mainline inclusion
from mainline-master
commit e65e9f5c
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e65e9f5c2e4efc17657d016d767eb7010d9dd598

----------------------------------------------------------------------

IMP(Intelligent Management Processor) firmware add a new feature to
handle and consolidate RAS information for new devices, NIC driver
only needs to query the reported RAS information. NIC driver adds
support for this feature.

Driver queries device capability to check whether IMP support this
feature, If yes, execute the new RAS processing branch.

In order to add a method to check whether PF supports imp-handle RAS
feature, add dumping this info in debugfs.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2e2deee7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2e2deee7618b062efe3aba9fcb017dadcf148819

----------------------------------------------------------------------

To adapt to hardware modification and ensure that the driver is
compatible with the original error handling content, we need to add the
RAS compatibility adaptation solution.

Add a processing branch to the driver during error handling. In the new
processing branch, NIC fault information is integrated by the IMP. An
interaction command is added between the driver and IMP to query
and clear the fault source and interrupt source. The IMP integrates
error information and reports the highest reset level to the driver.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2ba30662
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ba306627f5950c9a7850f3b0499d39e522dc249

----------------------------------------------------------------------

Previously, with hardware limitation, the port VLAN filter are
effective for both PF and its VFs simultaneously, so a single
function is not able to enable/disable separately, and the VLAN
filter state is default enabled. Now some device supports each
function to bypass port VLAN filter, then each function can
switch VLAN filter separately. Add capability flag to check
whether the device supports modify VLAN filter state. If flag
on, user will be able to modify the VLAN filter state by ethtool
-K.

Furtherly, the default VLAN filter state is also changed
according to whether non-zero VLAN used. Then the device can
receive packet with any VLAN tag if only VLAN 0 used.

The function hclge_need_enable_vport_vlan_filter() is used to
help implement above changes. And the VLAN filter handle for
promisc mode can also be simplified by this function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0b198b0d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0b198b0d80ea091f2a917536a097adefb2eaa52f

----------------------------------------------------------------------

Currently, the debugfs command for m7 info is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"imp_info" for it, and query it by command "cat imp_info",
return the result to userspace, rather than record in dmesg.

The display style is below:
$cat imp_info
offset | data
0x0000 | 0x00000000  0x00000000
0x0008 | 0x00000000  0x00000000
0x0010 | 0x00000000  0x00000001
0x0018 | 0x00000000  0x00000000
0x0020 | 0x00000000  0x00000000
0x0028 | 0x00000000  0x00000000
0x0030 | 0x00000000  0x00000000
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 79664077
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=796640778c26f3d99fde173bb7b1d726b5f0d816

----------------------------------------------------------------------

Currently, the driver gets packet type by parsing the
L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's
time-consuming.

Now some new devices support RXD advanced layout, which combines
previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets
packet type by looking up only one table, and L3_ID/L4_ID become
reserved fields.

Considering compatibility, the firmware will report capability of
RXD advanced layout, the driver will identify and enable it by
default. This patch provides basic function: identify and enable
the RXD advanced layout, and refactor out hns3_rx_checksum() by
using ptype table to handle RX checksum if supported.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8fa86551
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8fa865510069aa1364f50761d38418dec4c163df

----------------------------------------------------------------------

Currently, the queue reset process needs to be performed one by
one, which is inefficient. However, the queue reset of the same
function is always performed at the same time. Therefore, according
to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset
all queues of the same function at a time, in order to optimize
the queue reset process.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 43f8b933
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43f8b9333d86d4e3a42e55a6e41c78c249ac0216

----------------------------------------------------------------------

Vmdq is not supported yet, the num_vmdq_vport is always 0,
it's a bit confusing when using the num_vport, so remove
these unused codes of vmdq.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 67b0e142
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=67b0e1428e2f592c0fc2c7f682a5a049158782b8

----------------------------------------------------------------------

For DEVICE_VERSION_V3, the hardware supports to match specified
data in the specified offset of packet payload. Each layer can
have one offset, and can't be masked when configure flow director
rule by ethtool command. The layer is selected based on the
flow-type, ether for L2, ip4/ipv6 for L3, and tcp4/tcp6/udp4/udp6
for L4. For example, tcp4/tcp6/udp4/udp6 rules share the same
user-def offset, but each rule can have its own user-def value.

