It's an unrelated PLL filtering control bit, leave it alone when
changing the CRTC-encoder binding.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This should fix eDP on certain laptops with 18-bit panels, we were rejecting
the panel's native mode due to thinking there was insufficient bandwidth
for it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will end up quite different, it makes sense for it to be completely
separate.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On certain boards, there's BIOS scripts and memory timings that need to
be modified with the memclk.  Just pass in the entire perflvl struct and
let the chipset-specific code decide what to do.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This isn't correct everywhere yet, but since we don't use the data yet
it's perfectly safe to push in, and the information we gain from logs
will help to fix the remaining issues.

v2 (Ben Skeggs <bskeggs@redhat.com>):
- fixed up formatting
- free parsed timing info on takedown
- switched timing table printout to debug loglevel
Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Just in case someone, somewhere, does something difficult.  This also
removes one path that was different between fermi and non-fermi.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancesco Marella <fmarl@paranoici.org>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Somehow fixes some corruption seen in KDE..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Very useful for debugging buffer migration issues.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes DP output on a GTX 465 board I have.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Used on nv17-nv28, they contain memory clocks and timings, only one of
the table entries can actually be used, depending on the RAMCFG
straps, and it's usually higher than the frequency programmed on boot
by the BIOS.

The memory timings listed in table version 0x1x are used to init the
0x12xx range but they aren't required for reclocking to work.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Should fix issues noticed on NVAC (MacBook Pro / ION) since gpuobj
rework.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Found on NV3x boards, this should allow voltage modifications to work
on these chipsets.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NRoy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Build breakage:

drivers/built-in.o: In function `nouveau_acpi_edid':
(.text+0x13404e): undefined reference to `acpi_video_get_edid'
make: *** [.tmp_vmlinux1] Error 1

Introduced by:

a6ed76d7 is the first bad commit
commit a6ed76d7
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Mon Jul 12 15:33:07 2010 +1000

    drm/nouveau: support fetching LVDS EDID from ACPI

    Based on a patch from Matthew Garrett.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>

It doesn't seem to revert cleanly, but the problem lies in these
two config entries:

CONFIG_ACPI=y
CONFIG_ACPI_VIDEO=m

Adding a select for ACPI_VIDEO appears to be the best solution, and
is comparable to what is done in DRM_I915.  Builds, boots, and appears to
work correctly.
Signed-off-by: NPhilip J. Turmel <philip@turmel.org>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Guarded by a module parameter for the moment, read the code for the
magic value which enables it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Currently just hooked up to the already-existing nouveau_hw, which should
handle all relevant chipsets as well as we currently can.

This will likely be eventually split out and improved into chipset specific
code at a later point.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will make nouveau_pm attempt to report the card's current performance
level both during bootup, and through sysfs.

This is a very initial implementation, and can be improved a *lot*
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This replaces all the pll_types definitions for ones that match the types
used in the tables in recent VBIOS versions.

get_pll_limits() will now accept either type or register value as input
across all limits table versions, and will store the actual register ID
that a PLL type refers to in the returned structure.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>