Finn Thain says:

====================
Fixes, cleanup and modernization for SONIC ethernet drivers

Changes since v4 of combined patch series:
- Removed redundant and non-portable MACH_IS_MAC tests.
- Omitted patches unrelated to SONIC drivers.
- Dropped changes to the 'version_printed' logic and debug message text.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminate duplicated debug code by moving it into the core driver.
Don't log the only valid silicon revision number (it's in the source).

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing printk severity levels by adopting pr_foo() calls for the
platform_driver and dev_foo() calls for the nubus_driver.
Avoid KERN_CONT usage as per advice from checkpatch.
Avoid #ifdef around printk calls.
Don't log driver probe messages after calling register_netdev().

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MACH_IS_MAC test is redundant here because the platform device
won't get registered unless MACH_IS_MAC.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Reviewed-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This resolves an old issue preventing any NuBus SONIC NICs from
working in a Mac with an on-board SONIC device.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It appears that the single port Ether controllers having TSU (like SH7734/
R8A7740) need the same kind of treating in sh_eth_tsu_init() as R7S72100
currently has -- they also don't have the TSU registers related e.g. to
passing the frames between ports. Add the 'sh_eth_cpu_data::dual_port'
flag and use it as a new criterion for taking a "short path" in the TSU
init sequence in order to avoid writing to the non-existent registers...

Fixes: f0e81fec ("net: sh_eth: Add support SH7734")
Fixes: 73a0d907 ("net: sh_eth: add support R8A7740")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TSU_QTAG0/1 registers found in the Gigabit Ether controllers actually
have the same long name  as the TSU_QTAGM0/1 registers in the early Ether
controllers:  Qtag Addition/Deletion Set Register (Port 0/1 to 1/0); thus
there's no need to make a difference in sh_eth_tsu_init() between those
controllers. Unfortunately, we can't just remove TSU_QTAG0/1 from the
register *enum* because that would break the ethtool register dump...

Fixes: b0ca2a21 ("sh_eth: Add support of SH7763 to sh_eth")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts old type string formattings to new type string
formattings for adapting Linux Traffic Control (tc) unit testing suite
python3.

Linux Traffic Control (tc) unit testing suite's code quality improved is improved with this patch.
According to python documentation;
"The built-in string class provides the ability to do complex variable substitutions and
value formatting via the format() method described in PEP 3101. "
but the project was using old type formattings and new type string formattings together,
this patch's main purpose is converting all old types to new types.

Following files changed:
 1. tools/testing/selftests/tc-testing/tdc.py
 2. tools/testing/selftests/tc-testing/tdc_batch.py

Following PEP rules applied:
 1. PEP8 - Code Styling
 2. PEP3101 - Advanced Code Formatting
Signed-off-by: NBatuhan Osman Taskaya <batuhanosmantaskaya@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function xenvif_rx_skb is local to the source and does not need
to be in global scope, so make it static.

Cleans up sparse warning:
drivers/net/xen-netback/rx.c:422:6: warning: symbol 'xenvif_rx_skb'
was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Brenda J. Butler says:

====================
tools: tc-testing: better error reporting

This patch set contains a bit of cleanup and better error reporting,
esp. in pre- and post-suite, and pre- and post-case commands.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do a better job with error handling - in pre- and post-suite,
in pre- and post-case.  Show a traceback for errors.
Signed-off-by: NBrenda J. Butler <bjb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBrenda J. Butler <bjb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bit pattern LOOPBACK_SGMII is being bit-wise or'd twice; remove the
redundant 2nd LOOPBACK_SGMII
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc warns that 'resource_id' is not initialized if we don't come though
any of the three 'case' statements before:

drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.c: In function 'mlxsw_sp_kvdl_part_init':
drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.c:275:8: error: 'resource_id' may be used uninitialized in this function [-Werror=maybe-uninitialized]

In the current code, that won't happen, but it's more robust to explicitly
handle this by returning a failure from mlxsw_sp_kvdl_part_init.

Fixes: 887839e6 ("mlxsw: spectrum_kvdl: Add support for dynamic partition set")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calculating the number of entries now uses 64-bit arithmetic that
causes a link error on 32-bit architectures:

drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.o: In function `mlxsw_sp_kvdl_init':
spectrum_kvdl.c:(.text+0x51c): undefined reference to `__aeabi_uldivmod'

We could probably use a 32-bit division here as before, but since this is
not in a performance critical path, div_u64() seems cleaner here.

