra occurrences of "on" in option title and help text.

Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add lan78xx_get_stats64 of ndo_get_stats64 to report
all statistics counters including errors from HW statistics.

Read from HW when auto suspend is disabled, use saved counter when
auto suspend is enabled because periodic call to ndo_get_stats64
prevents USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update to handle statistics counter rollover.
Check statistics counter periodically and compensate it when
counter value rolls over at max (20 or 32bits).

Simple mechanism adjusts monitoring timer to allow USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...

Sowmini Varadhan says:

====================
RDS: TCP: tunable socket buffer parameters

Patch 1 uses sysctl to create tunable socket buffer size parameters.

Patch 2 removes an unuused constant.

v2: use sysctl
v3: review comments from Santosh Shilimkar, Eric Dumazet
v4: review comments from Hannes Sowa
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.

The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.

These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.

The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zhang Shengju says:

====================
remove duplicate set of flag IFF_MULTICAST

This patch series remove duplicate set of flag IFF_MULTICAST.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for this merge window.  It sits
  on top of for-4.6/core, that was just sent out.

  This contains:

   - A set of fixes for lightnvm.  One from Alan, fixing an overflow,
     and the rest from the usual suspects, Javier and Matias.

   - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
     for correct usage of the signed 64-bit divider.

   - A set of bug fixes for the Micron mtip32xx, from Asai.

   - A fix for the brd discard handling from Bart.

   - Update the maintainers entry for cciss, since that hardware has
     transferred ownership.

   - Three bug fixes for bcache from Eric Wheeler.

   - Set of fixes for xen-blk{back,front} from Jan and Konrad.

   - Removal of the cpqarray driver.  It has been disabled in Kconfig
     since 2013, and we were initially scheduled to remove it in 3.15.

   - Various updates and fixes for NVMe, with the most important being:

        - Removal of the per-device NVMe thread, replacing that with a
          watchdog timer instead. From Christoph.

        - Exposing the namespace WWID through sysfs, from Keith.

        - Set of cleanups from Ming Lin.

        - Logging the controller device name instead of the underlying
          PCI device name, from Sagi.

        - And a bunch of fixes and optimizations from the usual suspects
          in this area"

* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
  NVMe: Expose ns wwid through single sysfs entry
  drivers:block: cpqarray clean up
  brd: Fix discard request processing
  cpqarray: remove it from the kernel
  cciss: update MAINTAINERS
  NVMe: Remove unused sq_head read in completion path
  bcache: fix cache_set_flush() NULL pointer dereference on OOM
  bcache: cleaned up error handling around register_cache()
  bcache: fix race of writeback thread starting before complete initialization
  NVMe: Create discard zero quirk white list
  nbd: use correct div_s64 helper
  mtip32xx: remove unneeded variable in mtip_cmd_timeout()
  lightnvm: generalize rrpc ppa calculations
  lightnvm: remove struct nvm_dev->total_blocks
  lightnvm: rename ->nr_pages to ->nr_sects
  lightnvm: update closed list outside of intr context
  xen/blback: Fit the important information of the thread in 17 characters
  lightnvm: fold get bb tbl when using dual/quad plane mode
  lightnvm: fix up nonsensical configure overrun checking
  xen-blkback: advertise indirect segment support earlier
  ...

Pull core block updates from Jens Axboe:
 "Here are the core block changes for this merge window.  Not a lot of
  exciting stuff going on in this round, most of the changes have been
  on the driver side of things.  That pull request is coming next.  This
  pull request contains:

   - A set of fixes for chained bio handling from Christoph.

   - A tag bounds check for blk-mq from Hannes, ensuring that we don't
     do something stupid if a device reports an invalid tag value.

   - A set of fixes/updates for the CFQ IO scheduler from Jan Kara.

   - A set of blk-mq fixes from Keith, adding support for dynamic
     hardware queues, and fixing init of max_dev_sectors for stacking
     devices.

   - A fix for the dynamic hw context from Ming.

