Create a file structure which was used to save the memory address and
hisi_hba pointer for REGS at debugfs. This structure is bound to the
corresponding debugfs file, it can help callback function of debugfs file
to get what it need.

Link: https://lore.kernel.org/r/1571926105-74636-9-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address and DQ
pointer for DQ at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.

Link: https://lore.kernel.org/r/1571926105-74636-8-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address and CQ
pointer for CQ at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.

Link: https://lore.kernel.org/r/1571926105-74636-7-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It's useful to know when the dump occurred, so add a timestamp file for
this.

Link: https://lore.kernel.org/r/1571926105-74636-6-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:

BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...

To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.

Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When injecting 2bit ecc errors, it will cause confusion inside SAS
controller which needs host reset to recover it. If a device is gone at the
same times inject 2bit ecc errors, we may not receive the ITCT interrupt so
it will wait for completion in clear_itct_v3_hw() all the time. And host
reset will also not occur because it can't require hisi_hba->sem, so the
system will be suspended.

To solve the issue, use wait_for_completion_timeout() instead of
wait_for_completion(), and also don't mark the gone device as
SAS_PHY_UNUSED when device gone.

Link: https://lore.kernel.org/r/1571926105-74636-4-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If set the BIST init value after enabling BIST, there may be still some few
error bits. According to the process, need to set the BIST init value
before enabling BIST.

Fixes: 97b151e7 ("scsi: hisi_sas: Add BIST support for phy loopback")
Link: https://lore.kernel.org/r/1571926105-74636-3-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Due to a merge error, we attempt to create 2x debugfs dump folders, which
fails:
[  861.101914] debugfs: Directory 'dump' with parent '0000:74:02.0'
already present!

This breaks the dump function.

To fix, remove the superfluous attempt to create the folder.

Fixes: 7ec7082c ("scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation")
Link: https://lore.kernel.org/r/1571926105-74636-2-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix misspellings of "disonnect", "reconnect", "connection", "connected",
and "disconnection".

Link: https://lore.kernel.org/r/20191024152633.30404-1-geert+renesas@glider.beSigned-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix misspelling of "configuration".

Link: https://lore.kernel.org/r/20191024152543.30310-1-geert+renesas@glider.beSigned-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

From an interrupt handler path memory may be allocated using
GFP_KERNEL, replace it with GFP_ATOMIC.
_base_interrupt->_scsih_io_done->_scsih_smart_predicted_fault

Link: https://lore.kernel.org/r/20191024152835.6177-1-thenzl@redhat.comSigned-off-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This error path is missing an unlock.

Fixes: 26780d9e ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
Link: https://lore.kernel.org/r/20191022102324.GA27540@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:2076:15:
 warning: variable ppmax set but not used [-Wunused-but-set-variable]
drivers/target/iscsi/cxgbit/cxgbit_ddp.c:300:15:
 warning: variable ppmax set but not used [-Wunused-but-set-variable]

It is not used since commit a248384e ("cxgb4/libcxgb/cxgb4i/cxgbit:
enable eDRAM page pods for iSCSI")

Link: https://lore.kernel.org/r/20191021142042.30964-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Replace assignment of 0 to pointer with NULL assignment.

Link: https://lore.kernel.org/r/20191024030857.GA12097@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Replace assignment of 0 to pointer with NULL assignment.

Link: https://lore.kernel.org/r/20191024025726.GA31421@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update lpfc version to 12.6.0.0

Link: https://lore.kernel.org/r/20191018211832.7917-17-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When debugging a recent discovery customer problem it was very hard to tell
what was happening with the existing discovery log messages. To fully debug
the issue additional log messages were necessary.

Add or extend log messages so that sufficient information is present for
debugging.

Link: https://lore.kernel.org/r/20191018211832.7917-16-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In the past, the lpe32000 models, based their main support being for 32G,
and as FC-AL is not supported in the FC standards past 8G, did not support
FC-AL operation.