Fixes: 887839e6 ("mlxsw: spectrum_kvdl: Add support for dynamic partition set")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
mv88e6xxx: Poll when no interrupt defined

Not all boards using the mv88e6xxx switches have the interrupt output
connected to a GPIO. On these boards phylib has to poll the PHYs,
rather than use interrupts. Have the driver poll the interrupt status
register, which is more efficient than having phylib do it. And it
enables other switch interrupts to be services.

The Armada 370RD is such a board without a interrupt GPIO. Now that
interrupts work, wire up the PHYs to make use if them.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Ethernet switch has an embedded interrupt controller. Interrupts
from the embedded PHYs are part of this interrupt controller.
Explicitly list the MDIO bus the embedded PHYs are on, and wire up the
interrupts.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all boards have the interrupt output from the switch connected to
a GPIO line. In such cases, phylib has to poll the internal PHYs,
rather than receive an interrupt when there is a change in the link
state. phylib polls once per second, and per PHY reads around 4
words. With a switch typically having 4 internal PHYs, this means 16
MDIO transactions per second.

Rather than performing this phylib level polling, have the driver poll
the interrupt status register. If the status register indicates an
interrupt condition processing of interrupts in the same way as if a
GPIO was used.

Polling 10 times a second places less load on the MDIO bus. But rather
than taking on average 0.5s to detect a link change, it takes less
than 0.05s. Additionally, other interrupts, such as the watchdog, ATU
and VTU violations will be reported.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Up until now we only allowed VLAN devices to be put in a VLAN-unaware
bridge, but some users need the ability to enslave physical ports as
well.

This is achieved by mapping the port and VID 1 to the bridge's vFID,
instead of the port and the VID used by the VLAN device.

The above is valid because as long as the port is not enslaved to a
bridge, VID 1 is guaranteed to be configured as PVID and egress
untagged.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-02-26

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various improvements for BPF kselftests: i) skip unprivileged tests
   when kernel.unprivileged_bpf_disabled sysctl knob is set, ii) count
   the number of skipped tests from unprivileged, iii) when a test case
   had an unexpected error then print the actual but also the unexpected
   one for better comparison, from Joe.

2) Add a sample program for collecting CPU state statistics with regards
   to how long the CPU resides in cstate and pstate levels. Based on
   cpu_idle and cpu_frequency trace points, from Leo.

3) Various x64 BPF JIT optimizations to further shrink the generated
   image size in order to make it more icache friendly. When tested on
   the Cilium generated programs, image size reduced by approx 4-5% in
   best case mainly due to how LLVM emits unsigned 32 bit constants,
   from Daniel.

4) Improvements and fixes on the BPF sockmap sample programs: i) fix
   the sockmap's Makefile to include nlattr.o for libbpf, ii) detach
   the sock ops programs from the cgroup before exit, from Prashant.

5) Avoid including xdp.h in filter.h by just forward declaring the
   struct xdp_rxq_info in filter.h, from Jesper.

6) Fix the BPF kselftests Makefile for cgroup_helpers.c by only declaring
   it a dependency for test_dev_cgroup.c but not every other test case
   where it is not needed, from Jesper.

7) Adjust rlimit RLIMIT_MEMLOCK for test_tcpbpf_user selftest since the
   default is insufficient for creating the 'global_map' used in the
   corresponding BPF program, from Yonghong.

8) Likewise, for the xdp_redirect sample, Tushar ran into the same when
   invoking xdp_redirect and xdp_monitor at the same time, therefore
   in order to have the sample generically work bump the limit here,
   too. Fix from Tushar.

9) Avoid an unnecessary NULL check in BPF_CGROUP_RUN_PROG_INET_SOCK()
   since sk is always guaranteed to be non-NULL, from Yafang.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CPU is active when have running tasks on it and CPUFreq governor can
select different operating points (OPP) according to different workload;
we use 'pstate' to present CPU state which have running tasks with one
specific OPP.  On the other hand, CPU is idle which only idle task on
it, CPUIdle governor can select one specific idle state to power off
hardware logics; we use 'cstate' to present CPU idle state.

Based on trace events 'cpu_idle' and 'cpu_frequency' we can accomplish
the duration statistics for every state.  Every time when CPU enters
into or exits from idle states, the trace event 'cpu_idle' is recorded;
trace event 'cpu_frequency' records the event for CPU OPP changing, so
it's easily to know how long time the CPU stays in the specified OPP,
and the CPU must be not in any idle state.