For the user-def field of ethtool -N/U command is 64 bits long.
The bit 0~15 is used for user-def value, and bit 32~47 for user-def
offset in HNS3 driver.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit b47cfe1f
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b47cfe1f402dbf10279b8f12131388fdff9d2259

----------------------------------------------------------------------

If the imp-controlled PHYs feature is enabled, driver can not
call phy driver interface to set loopback anymore and needs
to send command to firmware to start phy loopback.

Driver reuses the existing firmware command 0x0315 to start
phy loopback, just add a setting bit in this command. As this
command is not only for serdes loopback anymore, rename this
command to "xxx_COMMON_LOOPBACK", and modify function name,
macro name and logs related to it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 024712f5
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=024712f51e5711d69ced729fb3398819ed6e8b53

----------------------------------------------------------------------

When the imp-controlled PHYs feature is enabled, driver will not
register mdio bus. In order to support ioctl ops for phy tool to
read or write phy register in this case, the firmware implement
a new command for driver and driver implement ioctl by using this
new command.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit f5f2b3e4
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5f2b3e4dcc0e944dc33b522df84576679fbd8eb

----------------------------------------------------------------------

IMP(Intelligent Management Processor) firmware add a new feature
to take control of PHYs for some new devices, PF driver adds
support for this feature.

Driver queries device's capability to check whether IMP supports
this feature, it will tell IMP to enable this feature by firmware
compatible command if it is supported.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit e8194f32
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e8194f3262055bc2e6e2b7c02f9de2c3d2ef7fc9

----------------------------------------------------------------------

For maintainability and compatibility, add support to use pause
capability queried from firmware, and add debugfs support to dump
this capability.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 433ccce8
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=433ccce83504a44d8e07ac2c5282ed24095af602

----------------------------------------------------------------------

For maintainability and compatibility, add support to use FEC
capability queried from firmware.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 9393eb50
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9393eb5034a040931120f9c6eed9bf0e78029192

----------------------------------------------------------------------

In macro definitions, parentheses are unnecessary in some cases,
such as the calling parameter of a function, the left variable
of the equal sign, and so on. So remove these unnecessary
parentheses according to these rules.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 3f094bd1
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3f094bd11a3720d2a00e9b6dfc53f1ab25884a49

----------------------------------------------------------------------

The max qset number is a fixed value now and it is defined by a macro.
In order to support other value in different kinds of device, it is
better to use specification queried from firmware to replace macro.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit e070c8b9
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e070c8b91ac1c7810c8448b1e5534d1895a0c7f4

----------------------------------------------------------------------

Since the newer hardware may supports different frame size,
so add support to obtain the capability from the firmware
instead of the fixed value.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 1cef42c8
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1cef42c8474f22d6a8509a19c0b578e5f60138d9

----------------------------------------------------------------------

To improve the compatibility of firmware for driver, help firmware
to deal with different api commands, add api capability bits when
initialize the command queue.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 2bbad0aa
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2bbad0aa40e172e7ed7aba6f6ad4d9977dbd0be3

----------------------------------------------------------------------

Add some interfaces to get information of tm priority and qset,
then they can be used by debugfs.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit cdab7c97
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cdab7c9779709755de90b9d017df2682f797e2bb

----------------------------------------------------------------------

For the max rss size of PF may be up to 512, the max queue
number of single tc may be up to 512 too. For the total queue
numbers may be up to 1280, so the queue offset of each tc may
be more than 1024. So adjust the rss tc mode configuration
command, including extend tc size field from 10 bits to 11
bits, and extend tc size field from 3 bits to 4 bits.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 8eeb1f4b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8eeb1f4bce68e91dea52d1832b89fed3a984cb58

----------------------------------------------------------------------

For the max rss size of PF may be up to 512, so adjust the
command of configuring rss indirection table to support
queue id larger than 255. The width of queue id is extended
from 8 bits to 10 bits. The high 2 bits are stored in filed
rss_qid_h when the queue id is larger than 255.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit f1c2e66d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1c2e66d7f38cb1e919bd594af4ad4a9ae8344cc

----------------------------------------------------------------------

Currently, the driver gets the max rss size from configuration
file when initialization. Both the PF and VF share the same
max rss size, and no more than 128.