   - Enabling of cgroup writeback support on a block device, from
     Shaohua"

* 'for-4.6/core' of git://git.kernel.dk/linux-block:
  blk-mq: add bounds check on tag-to-rq conversion
  block: bio_remaining_done() isn't unlikely
  block: cleanup bio_endio
  block: factor out chained bio completion
  block: don't unecessarily clobber bi_error for chained bios
  block-dev: enable writeback cgroup support
  blk-mq: Fix NULL pointer updating nr_requests
  blk-mq: mark request queue as mq asap
  block: Initialize max_dev_sectors to 0
  blk-mq: dynamic h/w context count
  cfq-iosched: Allow parent cgroup to preempt its child
  cfq-iosched: Allow sync noidle workloads to preempt each other
  cfq-iosched: Reorder checks in cfq_should_preempt()
  cfq-iosched: Don't group_idle if cfqq has big thinktime

Fix a comment typo.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were two issues here:
1) dma_mapping_error() return true/false but we want to return -ENOMEM
2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but
   presumably that should be -ENOMEM as well.

I changed the success path to "return 0;" instead of "return ret;" for
clarity.

Fixes: 94fe8c68 ('ks8842: Support DMA when accessed via timberdale')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Minor BPF follow-ups

Some minor last follow-ups I still had in my queue. The first one adds
readability support for __sk_buff's tc_classid member, the remaining
two are some minor cleanups. For details please see individual patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded
value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX
for this, which makes the code a bit more generic and allows to remove
BPF_TUNLEN_MAX from eBPF code.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can just add a small helper dst_tclassid() for retrieving the
dst->tclassid value. It makes the code a bit better in that we can
get rid of the ifdef from filter.c by moving this into the header.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the tc_classid from eBPF skb context is write-only, but there's
no good reason for tc programs to limit it to write-only. For example,
it can be used to transfer its state via tail calls where the resulting
tc_classid gets filled gradually.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MVNETA_BM has a dependency on MVNETA, so we can only select the former
if the latter is enabled. However, the code dependency is the reverse:
The mvneta module can call into the mvneta_bm module, so mvneta cannot
be a built-in if mvneta_bm is a module, or we get a link error:

drivers/net/built-in.o: In function `mvneta_remove':
drivers/net/ethernet/marvell/mvneta.c:4211: undefined reference to `mvneta_bm_pool_destroy'
drivers/net/built-in.o: In function `mvneta_bm_update_mtu':
drivers/net/ethernet/marvell/mvneta.c:1034: undefined reference to `mvneta_bm_bufs_free'

This avoids the problem by further clarifying the dependency so that
MVNETA_BM is a silent Kconfig option that gets turned on by the
new MVNETA_BM_ENABLE option. This way both the core HWBM module and
the MVNETA_BM code are always built-in when needed.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two issues with the current code. First one is that we need
to set res->class to 0 in case we use non-default classid matching.

This is important for the case where cls_bpf was initially set up with
an optional binding to a default class with tcf_bind_filter(), where
the underlying qdisc implements bind_tcf() that fills res->class and
tests for it later on when doing the classification. Convention for
these cases is that after tc_classify() was called, such qdiscs (atm,
drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup
based on classid.

Second, there's a bug with da mode, where res->classid is only assigned
a 16 bit minor, but it needs to expand to the full 32 bit major/minor
combination instead, therefore we need to expand with the bound major.
This is fine as classes belonging to a classful qdisc must share the
same major.

Fixes: 045efa82 ("cls_bpf: introduce integrated actions")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Young says:

====================
ldmvsw: Add ldmvsw driver

This series adds a new Logical Domains vSwitch (ldmvsw) driver.

The ldmvsw driver code will live in the drivers/net/ethernet/sun/
directory and will operate on Oracle systems running SPARC Linux in a
Logical Domains environment (typically in the control domain).

The ldmvsw driver is very similar in function to the existing sunvnet
driver. Ldmvsw creates a network interface for each "vsw-port" node
found in the Machine Description (MD) of a service domain. These
nodes correspond to ports on a vswitch created by the logical domains
manager. The created network interface(s) can be used by bridge/vswitch
software (such as the Linux bridge or Open vSwitch) to provide
guest domain(s) with network interconnectivity or connectivity
to a physical network.