This patch is to utilize the mentioned trace events for pstate and
cstate statistics.  To achieve more accurate profiling data, the program
uses below sequence to insure CPU running/idle time aren't missed:

- Before profiling the user space program wakes up all CPUs for once, so
  can avoid to missing account time for CPU staying in idle state for
  long time; the program forces to set 'scaling_max_freq' to lowest
  frequency and then restore 'scaling_max_freq' to highest frequency,
  this can ensure the frequency to be set to lowest frequency and later
  after start to run workload the frequency can be easily to be changed
  to higher frequency;

- User space program reads map data and update statistics for every 5s,
  so this is same with other sample bpf programs for avoiding big
  overload introduced by bpf program self;

- When send signal to terminate program, the signal handler wakes up
  all CPUs, set lowest frequency and restore highest frequency to
  'scaling_max_freq'; this is exactly same with the first step so
  avoid to missing account CPU pstate and cstate time during last
  stage.  Finally it reports the latest statistics.

The program has been tested on Hikey board with octa CA53 CPUs, below
is one example for statistics result, the format mainly follows up
Jesper Dangaard Brouer suggestion.

Jesper reminds to 'get printf to pretty print with thousands separators
use %' and setlocale(LC_NUMERIC, "en_US")', tried three different arm64
GCC toolchains (5.4.0 20160609, 6.2.1 20161016, 6.3.0 20170516) but all
of them cannot support printf flag character %' on arm64 platform, so go
back print number without grouping mode.

CPU states statistics:
state(ms)  cstate-0    cstate-1    cstate-2    pstate-0    pstate-1    pstate-2    pstate-3    pstate-4
CPU-0      767         6111        111863      561         31          756         853         190
CPU-1      241         10606       107956      484         125         646         990         85
CPU-2      413         19721       98735       636         84          696         757         89
CPU-3      84          11711       79989       17516       909         4811        5773        341
CPU-4      152         19610       98229       444         53          649         708         1283
CPU-5      185         8781        108697      666         91          671         677         1365
CPU-6      157         21964       95825       581         67          566         684         1284
CPU-7      125         15238       102704      398         20          665         786         1197

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Daniel Borkmann says:

====================
Couple of minor improvements to the x64 JIT I had still around from
pre merge window in order to shrink the image size further. Added
test cases for kselftests too as well as running Cilium workloads on
them w/o issues.
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add few test cases that check the rnu-time results under JIT.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

While it's rather cumbersome to reduce prologue for cBPF->eBPF
migrations wrt spill/fill for r15 which is callee saved register
due to bpf_error path in bpf_jit.S that is both used by migrations
as well as native eBPF, we can still trivially save 5 bytes in
prologue for the former since tail calls can never be used there.
cBPF->eBPF migrations also have their own custom prologue in BPF
asm that xors A and X reg anyway, so it's fine we skip this here.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add a generic emit_mov_reg() helper in order to reuse it in BPF
multiplication to load the src into rax, we can save a few bytes
in alu32 while doing so.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Instead of unconditionally performing push/pop on rax/rdx
in case of multiplication, we can save a few bytes in case
of dest register being either BPF r0 (rax) or r3 (rdx)
since the result is written in there anyway.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

While analyzing some of the more complex BPF programs from Cilium,
I found that LLVM generally prefers to emit LD_IMM64 instead of MOV32
BPF instructions for loading unsigned 32-bit immediates into a
register. Given we cannot change the current/stable LLVM versions
that are already out there, lets optimize this case such that the
JIT prefers to emit 'mov %eax, imm32' over 'movabsq %rax, imm64'
whenever suitable in order to reduce the image size by 4-5 bytes per
such load in the typical case, reducing image size on some of the
bigger programs by up to 4%. emit_mov_imm32() and emit_mov_imm64()
have been added as helpers.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

When we shift by one, we can use a different encoding where imm
is not explicitly needed, which saves 1 byte per such op.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Pull networking fixes from David Miller:

 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.

 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.

 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.

 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.

 5) Fix potential deadlocks in netfilter getsockopt() code paths, from
    Paolo Abeni.

 6) Netfilter stackpointer size checks really are needed to validate
    user input, from Florian Westphal.

 7) Missing timer init in x_tables, from Paolo Abeni.

 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.

 9) When an ibmvnic device is brought down then back up again, it can be
    sent queue entries from a previous session, handle this properly
    instead of crashing. From Thomas Falcon.

10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.

11) When we are dumping filters in cls_api, the output SKB is empty, and
    the filter we are dumping is too large for the space in the SKB, we
    should return -EMSGSIZE like other netlink dump operations do.
    Otherwise userland has no signal that is needs to increase the size
    of its read buffer. From Roman Kapl.

