- 17 5月, 2007 39 次提交
-
-
由 David Gibson 提交于
This patch corrects a number of minor errors in the Ebony device tree: - Missing (given as 0) cache sizes are added to the CPU node - device_type properties are removed from nodes which don't have a reasonably well defined device_type binding. This does require a very small code change to locate the busses to be probed for of_platform devices by 'compatible' instead of 'device_type'. - A node is added for the SRAM controller - The unit address of the small-flash node is adjusted to correctly reflect the reg property. - device_type values for the MAL and ZMII are updated to reflected more up-to-date versions of the binding. - An incorrect offset in the partition map for the large-flash node is corrected. - Some redundant values, already commented out are removed entirely. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
arch/powerpc/platforms/pseries/pseries.h:24: warning: return type defaults to 'int' arch/powerpc/platforms/pseries/pseries.h:25: warning: return type defaults to 'int' arch/powerpc/platforms/pseries/pseries.h:24: warning: control reaches end of non-void function arch/powerpc/platforms/pseries/pseries.h:25: warning: control reaches end of non-void function Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christian Krafft 提交于
Cpufreq using pmi is broken by a dependency issue, that will be fixed in a seperate patch. Bare-metal cpufreq is broken by hardware limitations. As it was the only user, pmi is disabled as well. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
request_phb_iospace() can be called from different CPUs at init time (at least with my next patch) and thus needs a spinlock. As for the next patch, this is a temporary workaround for 2.6.22 issues until my rewrite of IO mappings is ready (for 2.6.23) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
At present attempting to build treeImage.initrd.* boot images will fail, because make will select the treeImage.% rule which also matches instead of the correct and more specific treeImage.initrd.% rule. This patch corrects the problem by listing the more specific rule first. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
arch/powerpc/sysdev/mpic.c: In function 'mpic_request_ipis': arch/powerpc/sysdev/mpic.c:1445: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Update pasemi_defconfig, add new relevant drivers. Take out CONFIG_PPC_PSERIES, it should't have been enabled in the first place. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Current kernel implements proper TB sync, no need to keep GENERIC_TBSYNC enabled. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
signalfd, timerfd and eventfd Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
ft_set_prop() from flatdevtree.c in the zImage wrapper will either replace an existing property in the flat device tree, or add a new property definiion if the given property isn't present. However, when adding properties, it adds the property definition immediately before the node's END_NODE tag, potentially after any subnode definitions for the node. This confuses the kernel flat tree parser in prom.c which assumes that all property definitions for a node come before all subnode definitions. This patch corrects ft_set_prop() so that it adds new properties before the first subnode, instead of before the END_NODE tag. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Acked-by: NScott Wood <scottwood@freescale.com> Acked-by: NMark A. Greer <mgreer@mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
There are no actual implementations of fixup_bigphys_addr() in arch/powerpc, and with a 64-bit aware ioremap() and so forth, it should no longer be necessary. This patch removes the last dregs of fixup_bigphys_addr() from arch/powerpc. In fact, the only reason this hasn't caused link errors already is that nobody must have tried using one of the small number of drivers using io_remap_pfn_range() on one of the small number of platforms which are 32-bit but define CONFIG_PHYS_64BIT. Nonetheless this fixes a bug, and should go into 2.6.22. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Use a completion instead of abusing a semaphore for hypervisor event completion in viopath. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
An allmodconfig on the current powerpc tree yields: arch/powerpc/platforms/44x/Kconfig:41:warning: 'select' used by config symbol '440GP' refers to undefined symbol 'IBM_NEW_EMAC_ZMII' Hide the select until the driver exists. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
Remove explicit phandles and move to using references that autogenerate the phandles when needed. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Morten Banzon 提交于
Adds the MCC2 device to the 826x device_list and fixed MCC1/MCC2 entries in all other PQ2 processors. Signed-off-by: NMorten Banzon <morten.banzon@ericsson.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Adding memory-controller and l2-cache-controller entries to be used by EDAC as of_devices for MPC8541 CDS, MPC8544 DS, MPC8555 CDS, and MPC8568 MDS. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Dave Jiang 提交于
Adding memory-controller and l2-cache-controller entries to be used by EDAC as of_devices for MPC8540 ADS, MPC8548 CDS, and MPC8560 ADS. Also fixed up the size of the PCI node on MPC8560 ADS. Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
When an rheap is created, the caller can specify the alignment to use. In rh_alloc_align(), if a free block is found that is the exact size needed (including extra space for alignment), that configured alignment value is not used to align the pointer. Instead, the default alignment is used. If the default alignment is smaller than the configured alignment, then the returned value will not be aligned correctly. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