Here is a example diagram of ldmvsw driver usage in a logical
domain environment to provide a guest domain with network connectivity
to a physical NIC on the service domain:

   +----------------+             +-----------------
   | Service Domain |             |  Guest domain  |
   |                |             |                |
   |  LinuxBridge   |             |                |
   |    |    |      |             |                |
   |   NIC Ldmvsw   |             |    Sunvnet     |
   +----------------+             +----------------+
        |    |           LDC              |
       LAN   ------------------------------

As stated, the sunvnet and ldmvsw drivers are _very_ similar in function.
They both create network interface(s) to receive/transmit network
traffic across LDC network channel(s). Since the driver is so similar
in function to sunvnet, the approach will be as follows to integrate
the driver and take advantage of common code:

Patch #1: Split sunvnet.c driver into sunvnet.c and sunvnet_common.c
Patch #2: Modify the sunvnet_common code and data structures to be compatible
          with both the sunvnet and ldmvsw drivers.
Patch #3: Add the new ldmvsw.c driver code
Patch #4: Checkpatch cleanup of the sunvnet/sunvnet_common code.

NOTE - Patch#1 renames a file (sunvnet.h -> sunvnet_common.h). When generating
the patches (using git format-patch), I had to use the --no-renames option
otherwise patch#1 would NOT apply using 'patch -p1' - which as I
understand is a requirement for patch acceptance. I wasn't sure if this
is proper thing to do.  Please advise if not. Thanks.

v2 changes:
  * change all EXPORT_SYMBOL declarations to EXPORT_SYMBOL_GPL
  * remove inline attribute for external function port_is_up_common()
  * Give all exported/global funcs in sunvnet_common.c a 'sunvnet_' prefix
    to avoid kernel global namespace pollution/collisions
  * ldmvsw.c: Order local variable declarations from longest to shortest line
  * ldmvsw.c: register the netdevice after all supporting state is ready/setup.
              NOTE: The consensus at Oracle is that the following functions
                    must be done AFTER register_netdev() - this is the same
                    ordering currently used in the sunvnet driver:
                    1. sunvnet_port_add_txq_common() - needs registered netdev
                    2. napi_enable() - requires registered netdev
                    3. vio_port_up() - as soon as this function is called
                                       LDC handshake messages will come in
                                       which must be handled by the napi code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Checkpatch updates for sunvnet.c and sunvnet_common.c.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Add ldmvsw.c driver

  Details:

  The ldmvsw driver very closely follows the sunvnet.c code and makes
  use of the sunvnet_common.c code for core functionality.

  A significant difference between sunvnet and ldmvsw driver is
  sunvnet creates a network interface for each vnet-port *parent*
  node in the MD while the ldmvsw driver creates a network interface
  for every vsw-port node in the Machine Description (MD).
  Therefore the netdev_priv() for sunvnet is a vnet structure while
  the netdev_priv() for ldmvsw is a vnet_port structure.

  Vnet_port structures allocated by ldmvsw have the vsw bit set.
  When finding the net_device associated with a port, the common code keys
  off this bit to use either the net_device found in the vnet_port or the
  net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in
  sunvnet_common.h). This scheme allows the common code to work with
  both drivers with minimal changes.

  Similar to Xen, network interfaces created by the ldmvsw driver will always
  have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be
  assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and
  <port_id> are a unique handle/port pair assigned to the associated
  vsw-port node in the MD.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Modify sunvnet common code and data structures to be compatible
  with both sunvnet and ldmvsw drivers.

  Details:

  Sunvnet operates on "vnet-port" nodes which appear in the Machine
  Description (MD) in a guest domain. Ldmvsw operates on "vsw-port"
  nodes which appear in the MD of a service domain.