12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.

13) Module refcount leak in netlink when a dump start fails, from Jason
    Donenfeld.

14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
    from Eric Dumazet.

15) Releasing bpf per-cpu arraymaps can take a long time, add a
    condtional scheduling point. From Eric Dumazet.

16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
    Daniel Borkmann.

17) Fix page leak in gianfar driver, from Andy Spencer.

18) Missed clearing of estimator scratch buffer, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net_sched: gen_estimator: fix broken estimators based on percpu stats
  gianfar: simplify FCS handling and fix memory leak
  ipv6 sit: work around bogus gcc-8 -Wrestrict warning
  macvlan: fix use-after-free in macvlan_common_newlink()
  bpf, arm64: fix out of bounds access in tail call
  bpf, x64: implement retpoline for tail call
  rxrpc: Fix send in rxrpc_send_data_packet()
  net: aquantia: Fix error handling in aq_pci_probe()
  bpf: fix rcu lockdep warning for lpm_trie map_free callback
  bpf: add schedule points in percpu arrays management
  regulatory: add NUL to request alpha2
  ibmvnic: Fix early release of login buffer
  net/smc9194: Remove bogus CONFIG_MAC reference
  net: ipv4: Set addr_type in hash_keys for forwarded case
  tcp_bbr: better deal with suboptimal GSO
  smsc75xx: fix smsc75xx_set_features()
  netlink: put module reference if dump start fails
  selftests/bpf/test_maps: exit child process without error in ENOMEM case
  selftests/bpf: update gitignore with test_libbpf_open
  selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
  ..

Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris:

 - keys fixes via David Howells:
      "A collection of fixes for Linux keyrings, mostly thanks to Eric
       Biggers:

        - Fix some PKCS#7 verification issues.

        - Fix handling of unsupported crypto in X.509.

        - Fix too-large allocation in big_key"

 - Seccomp updates via Kees Cook:
      "These are fixes for the get_metadata interface that landed during
       -rc1. While the new selftest is strictly not a bug fix, I think
       it's in the same spirit of avoiding bugs"

 - an IMA build fix from Randy Dunlap

* 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity/security: fix digsig.c build error with header file
  KEYS: Use individual pages in big_key for crypto buffers
  X.509: fix NULL dereference when restricting key with unsupported_sig
  X.509: fix BUG_ON() when hash algorithm is unsupported
  PKCS#7: fix direct verification of SignerInfo signature
  PKCS#7: fix certificate blacklisting
  PKCS#7: fix certificate chain verification
  seccomp: add a selftest for get_metadata
  ptrace, seccomp: tweak get_metadata behavior slightly
  seccomp, ptrace: switch get_metadata types to arch independent

Pull arm64 fixes from Catalin Marinas:
 "arm64 and perf fixes:

   - build error when accessing MPIDR_HWID_BITMASK from .S

   - fix CTR_EL0 field definitions

   - remove/disable some kernel messages on user faults (unhandled
     signals, unimplemented syscalls)

   - fix kernel page fault in unwind_frame() with function graph tracing

   - fix perf sleeping while atomic errors when booting with ACPI"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix unwind_frame() for filtered out fn for function graph tracing
  arm64: Enforce BBM for huge IO/VMAP mappings
  arm64: perf: correct PMUVer probing
  arm_pmu: acpi: request IRQs up-front
  arm_pmu: note IRQs and PMUs per-cpu
  arm_pmu: explicitly enable/disable SPIs at hotplug
  arm_pmu: acpi: check for mismatched PPIs
  arm_pmu: add armpmu_alloc_atomic()
  arm_pmu: fold platform helpers into platform code
  arm_pmu: kill arm_pmu_platdata
  ARM: ux500: remove PMU IRQ bouncer
  arm64: __show_regs: Only resolve kernel symbols when running at EL1
  arm64: Remove unimplemented syscall log message
  arm64: Disable unhandled signal log messages by default
  arm64: cpufeature: Fix CTR_EL0 field definitions
  arm64: uaccess: Formalise types for access_ok()
  arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files

Pull MIPS fix from James Hogan:
 "A single MIPS fix for mismatching struct compat_flock, resulting in
  bus errors starting Firefox on Debian 8 since 4.13"

* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Drop spurious __unused in struct compat_flock

Pull printk fixlet from Petr Mladek:
 "People expect to see the real pointer value for %px.