For DEVICE_VERSION_V3, the max rss size for PF can be up to
512, so there is a new field in configuration file to store it,
the old filed is used for VF.

To be compatible with boards using old configure file, the PF
will use the old filed if the one is zero.

For the rss size may be larger than 256, so the type of
rss_indirection_tbl of struct hclge_vport should be changed to
u16 as well.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 0f993fe2
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0f993fe2b89db2342833856cc0597a309f278e55

----------------------------------------------------------------------

For some new device, it supports forwarding packet to queues
of specified TC when flow director rule hit. So extend the
command handle to support it.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 592b0179
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=592b0179cd498641ae45b9ad4276f5038230f7aa

----------------------------------------------------------------------

For DEVICE_VERSION_V2, the hardware only supports max two layer
VLAN tags, including port based tag inserted by hardware, tag in
tx buffer descriptor(get from skb->tci) and tag in packet.

For transmit packet:
If port based VLAN disabled, and vf driver gets a VLAN tag from
skb, the VLAN tag must be filled to the Outer_VLAN_TAG field
(tag near to DMAC) of tx buffer descriptor, otherwise it may
be inserted after the tag in packet.

If port based VLAN enabled, and vf driver gets a VLAN tag from
skb, the VLAN tag must be filled to the VLAN_TAG field (tag
far to DMAC) of tx buffer descriptor, otherwise it may be
conflicted with port based VLAN, and raise a hardware error.

For receive packet:
The hardware will strip the VLAN tags and fill them in the rx
buffer descriptor, no matter port based VLAN enable or not.
Because port based VLAN tag is useless for stack, so vf driver
needs to discard the port based VLAN tag get from rx buffer
descriptor when port based VLAN enabled.

So vf must know about the port based VLAN state.

For DEVICE_VERSION_V3, the hardware provides some new
configuration to improve it.

For transmit packet:
When enable tag shift mode, hardware will handle the VLAN tag
in outer_VLAN_TAG field as VLAN_TAG, so it won't conflict with
port based VLAN. And hardware also make sure the tag before
the tag in packet. So vf driver doesn't need to specify the tag
position according to the port based VLAN state anymore.

For receive packet:
When enable discard mode, hardware will strip and discard the
port based VLAN tag, so vf driver doesn't need to identify it
from rx buffer descriptor.

So modify the port based VLAN configuration, simplify the process
for vf handling the VLAN tag.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit c43abe1a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c43abe1a5f83d3afe39f9aea99edfd594add705c

----------------------------------------------------------------------

For DEVICE_VERSION_V2, the hardware supports enable tx and rx
promiscuous separately. But tx or rx promiscuous is active for
unicast, multicast and broadcast promiscuous simultaneously.
To support traffics between functions belong to the same port,
we always enable tx promiscuous for broadcast promiscuous, so
tx promiscuous for unicast and multicast promiscuous is also
enabled.

For DEVICE_VERSION_V3, the hardware decouples the above
relationship. Tx unicast promiscuous, rx unicast promiscuous,
tx multicast promiscuous, rx multicast promiscuous, tx broadcast
promiscuous and rx broadcast promiscuous can be enabled separately.

So add support for the new promiscuous command.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 3e281621
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3e2816219d7ccae4ab4b5ed480566e05aef9cf1a

----------------------------------------------------------------------

For the device who has the capability to handle udp tunnel
checksum segmentation, add support for it.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 66d52f3b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=66d52f3bf385c8d969e9ca6b281ddf773c9691d7

----------------------------------------------------------------------

For the device that supports TX hardware checksum, the hardware
can calculate the checksum from the start and fill the checksum
to the offset position, which reduces the operations of
calculating the type and header length of L3/L4. So add this
feature for the HNS3 ethernet driver.

