net: hns3: adds support for reading module eeprom info

This patch adds support for reading the optical module eeprom
info via "ethtool -m".
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -374,6 +374,8 @@ struct hnae3_ae_dev {
  *   Set the max tx rate of specified vf.
  * set_vf_mac
  *   Configure the default MAC for specified VF
+ * get_module_eeprom
+ *   Get the optical module eeprom info.
  */
 struct hnae3_ae_ops {
 	int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -548,6 +550,8 @@ struct hnae3_ae_ops {
 	int (*set_vf_rate)(struct hnae3_handle *handle, int vf,
 			   int min_tx_rate, int max_tx_rate, bool force);
 	int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p);
+	int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset,
+				 u32 len, u8 *data);
 };
 
 struct hnae3_dcb_ops {

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -4,6 +4,7 @@
 #include <linux/etherdevice.h>
 #include <linux/string.h>
 #include <linux/phy.h>
+#include <linux/sfp.h>
 
 #include "hns3_enet.h"
 
@@ -12,6 +13,11 @@ struct hns3_stats {
 	int stats_offset;
 };
 
+struct hns3_sfp_type {
+	u8 type;
+	u8 ext_type;
+};
+
 /* tqp related stats */
 #define HNS3_TQP_STAT(_string, _member)	{			\
 	.stats_string = _string,				\
@@ -1386,6 +1392,73 @@ static int hns3_set_fecparam(struct net_device *netdev,
 	return ops->set_fec(handle, fec_mode);
 }
 
+static int hns3_get_module_info(struct net_device *netdev,
+				struct ethtool_modinfo *modinfo)
+{
+#define HNS3_SFF_8636_V1_3 0x03
+
+	struct hnae3_handle *handle = hns3_get_handle(netdev);
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+	struct hns3_sfp_type sfp_type;
+	int ret;
+
+	if (handle->pdev->revision == 0x20 || !ops->get_module_eeprom)
+		return -EOPNOTSUPP;
+
+	memset(&sfp_type, 0, sizeof(sfp_type));
+	ret = ops->get_module_eeprom(handle, 0, sizeof(sfp_type) / sizeof(u8),
+				     (u8 *)&sfp_type);
+	if (ret)
+		return ret;
+
+	switch (sfp_type.type) {
+	case SFF8024_ID_SFP:
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		break;
+	case SFF8024_ID_QSFP_8438:
+		modinfo->type = ETH_MODULE_SFF_8436;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		break;
+	case SFF8024_ID_QSFP_8436_8636:
+		if (sfp_type.ext_type < HNS3_SFF_8636_V1_3) {
+			modinfo->type = ETH_MODULE_SFF_8436;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		} else {
+			modinfo->type = ETH_MODULE_SFF_8636;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+		}
+		break;
+	case SFF8024_ID_QSFP28_8636:
+		modinfo->type = ETH_MODULE_SFF_8636;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+		break;
+	default:
+		netdev_err(netdev, "Optical module unknown: %#x\n",
+			   sfp_type.type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hns3_get_module_eeprom(struct net_device *netdev,
+				  struct ethtool_eeprom *ee, u8 *data)
+{
+	struct hnae3_handle *handle = hns3_get_handle(netdev);
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+
+	if (handle->pdev->revision == 0x20 || !ops->get_module_eeprom)
+		return -EOPNOTSUPP;
+
+	if (!ee->len)
+		return -EINVAL;
+
+	memset(data, 0, ee->len);
+
+	return ops->get_module_eeprom(handle, ee->offset, ee->len, data);
+}
+
 #define HNS3_ETHTOOL_COALESCE	(ETHTOOL_COALESCE_USECS |		\
 				 ETHTOOL_COALESCE_USE_ADAPTIVE |	\
 				 ETHTOOL_COALESCE_RX_USECS_HIGH |	\
@@ -1449,6 +1522,8 @@ static const struct ethtool_ops hns3_ethtool_ops = {
 	.set_msglevel = hns3_set_msglevel,
 	.get_fecparam = hns3_get_fecparam,
 	.set_fecparam = hns3_set_fecparam,
+	.get_module_info = hns3_get_module_info,
+	.get_module_eeprom = hns3_get_module_eeprom,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h

@@ -270,6 +270,8 @@ enum hclge_opcode_type {
 	HCLGE_OPC_M7_COMPAT_CFG		= 0x701A,
 
 	/* SFP command */
+	HCLGE_OPC_GET_SFP_EEPROM	= 0x7100,
+	HCLGE_OPC_GET_SFP_EXIST		= 0x7101,
 	HCLGE_OPC_GET_SFP_INFO		= 0x7104,
 
 	/* Error INT commands */
@@ -1054,6 +1056,19 @@ struct hclge_firmware_compat_cmd {
 	u8 rsv[20];
 };
 