  Let's substitute '(null)' only for the other %p? format modifiers that
  need to deference the pointer"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  vsprintf: avoid misleading "(null)" for %px

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes, one v4.16 regression fix, and two documentation fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Consider SCL GPIO optional
  i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".
  i2c: bcm2835: Set up the rising/falling edge delays
  i2c: i801: Add missing documentation entries for Braswell and Kaby Lake
  i2c: designware: must wait for enable

Pull SCSI fixes from James Bottomley:
 "These are mostly fixes for problems with merge window code.

  In addition we have one doc update (alua) and two dead code removals
  (aiclib and octogon) a spurious assignment removal (csiostor) and a
  performance improvement for storvsc involving better interrupt
  spreading and increasing the command per lun handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Cleanup local str variable
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: qla2xxx: Fix incorrect handle for abort IOCB
  scsi: qla2xxx: Fix double free bug after firmware timeout
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  scsi: scsi_dh: Document alua_rtpg_queue() arguments
  scsi: Remove Makefile entry for oktagon files
  scsi: aic7xxx: remove aiclib.c
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: csiostor: remove redundant assignment to pointer 'ln'
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write

For ages iproute2 has used `struct rtmsg` as the ancillary header for
FIB rules and in the process set the protocol value to RTPROT_BOOT.
Until ca56209a66 ("net: Allow a rule to track originating protocol")
the kernel rules code ignored the protocol value sent from userspace
and always returned 0 in notifications. To avoid incompatibility with
existing iproute2, send the protocol as a new attribute.

Fixes: cac56209 ("net: Allow a rule to track originating protocol")
Signed-off-by: NDonald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "A bunch of fixes for rc3:

  Exynos:
   - fixes for using monotonic timestamps
   - register definitions
   - removal of unused file

  ipu-v3L
   - minor changes
   - make some register arrays const+static
   - fix some leaks

  meson:
   - fix for vsync

  atomic:
   - fix for memory leak

  EDID parser:
   - add quirks for some more non-desktop devices
   - 6-bit panel fix.

  drm_mm:
   - fix a bug in the core drm mm hole handling

  cirrus:
   - fix lut loading regression

  Lastly there is a deadlock fix around runtime suspend for secondary
  GPUs.

  There was a deadlock between one thread trying to wait for a workqueue
  job to finish in the runtime suspend path, and the workqueue job it
  was waiting for in turn waiting for a runtime_get_sync to return.

  The fixes avoids it by not doing the runtime sync in the workqueue as
  then we always wait for all those tasks to complete before we runtime
  suspend"

* tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits)
  drm/tve200: fix kernel-doc documentation comment include
  drm/edid: quirk Sony PlayStation VR headset as non-desktop
  drm/edid: quirk Windows Mixed Reality headsets as non-desktop
  drm/edid: quirk Oculus Rift headsets as non-desktop
  drm/meson: fix vsync buffer update
  drm: Handle unexpected holes in color-eviction
  drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
  drm/exynos: remove exynos_drm_rotator.h
  drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
  drm/exynos: fix comparison to bitshift when dealing with a mask
  drm/exynos: g2d: use monotonic timestamps
  drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
  gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
  gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
  gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
  drm/amdgpu: Fix deadlock on runtime suspend
  drm/radeon: Fix deadlock on runtime suspend
  drm/nouveau: Fix deadlock on runtime suspend
  drm: Allow determining if current task is output poll worker
  ...

The packet fanout test generates UDP traffic and reads this with
a pair of packet sockets, testing the various fanout algorithms.

Avoid non-determinism from reading unrelated background traffic.
Fanout decisions are made before unrelated packets can be dropped with
a filter, so that is an insufficient strategy [*]. Run the packet
socket tests in a network namespace, similar to msg_zerocopy.

It it still good practice to install a filter on a packet socket
before accepting traffic. Because this is example code, demonstrate
that pattern. Open the socket initially bound to no protocol, install
a filter, and only then bind to ETH_P_IP.

Another source of non-determinism is hash collisions in FANOUT_HASH.
The hash function used to select a socket in the fanout group includes
the pseudorandom number hashrnd, which is not visible from userspace.
To work around this, the test tries to find a pair of UDP source ports
that do not collide. It gives up too soon (5 times, every 32 runs) and
output is confusing. Increase tries to 20 and revise the error msg.

[*] another approach would be to add a third socket to the fanout
    group and direct all unexpected traffic here. This is possible
    only when reimplementing methods like RR or HASH alongside this
    extra catch-all bucket, using the BPF fanout method.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zero is being bit-wise or'd in a calculation twice; these are redundant
and can be removed.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>