提交 c72ea777 编写于 作者: D David Gibson 提交者: Paul Mackerras

[POWERPC] Small fixes for the Ebony device tree

This patch corrects a number of minor errors in the Ebony device tree:
	- Missing (given as 0) cache sizes are added to the CPU node
	- device_type properties are removed from nodes which don't
have a reasonably well defined device_type binding.  This does require
a very small code change to locate the busses to be probed for
of_platform devices by 'compatible' instead of 'device_type'.
	- A node is added for the SRAM controller
	- The unit address of the small-flash node is adjusted to
correctly reflect the reg property.
	- device_type values for the MAL and ZMII are updated to
reflected more up-to-date versions of the binding.
	- An incorrect offset in the partition map for the large-flash
node is corrected.
	- Some redundant values, already commented out are removed
entirely.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 f7c0d13b
......@@ -33,8 +33,8 @@
timebase-frequency = <0>; // Filled in by zImage
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <0>;
d-cache-size = <0>;
i-cache-size = <8000>; /* 32 kB */
d-cache-size = <8000>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
......@@ -46,7 +46,6 @@
};
UIC0: interrupt-controller0 {
device_type = "ibm,uic";
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <0>;
......@@ -58,7 +57,6 @@
};
UIC1: interrupt-controller1 {
device_type = "ibm,uic";
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <1>;
......@@ -71,36 +69,36 @@
};
CPC0: cpc {
device_type = "ibm,cpc";
compatible = "ibm,cpc-440gp";
dcr-reg = <0b0 003 0e0 010>;
// FIXME: anything else?
};
plb {
device_type = "ibm,plb";
compatible = "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; // Filled in by zImage
SDRAM0: sdram {
device_type = "memory-controller";
compatible = "ibm,sdram-440gp", "ibm,sdram";
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
dcr-reg = <010 2>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
dcr-reg = <020 8 00a 1>;
};
DMA0: dma {
// FIXME: ???
device_type = "ibm,dma-4xx";
compatible = "ibm,dma-440gp", "ibm,dma-4xx";
compatible = "ibm,dma-440gp";
dcr-reg = <100 027>;
};
MAL0: mcmal {
device_type = "mcmal-dma";
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
dcr-reg = <180 62>;
num-tx-chans = <4>;
......@@ -119,7 +117,6 @@
};
POB0: opb {
device_type = "ibm,opb";
compatible = "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
......@@ -133,8 +130,7 @@
clock-frequency = <0>; // Filled in by zImage
EBC0: ebc {
device_type = "ibm,ebc";
compatible = "ibm,ebc-440gp";
compatible = "ibm,ebc-440gp", "ibm,ebc";
dcr-reg = <012 2>;
#address-cells = <2>;
#size-cells = <1>;
......@@ -147,7 +143,7 @@
interrupts = <5 4>;
interrupt-parent = <&UIC1>;
small-flash@0,0 {
small-flash@0,80000 {
device_type = "rom";
compatible = "direct-mapped";
probe-type = "JEDEC";
......@@ -159,7 +155,6 @@
ds1743@1,0 {
/* NVRAM & RTC */
device_type = "nvram";
compatible = "ds1743";
reg = <1 0 2000>;
};
......@@ -170,7 +165,7 @@
probe-type = "JEDEC";
bank-width = <1>;
partitions = <0 380000
280000 80000>;
380000 80000>;
partition-names = "fs", "firmware";
reg = <2 0 400000>;
};
......@@ -226,13 +221,11 @@
GPIO0: gpio@40000700 {
/* FIXME */
device_type = "gpio";
compatible = "ibm,gpio-440gp";
reg = <40000700 20>;
};
ZMII0: emac-zmii@40000780 {
device_type = "emac-zmii";
compatible = "ibm,zmii-440gp", "ibm,zmii";
reg = <40000780 c>;
};
......@@ -299,9 +292,5 @@
chosen {
linux,stdout-path = "/plb/opb/serial@40000200";
// linux,initrd-start = <0>; /* FIXME */
// linux,initrd-end = <0>;
// bootargs = "";
};
};
......@@ -27,9 +27,9 @@
#include "44x.h"
static struct of_device_id ebony_of_bus[] = {
{ .type = "ibm,plb", },
{ .type = "ibm,opb", },
{ .type = "ibm,ebc", },
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
{ .compatible = "ibm,ebc", },
{},
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册