  A difference between the sunvnet driver and the ldmvsw driver is
  the sunvnet driver creates a network interface (i.e. a struct net_device)
  for every vnet-port *parent* "network" node. Several vnet-ports may appear
  under this common parent network node - each corresponding to a common parent
  network interface.  Conversely, since bridge/vswitch software will need
  to interface with every vsw-port in a system, the ldmvsw driver creates
  a network interface (i.e. a struct net_device) for every vsw-port - not
  every parent node as with sunvnet.  This difference required some special
  handling in the common code as explained below.

  There are 2 key data structures used by the sunvnet and ldmvsw drivers
  (which are now found in sunvnet_common.h):

  1. struct vnet_port
     This structure represents a vnet-port node in sunvnet and a vsw-port
     in the ldmvsw driver.

  2. struct vnet
     This structure represents a parent "network" node in sunvnet and a parent
     "virtual-network-switch" node in ldmvsw.

  Since the sunvnet driver allocates a net_device for every parent "network"
  node, a net_device member appears in the struct vnet. Since the ldmvsw
  driver allocates a net_device for every port, a net_device member was
  added to the vnet_port. The common code distinguishes which structure
  net_device member to use by checking a 'vsw' bit that was added to the
  vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in
  sunvnet_common.h.

  The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv()
  in ldmvsw is a vnet_port. Therefore, any place in the common code
  where a netdev_priv() call was made, a wrapper function was implemented
  in each driver to first get the vnet and/or vnet_port (in a driver
  specific way) and pass them as newly added parameters to the common
  functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()).
  Since these wrapper functions call __tx_port_find(), __tx_port_find() was
  moved from the common code back into sunvnet.c. Note - ldmvsw.c does not
  require this function.

  These changes also required that port_is_up() be made
  into a common function and thus it was given a _common suffix and
  exported like the other common functions.

  A wrapper function was also added for vnet_start_xmit_common() to pass a
  driver-specific function arg to return the port associated with a given
  struct sk_buff and struct net_device. This was required because
  vnet_start_xmit_common() grabs a lock prior to getting the associated
  port. Using a function pointer arg allowed the code to work unchanged
  without risking changes to the non-trivial locking logic in
  vnet_start_xmit_common().
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Split sunvnet.c into sunvnet.c and sunvnet_common.c.

  Details:

  Since the sunvnet and ldmvsw drivers will both use common sunvnet code,
  move the functions (and support functions) anticipated to be common code
  from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to
  sunvnet_common.h. The sunvnet_common.c code will be compiled into the
  kernel and act as a library of functions that are linked by either
  (or both) drivers when loaded.

  Function names for external functions in sunvnet_common.c (to be
  called by both the sunvnet and ldmvsw drivers) were tagged with a "_common"
  suffix to clearly designate them as common functions.

  No functional changes as of yet... just moved code verbatim to the new
  sunvnet_common.c/h files.

  Makefile/Kconfig support added to build sunvnet_common.c file. The code
  is included in the kernel if SUN_LDOMS is defined/selected.

  NOTE - per the SubmittingPatches documentation, since the code was just
  moved from one file another, the code was NOT checkpatch'd in this commit
  to aid in review.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull USB fixes from Greg KH:
 "Here is a USB fix for the reported issue with commit 69bec725
  ("USB: core: let USB device know device node") as well as some other
  issues that have been reported so far with this merge window"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: uas: Reduce can_queue to MAX_CMNDS
  USB: cdc-acm: more sanity checking
  USB: usb_driver_claim_interface: add sanity checking
  usb/core: usb_alloc_dev(): fix setting of ->portnum
  USB: iowarrior: fix oops with malicious USB descriptors

Not all adapters have FC-NPIV configured. If bnx2fc is used with such an
adapter, driver would read irrelevant data from the the nvram and log
"FC-NPIV table with bad length..." In system logs.

Simply accept that reading '0' as the feature offset in nvram indicates
the feature isn't there and return.
Reported-by: NAndrew Patterson <andrew.patterson@hpe.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The result value is overwritten by a return value of
ravb_ptp_interrupt().
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>