drm/nv50: use pll type rather than register for CRTC PLL

Just in case someone, somewhere, does something difficult.  This also
removes one path that was different between fermi and non-fermi.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/nv50_crtc.c

@@ -266,15 +266,10 @@ nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct pll_lims pll;
-	uint32_t reg, reg1, reg2;
+	uint32_t reg1, reg2;
 	int ret, N1, M1, N2, M2, P;
 
-	if (dev_priv->chipset < NV_C0)
-		reg = NV50_PDISPLAY_CRTC_CLK_CTRL1(head);
-	else
-		reg = 0x614140 + (head * 0x800);
-
-	ret = get_pll_limits(dev, reg, &pll);
+	ret = get_pll_limits(dev, PLL_VPLL0 + head, &pll);
 	if (ret)
 		return ret;
 
@@ -286,11 +281,11 @@ nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk)
 		NV_DEBUG(dev, "pclk %d out %d NM1 %d %d NM2 %d %d P %d\n",
 			 pclk, ret, N1, M1, N2, M2, P);
 
-		reg1 = nv_rd32(dev, reg + 4) & 0xff00ff00;
-		reg2 = nv_rd32(dev, reg + 8) & 0x8000ff00;
-		nv_wr32(dev, reg, 0x10000611);
-		nv_wr32(dev, reg + 4, reg1 | (M1 << 16) | N1);
-		nv_wr32(dev, reg + 8, reg2 | (P << 28) | (M2 << 16) | N2);
+		reg1 = nv_rd32(dev, pll.reg + 4) & 0xff00ff00;
+		reg2 = nv_rd32(dev, pll.reg + 8) & 0x8000ff00;
+		nv_wr32(dev, pll.reg + 0, 0x10000611);
+		nv_wr32(dev, pll.reg + 4, reg1 | (M1 << 16) | N1);
+		nv_wr32(dev, pll.reg + 8, reg2 | (P << 28) | (M2 << 16) | N2);
 	} else
 	if (dev_priv->chipset < NV_C0) {
 		ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P);
@@ -300,10 +295,10 @@ nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk)
 		NV_DEBUG(dev, "pclk %d out %d N %d fN 0x%04x M %d P %d\n",
 			 pclk, ret, N1, N2, M1, P);
 
-		reg1 = nv_rd32(dev, reg + 4) & 0xffc00000;
-		nv_wr32(dev, reg, 0x50000610);
-		nv_wr32(dev, reg + 4, reg1 | (P << 16) | (M1 << 8) | N1);
-		nv_wr32(dev, reg + 8, N2);
+		reg1 = nv_rd32(dev, pll.reg + 4) & 0xffc00000;
+		nv_wr32(dev, pll.reg + 0, 0x50000610);
+		nv_wr32(dev, pll.reg + 4, reg1 | (P << 16) | (M1 << 8) | N1);
+		nv_wr32(dev, pll.reg + 8, N2);
 	} else {
 		ret = nv50_calc_pll2(dev, &pll, pclk, &N1, &N2, &M1, &P);
 		if (ret <= 0)
@@ -312,9 +307,9 @@ nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk)
 		NV_DEBUG(dev, "pclk %d out %d N %d fN 0x%04x M %d P %d\n",
 			 pclk, ret, N1, N2, M1, P);
 
-		nv_mask(dev, reg + 0x0c, 0x00000000, 0x00000100);
-		nv_wr32(dev, reg + 0x04, (P << 16) | (N1 << 8) | M1);
-		nv_wr32(dev, reg + 0x10, N2 << 16);
+		nv_mask(dev, pll.reg + 0x0c, 0x00000000, 0x00000100);
+		nv_wr32(dev, pll.reg + 0x04, (P << 16) | (N1 << 8) | M1);
+		nv_wr32(dev, pll.reg + 0x10, N2 << 16);
 	}
 
 	return 0;