because there seems to be more time needed to implement this.
Also, change related error return values to more appropriate ones.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: update boards files
  Blackfin arch: dma add some API and cleanup bf54x DMA definition
  Blackfin arch: cleanup and promote the general purpose timers api to a core blackfin component
  Blackfin arch: add a cheesy install target
  Blackfin arch: add functions for converting between sclks and usecs
  Blackfin arch: add assembly function for doing 64bit unsigned division
  Blackfin arch: -mno-fdpic works
  Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage
  Blackfin arch: Fixing Bug: balance calls to get_task_mm with corresponding mmput calls
  Blackfin serial driver Kconfig: depend on DMA not being enabled rather than a specific DMA size
  Blackfin arch: Fix bug: missing CHIPID register field definition of BF54x
  Blackfin arch: Fix up /proc/cpuinfo so it is like everyone else
  Blackfin arch: Optimization - no need to make additional math here
  Blackfin arch: force irq_flags into the .data section
  Blackfin arch BF548 defconfig: enable watchdog by default
  Blackfin arch: add new processor ADSP-BF52x arch/mach support

* 'audit.b43' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] audit: watching subtrees
  [PATCH] new helper - inotify_evict_watch()
  [PATCH] new helper - inotify_clone_watch()
  [PATCH] new helpers - collect_mounts() and release_collected_mounts()
  [PATCH] pass dentry to audit_inode()/audit_inode_child()

This path mustn't have been tested :( I did attempt to exercise it
by injecting failures here, but I suspect PageMappedToDisk may have
been getting in the way. Will need more of a look, although I think
nobh mode is OK for an -rc1 (it shouldn't eat anyone's data).

Commit 03158cd7 ("fs: restore nobh")
introcduced a NULL deref.  Spotted by the Coverity checker.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

now that -mno-fdpic works, force it on so that
we can use any blackfin toolchain to build up the
kernel and kernel modules

wrap -mno-fdpic in $(call cc-option,-mno-fdpic) so that older
toolchains will still work
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

We must balance calls to get_task_mm with corresponding mmput calls, otherwise
refcounting is screwed up and mms don't get freed when their task exits.
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Fix up /proc/cpuinfo so it is like everyone else, and gets
parsed by various applications properly. Still needs some tweaking on
parts without full L1 sram, like 532, 531, so it doesn't print out L1
bank info that doesn't exist.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

force irq_flags into the .data section by initializing it to
the hardware masks that cannot be disabled.  this way if we
use irq enable/disable functions before the .bss has been
zeroed out (as does our l1 relocate/dma functions), we dont
hit a problem where bss contains bogus crap.
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

New kind of audit rule predicates: "object is visible in given subtree".
The part that can be sanely implemented, that is.  Limitations:
	* if you have hardlink from outside of tree, you'd better watch
it too (or just watch the object itself, obviously)
	* if you mount something under a watched tree, tell audit
that new chunk should be added to watched subtrees
	* if you umount something in a watched tree and it's still mounted
elsewhere, you will get matches on events happening there.  New command
tells audit to recalculate the trees, trimming such sources of false
positives.

Note that it's _not_ about path - if something mounted in several places
(multiple mount, bindings, different namespaces, etc.), the match does
_not_ depend on which one we are using for access.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Kicks the watch out without dropping it.  Called under ->inotify_mutex
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Get a snapshot of a subtree, creating private clones of vfsmounts
for all its components and release such snapshot resp.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

makes caller simpler *and* allows to scan ancestors
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
  [PARISC] fix uninitialized variable warning in asm/rtc.h
  [PARISC] Port checkstack.pl to parisc
  [PARISC] Make palo target work when $obj != $src
  [PARISC] Zap unused variable warnings in pci.c
  [PARISC] Fix tests in palo target
  [PARISC] Fix palo target
  [PARISC] Restore palo target
  [PARISC] Attempt to clean up parisc/Makefile
  [PARISC] Fix infinite loop in /proc/iomem
  [PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
  [PARISC] Squelch pci_enable_device __must_check warning in superio
  [PARISC] Kill off broken irqstack code
  [PARISC] Remove hardcoded uses of PAGE_SIZE
  [PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
  [PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
  [PARISC] Kill off ASM_PAGE_SIZE use
  [PARISC] Beautify parisc vmlinux.lds.S
  [PARISC] Clean up a resource_size_t warning in sba_iommu
  [PARISC] Kill incorrect cast warning in unwinder
  [PARISC] Kill zone_to_nid printk warning
  ...

Fixed trivial conflict in include/asm-parisc/tlbflush.h manually

* ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: restore arch/{ppc/xtensa}/boot cflags
  kconfig: set title bar in xconfig
  kbuild: fix toplevel Makefile/depmod

Add new maintainers for the x86 (32-bit and 64-bit) architecture.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7b96dc02 ("[SPARC] Videopix Frame
Grabber: Convert device_lock_sem to mutex") missed one place.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wrong order of arguments
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_rtc_time, in the case that PDC returns that the battery is bad, returns
an unmodified rtc_time arg to the caller, which then uses uninitialized
values. Fix this by memset-ing the arg with zeroes, so it will at least be
cleared if we return failure.

Spotted by John David Anglin.
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Commit 9a39e273 removed the boot directory
addition to CFLAGS that was being used by the subdirectory builds.  For the
other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly
sets that to empty as it is explicitly for a single directory only.
Append to KBUILD_CFLAGS instead.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This removes a syntax error (seen building on Ubuntu Feisty).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Stumbled upon when I was testing it out and using
make O=... to build.
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

'bus' was basically useless and 'hba' is only applicable on
64bit. Sigh, there's got to be a cleaner way to do this...
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

This reverts commit a5bf3d89.

David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:

  "That Kconfig hasn't changed (other than adding new drivers), and it's
   worked that way for several years now ...  so the issue seems to be
   changes in menuconfig/kconfig/etc semantics.

   The issue is that when USB_GADGET=m, it's no longer possible to
   configure peripheral controller drivers as modules ...  the
   controller drivers can now only be configured for static linkage.

   It should be making a choice of one of the controller drivers which
   could work on the target system, and allow that driver to be linked
   either as a module (ok iff USB_GADGET=m) or statically."

Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.
Tested-and-reported-by: NDavid Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>