This patch adds private-loop FC-AL support for the LPE32000 adapters
when a link is 8G or below. To avoid conditions where link rate may
change, which would cause non-connectivity to the AL device, FC-AL
mode must become a persistent setting and the link kept at a speed
supporting FC-AL.

The patch:

 - Adds a pls attribute indicating whether the adapter properly supports
   FC-AL.

 - Adds support for the adapter to indicate that topology should be fixed
   and the topology types to be configured.

 - Adds a pt attribute to report the persistent topology if present.

Link: https://lore.kernel.org/r/20191018211832.7917-15-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add decode support for adapter Async Events which report FA-WWN
configuration errors.

Link: https://lore.kernel.org/r/20191018211832.7917-14-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add two new macros to aid in message logging:

Both macros print a message if the corresponding lpfc verbosity setting is
set or the kernel log level is WARNING or more critical.

One macro is for use with a phba structure, the other with a vport
structure.

[mkp: typo]

Link: https://lore.kernel.org/r/20191018211832.7917-13-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, the FW logging facility is a load/boot time parameter which
requires the driver to be unloaded/reloaded or the system rebooted in order
to change its configuration.

Convert the logging facility to allow dynamic enablement and configuration.
Specifically:

 - Convert the feature so that it can be enabled dynamically via an
   attribute.  Additionally, the size of the buffer can be configured
   dynamically.

 - Add locks around states that now may be changing.

 - Tie the feature into debugfs so that the logs can be read at any time.

Link: https://lore.kernel.org/r/20191018211832.7917-12-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The existing "auto eq delay" mechanism was sometimes skipping over an EQ,
not ramping the coalescing down under light load fast enough, and in other
cases never kicked in as cpu sharing by multiple vectors didn't quite add
up right.

Tweak the interrupt mechanism such that:

 - Add a flag to the EQ to force checking for colaescing values when being
   serviced in the interrupt handler.  The flag will be set by any CQ bound
   to the EQ whenever the number of CQ elements process in a single scan
   meets or exceeds the hardware queue notify level. E.g. there's a
   significant number of completions happening.

 - In the heartbeat work item that checks coalescing:

   - Replace the structure that was counting the number of EQs that
     interrupted on a single cpu with a new structure that looks at the EQ
     to see whether EQ currently has a coalescing value (thus it should be
     re-evaluate) or was marked by the new flag indicating heavy
     completions.

   - When a cpu, which may be servicing multiple vectors, had at least 1 EQ
     that should be checked, a new coalescing delay is calculated based on
     the number of interrupts that occurred on the cpu.

   - The new coalescing value is then applied to the EQs that had
     interrupted on the cpu.

Link: https://lore.kernel.org/r/20191018211832.7917-11-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Lower IOps performance with write operations. Perf tool shows lock
contention in dma_pool_alloc and dma_pool_free related to the
txrdy_payload_pool.

The allocations are for dma buffers for XFER_RDY's, which actually are not
needed for the FCP_TRECEIVE command as the command contents are used by the
adapter to generate the IU.

Remove the allocations and the associated buffer pool.  Rather than leaving
NULLs in buffer pointer locations, set command and sgl to indicate skipped
SGLE indexes.

Link: https://lore.kernel.org/r/20191018211832.7917-10-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Slightly rework some error check code paths for better streamlining.

Added compiler unlikely hints to allow slightly better optimization of the
fast-path.

Removed a few pointer checks that were obviously already valid.

Link: https://lore.kernel.org/r/20191018211832.7917-9-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Log message conditional upon vport being NULL dereferences vport to
determine log verbose setting.

Changed to use lpfc_print_log which uses phba to determine the active log
verbose setting.

