As the HNS3 driver doesn't update the MAC address directly in
function hns3_set_rx_mode() now, it can't know whether the
MAC table is full from __dev_uc_sync() and __dev_mc_sync(),
so it's senseless to handle the overflow promisc here.

This patch removes the handle of overflow promisc from function
hns3_set_rx_mode(), and updates the promisc mode in the service
task.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for dumping entries of UC and MC MAC list,
which help checking whether a MAC address being added into hardware
or not.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the HNS3 driver sync and unsync MAC address in function
hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly
in the path of dev_set_rx_mode(). If failed, it won't retry until
next calling of hns3_set_rx_mode(). On the other hand, if request
add and remove a same address many times at a short interval, each
request must be done one by one, can't be merged. For VF, it sends
mailbox messages to PF to request adding or deleting MAC address in
the path of function hns3_set_rx_mode(), no matter the address is
configured success.

This patch refines it by recording the MAC address in function
hns3_set_rx_mode(), and updating MAC address in the service task.
If failed, it will retry by the next calling of periodical service
task. It also uses some state to mark the state of each MAC address
in the MAC list, which can help merge configure request for a same
address. With these changes, when global reset or IMP reset occurs,
we can restore the MAC table with the MAC list.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the calculation elsewhere, replaces num_req_vfs with
num_alloc_vport in hclge_reset_umv_space().
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since hclge_set_umv_space() is only called by hclge_init_umv_space(),
so parameter 'is_alloc' is redundant.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, firmware helps manage the unicast MAC VLAN table
space for each PF. PF just needs to tell firmware its wanted
space when initializing, and unnecessary to free it when
un-intializing. So this patch removes the umv space free handle,
and removes the forward statement of hclge_set_umv_space()
by defining hclge_init_umv_space() after it.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use globally defined kernel version instead of custom driver variant.
Reported-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds trace event support for PF/VF mailbox.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for dumping MAC reg in debugfs,
which will be helpful for debugging.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds some debug information for failures of processing flow table,
removes the redundant printing when hclge_fd_check_spec() returns
error, and modifies the printing level for FD not enable error.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes some unnecessary blank lines, redundant
parentheses, and changes one tab to blank in
hclge_dbg_dump_reg_common().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In hclge_set_fd_key_config(), parameter 'stage' should be
as enum HCLGE_FD_STAGE, and in hclge_config_key(), 'tuple_size'
should be type u8, also simplify unsigned int with u32 for 'i'.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct hclge_mac_vlan_remove_cmd and hclge_mac_vlan_add_cmd are unused.
So removes them from hclge_cmd.h.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

proto_support field in struct hclge_fd_cfg shows what protocols
in flow direct table are supported now. It is unnecessary since
checking which one is unsupported will be more efficient,
so this patch removes it.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since case default has included case 0, so removes this
redundant case 0.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hclge_get_fd_rule_info() is bloated, this patch separates
it into several standalone functions for readability and
maintainability.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For readability and maintainability, this patch separates the
handling part of each flow type in hclge_fd_check_ether_tuple()
into standalone functions.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When device is not open, the service task which update the port
information per second is not running. In this case, the port
capabilities, including speed ability, autoneg ability, media type,
may be incorrect. Then get/set link ksetting may fail.

This patch fixes it by updating the port information before getting/
setting link ksettings when device is not open, and start timer
task immediately by setting delay time to 0 when device opens.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, VF's RSS configuration would be set to default
after VF reset, the the user's one will loss.

To fix it, this patch separates hclgevf_rss_init_hw() into
two parts, one sets up the default RSS configuration and
just be called when driver loading, one configures the hardware
and be called by driver loading or reset.

Fixes: d97b3072 ("net: hns3: Add RSS tuples support for VF")
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the fraglist SKB headlen is larger than zero, current code
still handle the fraglist SKB linear data as frag data, which may
cause TX error.

This patch adds a new DESC_TYPE_FRAGLIST_SKB type to handle the
mapping and unmapping of the fraglist SKB linear data buffer.

Fixes: 8ae10cfb ("net: hns3: support tx-scatter-gather-fraglist feature")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag
in order to guarantee forward progress, which may cause hns3'
WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ
warning:

[11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished.
[11246.209979] hns3 0000:bd:00.1 eth7: net open
[11246.227608] ------------[ cut here ]------------
[11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140
[11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2]
[11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G           O      5.4.0-rc4+ #1
[11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019
[11246.344802] Workqueue: hclge hclge_service_task [hclge]
[11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO)
[11246.354779] pc : check_flush_dependency+0xcc/0x140
[11246.359549] lr : check_flush_dependency+0xcc/0x140
[11246.364317] sp : ffff800268a73990
[11246.367618] x29: ffff800268a73990 x28: 0000000000000001
[11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000
[11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868
[11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600
[11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800
[11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948
[11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002
[11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65
[11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672
[11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d
[11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e
[11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145
[11246.431068] x5 : 0000000000000000 x4 : 0000000000000000
[11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff
[11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000
[11246.446928] Call trace:
[11246.449363]  check_flush_dependency+0xcc/0x140
[11246.453785]  flush_workqueue+0x110/0x410
[11246.457691]  ib_cache_cleanup_one+0x54/0x468
[11246.461943]  __ib_unregister_device+0x70/0xa8
[11246.466279]  ib_unregister_device+0x2c/0x40
[11246.470455]  hns_roce_exit+0x34/0x198 [hns_roce_hw_v2]
[11246.475571]  __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2]
[11246.482934]  hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2]
[11246.489261]  hclge_notify_roce_client+0x84/0xe0 [hclge]
[11246.494464]  hclge_reset_rebuild+0x60/0x730 [hclge]
[11246.499320]  hclge_reset_service_task+0x400/0x5a0 [hclge]
[11246.504695]  hclge_service_task+0x54/0x698 [hclge]
[11246.509464]  process_one_work+0x15c/0x458
[11246.513454]  worker_thread+0x144/0x520
[11246.517186]  kthread+0xfc/0x128
[11246.520314]  ret_from_fork+0x10/0x18
[11246.523873] ---[ end trace eb980723699c2585 ]---
[11246.528710] hns3 0000:bd:00.2: Func clear success after reset.
[11246.528747] hns3 0000:bd:00.0: Func clear success after reset.
[11246.907710] hns3 0000:bd:00.1 eth7: link up

According to [1] and [2]:

There seems to be no specific guidance about how to handling the
forward progress guarantee of network device's WQ yet, and other
network device's WQ seem to be marked with WQ_MEM_RECLAIM without
a clear reason.

So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ
to aviod the above warning.

1. https://www.spinics.net/lists/netdev/msg631646.html
2. https://www.spinics.net/lists/netdev/msg632097.html

Fixes: 0ea68902 ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, PF responds to VF depending on what mailbox it is
handling, it is a bit inflexible. The correct way is, PF should
check the mbx_need_resp field to decide whether gives response
to VF.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For making the code more readable, this adds several new
structure to replace the msg field in structure
hclge_mbx_vf_to_pf_cmd and hclge_mbx_pf_to_vf_cmd.
Also uses macro to instead of some magic number.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, when mailbox handling fails, the PF driver
just responds 1 to the VF driver. It is not sufficient
for the VF driver to find out why its mailbox fails.

So the error should be responded to VF, but the error
is type int and the response field in struct
hclge_mbx_pf_to_vf_cmd is type u16, a conversion is
needed.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, PF missed to clear the port base VLAN for VF when
unload. In this case, the VLAN id will remain in the VLAN
table. This patch fixes it.

Fixes: 92f11ea1 ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the user manual, the ingress and egress VLAN filter
are configured at the same time. Currently, hclge_init_vlan_config()
and hclge_set_vlan_spoofchk() will both change the VLAN filter
switch. So it's necessary to read the old configuration before
modifying it.

Fixes: 22044f95 ("net: hns3: add support for spoof check setting")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if VF is loaded on the host side, the host doesn't
clear the VF's VLAN table entries when VF removing. In this
case, when doing reset and disabling sriov at the same time the
VLAN device over VF will be removed, but the VLAN table entries
in hardware are remained.

This patch fixes it by asking PF to clear the VLAN table entries for
VF when VF is removing. It also clears the VLAN table full bit
after VF VLAN table entries being cleared.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The HNS3 driver supports to configure TC numbers and TC to priority
map via "tc" tool. But when delete the rule, will fail, because
the HNS3 driver needs at least one TC, but the "tc" tool sets TC
number to zero when delete.

This patch makes sure that the TC number is at least one.

Fixes: 30d240df ("net: hns3: Add mqprio hardware offload support in hns3 driver")
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since kernel already has logs after kzalloc fails,
it's unnecessary to print duplicate logs. So this
patch deletes these logs.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch modifies some printing relating to reset issue.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a local variable to save the command code in
some dump cases which need to modify the command code, then
the failing command code can be print out for debugging.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When setting VF's MAC from PF, if the VF driver not loaded, the
firmware will return error to PF.

So PF should check whether VF is alive before sending message to
VF when setting VF's MAC.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(),
variable req had been set as "0" by memset(), so it's unnecessary
to set .entry_type field as "0" with hnae3_set_bit() again.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In hclge_handle_hw_ras_error(), it is unnecessary to check
HCLGE_STATE_RST_HANDLING flag, because the reset priority
has been ensured by the process itself.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate,
this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up some incorrect type in assignment reported by sparse
and compiler.
The warning as below:
- warning : restricted __le16 degrades to integer
- warning : cast from restricted __le32
- warning : cast from restricted __be32
- warning : cast from restricted __be16
and "mixed operation".
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When fibre port supports auto-negotiation, the IMP(Intelligent
Management Process) processes the speed of auto-negotiation
and the  user's speed separately.
For below case, the port will get a not link up problem.
step 1: disables auto-negotiation and sets speed to A, then
the driver's MAC speed will be updated to A.
step 2: enables auto-negotiation and MAC gets negotiated
speed B, then the driver's MAC speed will be updated to B
through querying in periodical task.
step 3: MAC gets new negotiated speed A.
step 4: disables auto-negotiation and sets speed to B before
periodical task query new MAC speed A, the driver will  ignore
the speed configuration.

This patch fixes it by skipping speed and duplex checking when
fibre port supports auto-negotiation.

Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pointer 'client' is being initialized with a value that is never
read, it is being updated later on. The initialization is redundant
and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>