+#define HCLGE_SFP_INFO_CMD_NUM	6
+#define HCLGE_SFP_INFO_BD0_LEN	20
+#define HCLGE_SFP_INFO_BDX_LEN	24
+#define HCLGE_SFP_INFO_MAX_LEN \
+	(HCLGE_SFP_INFO_BD0_LEN + \
+	(HCLGE_SFP_INFO_CMD_NUM - 1) * HCLGE_SFP_INFO_BDX_LEN)
+
+struct hclge_sfp_info_bd0_cmd {
+	__le16 offset;
+	__le16 read_len;
+	u8 data[HCLGE_SFP_INFO_BD0_LEN];
+};
+
 int hclge_cmd_init(struct hclge_dev *hdev);
 static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
 {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -11119,6 +11119,107 @@ static void hclge_sync_promisc_mode(struct hclge_dev *hdev)
 	}
 }
 
+static bool hclge_module_existed(struct hclge_dev *hdev)
+{
+	struct hclge_desc desc;
+	u32 existed;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_GET_SFP_EXIST, true);
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to get SFP exist state, ret = %d\n", ret);
+		return false;
+	}
+
+	existed = le32_to_cpu(desc.data[0]);
+
+	return existed != 0;
+}
+
+/* need 6 bds(total 140 bytes) in one reading
+ * return the number of bytes actually read, 0 means read failed.
+ */
+static u16 hclge_get_sfp_eeprom_info(struct hclge_dev *hdev, u32 offset,
+				     u32 len, u8 *data)
+{
+	struct hclge_desc desc[HCLGE_SFP_INFO_CMD_NUM];
+	struct hclge_sfp_info_bd0_cmd *sfp_info_bd0;
+	u16 read_len;
+	u16 copy_len;
+	int ret;
+	int i;
+
+	/* setup all 6 bds to read module eeprom info. */
+	for (i = 0; i < HCLGE_SFP_INFO_CMD_NUM; i++) {
+		hclge_cmd_setup_basic_desc(&desc[i], HCLGE_OPC_GET_SFP_EEPROM,
+					   true);
+
+		/* bd0~bd4 need next flag */
+		if (i < HCLGE_SFP_INFO_CMD_NUM - 1)
+			desc[i].flag |= cpu_to_le16(HCLGE_CMD_FLAG_NEXT);
+	}
+
+	/* setup bd0, this bd contains offset and read length. */
+	sfp_info_bd0 = (struct hclge_sfp_info_bd0_cmd *)desc[0].data;
+	sfp_info_bd0->offset = cpu_to_le16((u16)offset);
+	read_len = min_t(u16, len, HCLGE_SFP_INFO_MAX_LEN);
+	sfp_info_bd0->read_len = cpu_to_le16(read_len);
+
+	ret = hclge_cmd_send(&hdev->hw, desc, i);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to get SFP eeprom info, ret = %d\n", ret);
+		return 0;
+	}
+
+	/* copy sfp info from bd0 to out buffer. */
+	copy_len = min_t(u16, len, HCLGE_SFP_INFO_BD0_LEN);
+	memcpy(data, sfp_info_bd0->data, copy_len);
+	read_len = copy_len;
+
+	/* copy sfp info from bd1~bd5 to out buffer if needed. */
+	for (i = 1; i < HCLGE_SFP_INFO_CMD_NUM; i++) {
+		if (read_len >= len)
+			return read_len;
+
+		copy_len = min_t(u16, len - read_len, HCLGE_SFP_INFO_BDX_LEN);
+		memcpy(data + read_len, desc[i].data, copy_len);
+		read_len += copy_len;
+	}
+
+	return read_len;
+}
+
+static int hclge_get_module_eeprom(struct hnae3_handle *handle, u32 offset,
+				   u32 len, u8 *data)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	u32 read_len = 0;
+	u16 data_len;
+
+	if (hdev->hw.mac.media_type != HNAE3_MEDIA_TYPE_FIBER)
+		return -EOPNOTSUPP;
+
+	if (!hclge_module_existed(hdev))
+		return -ENXIO;
+
+	while (read_len < len) {
+		data_len = hclge_get_sfp_eeprom_info(hdev,
+						     offset + read_len,
+						     len - read_len,
+						     data + read_len);
+		if (!data_len)
+			return -EIO;
+
+		read_len += data_len;
+	}
+
+	return 0;
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -11211,6 +11312,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.set_vf_trust = hclge_set_vf_trust,
 	.set_vf_rate = hclge_set_vf_rate,
 	.set_vf_mac = hclge_set_vf_mac,
+	.get_module_eeprom = hclge_get_module_eeprom,
 };
 
 static struct hnae3_ae_algo ae_algo = {