The previous simple BD description is unsuitable, rename it as
HW TX CSUM.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 3a6863e4
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3a6863e4e8ee212c7f86594299d9ff0d6a15ecbc

----------------------------------------------------------------------

For HNAE3_DEVICE_VERSION_V3, a maximum of 1281 interrupt
resources are supported. To utilize these new resources,
extend the corresponding field or variable to 16bit type,
and remove the restriction of NIC client that only use a
maximum of 65 interrupt vectors. In addition, the I/O address
of the extended interrupt resources are different, so an extra
handler is needed.

Currently, the total number of interrupts is the sum of RoCE's
number and RoCE's offset (RoCE is in front of NIC), since
the number of both NIC and RoCE are same. For readability,
rewrite the corresponding field of the command, rename the
RoCE's offset field as the number of NIC interrupts, then
the total number of interrupts is sum of the number of RoCE
and NIC, and replace vport->back with hdev in
hclge_init_roce_base_info() for simplifying the code.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 9a5ef4aa
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9a5ef4aa5457ceab3ad9772fa7360b34192f9463

----------------------------------------------------------------------

For DEVICE_VERSION_V1/2, there are total 1024 queues and
queue sets. For DEVICE_VERSION_V3, it increases to 1280,
and can be assigned to one pf， so remove the limitation
of 1024.

To keep compatible with DEVICE_VERSION_V1/2 and old driver
version, the queue number is split into two part:
tqp_num(range 0~1023) and ext_tqp_num(range 1024~1279).
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit ab16b49c
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ab16b49cdf986172373afc16b4039f058aa3b22d

----------------------------------------------------------------------

For maintainability and compatibility, add support for querying
the maximum value of GL.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 13e312dca2f2ebefea23d5385ffa54d7d1b03ecc
bugzilla: 51348

--------------------------------

[ Upstream commit ae85ddda ]

Currently, some bit filed definitions of flow director TCAM
configuration command are incorrect. Since the wrong MSB is
always 0, and these fields are assgined in order, so it still works.

Fix it by redefine them.

Fixes: 11732868 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

The max tm rate is a fixed value(100Gb/s) now as it is defined by a
macro. In order to support other rates in different kinds of device,
it is better to use specification queried from firmware to replace
this macro.

As function hclge_shaper_para_calc() has too many arguments to add
more, so encapsulate its three arguments ir_b, ir_u, ir_s into a
structure.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To improve code maintainability and compatibility, new commands
HCLGE_OPC_QUERY_DEV_SPECS for PF and HCLGEVF_OPC_QUERY_DEV_SPECS
for VF are introduced to query device specifications, instead of
statically defining specifications by checking the hardware version
or other methods.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to improve code maintainability and compatibility, the
capabilities of new features are queried from firmware.

The member flag in struct hnae3_ae_dev indicates not only
capabilities, but some initialized status. As capabilities bits
queried from firmware is too many, it is better to use new member
to indicate them. So adds member capabs in struce hnae3_ae_dev.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to improve code maintainability and compatibility,
add support to query the device capability by expanding the
existing version query command. The device capability refers
to the features supported by the device.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To better identify the device version, struct hnae3_handle adds a
member dev_version to replace pci revision. The dev_version consists
of hardware version and PCI revision. The hardware version is queried
from firmware by an existing firmware version query command.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 200G device has a new device id 0xA228, so adds this device id to
pci table, then the driver can probe it.

As speed_ability queried from firmware has only 8 bits and already be
used up, so firmware adds extra speed_ability_ext to indicate more
speed abilities to support 200G and driver needs to parse it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modify field .gro_en in struct hclge_cfg_gro_status_cmd to u8
according to the UM, otherwise, it will overwrite the reserved
byte which may be used for other purpose.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the UM, command 0x0B03 and 0x0B13 are used to
query the statistics about TX and RX, not the status, so
modifies the unsuitable macro name of these two command.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch adds support for reading the optical module eeprom
info via "ethtool -m".
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct hclge_mac_vlan_remove_cmd and hclge_mac_vlan_add_cmd are unused.
So removes them from hclge_cmd.h.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>