We get the following warnings in various ARCH=powerpc builds: WARNING: "ee_restarts" [arch/powerpc/kernel/built-in] is COMMON symbol WARNING: "fee_restarts" [arch/powerpc/kernel/built-in] is COMMON symbol WARNING: "htab_hash_searches" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "next_slot" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "mmu_hash_lock" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "primary_pteg_full" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "global_dbcr0" [arch/powerpc/kernel/built-in] is COMMON symbol Switch to moving local symbols (except mmu_hash_lock which is global) and space directive instead. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Dave Jiang 提交于
The early kernel parameter is wdt and not wdt_enable. according to arch/powerpc/kernel/setup_32.c. Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 James.Yang 提交于
Remove CPU_FTR_NEED_COHERENT for MPC7448 (and single-core MPC86xx). This prevents needlessly setting M=1 when not SMP. Signed-off-by: NJames.Yang <James.Yang@freescale.com> Acked-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Becky Bruce 提交于
Change several headers in include/asm-powerpc that currently use some variation of ASM_PPC to use ASM_POWERPC instead. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: track spindown status and skip spindown_compat if possible libata: fix shutdown warning message printing libata-acpi: add ATA_FLAG_ACPI_SATA port flag libata: during revalidation, check n_sectors after device is configured libata: separate out ata_dev_reread_id() pata_scc had been missed by ata_std_prereset() switch
-
由 Linus Torvalds 提交于
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] usbaudio - Coping with short replies in usbmixer [ALSA] Include quirks from Ubuntu Dapper/Edgy/Feisty [ALSA] Fix probe of non-PnP ISA devices [ALSA] version 1.0.14rc4 [ALSA] hda-codec - Fix ALC882/861VD codec support on some laptops [ALSA] ASoC AC97 device reg bugfix [ALSA] ASoC AC97 static GPL symbol fix [ALSA] hda-codec - Make the mixer capability check more robust [ALSA] usb-audio: another Logitech QuickCam ID
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Implement platform hooks for atmel_lcdfb driver [AVR32] Wire up signalfd, timerfd and eventfd [AVR32] optimize pagefault path [AVR32] Remove bogus comment in arch/avr32/kernel/irq.c
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add hypervisor API negotiation and fix console bugs.
-
由 Christoph Lameter 提交于
We call alloc_page where we should be calling __page_cache_alloc. __page_cache_alloc performs cpuset memory spreading. alloc_page does not. There is no reason that pages allocated via find_or_create should be exempt. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
alpha: drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma': drivers/parport/parport_pc.c:636: warning: implicit declaration of function 'dma_map_single' drivers/parport/parport_pc.c:637: error: 'DMA_TO_DEVICE' undeclared (first use in this function) drivers/parport/parport_pc.c:637: error: (Each undeclared identifier is reported only once drivers/parport/parport_pc.c:637: error: for each function it appears in.) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Domen Puncer 提交于
find_first_zero_bit accepts number of bits, not longs. Signed-off-by: NDomen Puncer <domen.puncer@telargo.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
afs_prepare_write() should not mark a page up to date if it only partially fills it in, in expectation of the caller filling in the rest prior to calling commit_write(). commit_write(), however, should mark the page up to date. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
kmem_cache_create() was swapping ctor and dtor in calling find_mergeable(): though it caused no bug, and probably never would, even if destructors are retained; but fix it so as not to generate anxiety ;) Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Sorry I screwed up the comparison. It is only an error if we attempt to allocate a slab larger than the maximum allowed size. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix AFS to write back dirty on unmounting. This didn't happen because afs_super_ops.drop_inode was pointing to generic_delete_inode. Now this pointer is left set to NULL so that the default behaviour occurs instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] optimize pagefaults a little [IA64] Fix section conflict of ia64_mlogbuf_finish [IA64] s/scalibility/scalability/ [IA64] kdump on INIT needs multi-nodes sync-up (v.2) [IA64] wire up {signal,timer,event}fd syscalls [IA64] spelling fixes: arch/ia64/
-
由 Linus Torvalds 提交于
In commit e3c7db62 we fixed the resume ordering, so that the ACPI low-level resume code was called before the actual driver resume was called. However, that broke the nesting logic of suspend and resume, and we continued to suspend the devices _after_ we the ACPI device suspend code was called. That resulted in us saving PCI state for devices that had already been changed by ACPI, and in some cases disabled entirely (causing the PCI save_state to be all-ones). Which in turn caused the wrong state to be written back on resume. This moves the ACPI device suspend to after the device model per-device suspend() calls. This fixes the bogus state save. Thanks to Lukáš Hejtmánek for testing. Acked-by: NLukas Hejtmanek <xhejtman@ics.muni.cz> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Get rid of the notifier list and call the kprobes code directly if compiled in. This mirrors the changes that recently went into powerpc, s390 and sparc64. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 16 5月, 2007 1 次提交
-
-
由 Thomas Reitmayr 提交于
This patch makes sure that short USB replies are treated as an error when requesting the value of a certain mixer control. Signed-off-by: NThomas Reitmayr <thomas@devbase.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-