Fixes: 43bfea1b ("scsi: lpfc: Fix coverity errors on NULL pointer checks")
Link: https://lore.kernel.org/r/20191018211832.7917-8-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In lpfc_abort_handler, the lock acquire order is hbalock (irqsave),
buf_lock (irq) and ring_lock (irq).  The issue is that in two places the
locks are released out of order - the buf_lock and the hbalock - resulting
in the cpu preemption/lock flags getting restored out of order and
deadlocking the cpu.

Fix the unlock order by fully releasing the hbalocks as well.

CC: Zhangguanghui <zhang.guanghui@h3c.com>
Link: https://lore.kernel.org/r/20191018211832.7917-7-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In cases where I/O may be aborted, such as driver unload or link bounces,
the system will crash based on a bad ndlp pointer.

Example:
  RIP: 0010:lpfc_sli4_abts_err_handler+0x15/0x140 [lpfc]
  ...
  lpfc_sli4_io_xri_aborted+0x20d/0x270 [lpfc]
  lpfc_sli4_sp_handle_abort_xri_wcqe.isra.54+0x84/0x170 [lpfc]
  lpfc_sli4_fp_handle_cqe+0xc2/0x480 [lpfc]
  __lpfc_sli4_process_cq+0xc6/0x230 [lpfc]
  __lpfc_sli4_hba_process_cq+0x29/0xc0 [lpfc]
  process_one_work+0x14c/0x390

Crash was caused by a bad ndlp address passed to I/O indicated by the XRI
aborted CQE.  The address was not NULL so the routine deferenced the ndlp
ptr. The bad ndlp also caused the lpfc_sli4_io_xri_aborted to call an
erroneous io handler.  Root cause for the bad ndlp was an lpfc_ncmd that
was aborted, put on the abort_io list, completed, taken off the abort_io
list, sent to lpfc_release_nvme_buf where it was put back on the abort_io
list because the lpfc_ncmd->flags setting LPFC_SBUF_XBUSY was not cleared
on the final completion.

Rework the exchange busy handling to ensure the flags are properly set for
both scsi and nvme.

Fixes: c490850a ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Cc: <stable@vger.kernel.org> # v5.1+
Link: https://lore.kernel.org/r/20191018211832.7917-6-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix lockdep error in __lpfc_sli_ringtx_put(): The hbalock is valid for
sli3, but not for sli4.  Change lockdep to look at ring lock if sli4.

Also update comment in __lpfc_sli_issue_iocb_s4() to reflect proper
lock. Note: lockdep check is already correct.

Link: https://lore.kernel.org/r/20191018211832.7917-4-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When the adapter FW is administratively set to RO mode, a FW update
triggered by the driver's sysfs attribute will fail. Currently, the
driver's logging mechanism does not properly parse the adapter return codes
and print a meaningful message.  This oversight prevents quick diagnosis in
the field.

Parse the adapter return codes for Write_Object and write an appropriate
message to the system console.

[mkp: typo]

Link: https://lore.kernel.org/r/20191018211832.7917-3-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, lpfc_nvmet_mrq is always scaled back to the min(lpfc_nvmet_mrq,
lpfc_irq_chann). There's no reason to reduce it to the number of interrupt
vectors.  Rather, it should be scaled down based on the number of hardware
queues for the system (if lower than max of 16).

Change scaling to use hardware queue count rather than interrupt vector
count.

Link: https://lore.kernel.org/r/20191018211832.7917-2-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/cxlflash/main.c:47:22: warning:
 variable ioarcb set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.

Link: https://lore.kernel.org/r/20191021141957.18828-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-4-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

strncmp is currently used for "SendTargets" key and "All" value matching
without checking for trailing garbage. This means that Text request PDUs
with garbage such as "SendTargetsPlease=All" and "SendTargets=Alle" are
processed successfully as if they were "SendTargets=All" requests.
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-3-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Bump version to 50877.

Link: https://lore.kernel.org/r/1571120524-6037-8-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After IOP reset completion, AIF request command is not issued to the
controller. Driver schedules a worker thread to issue a AIF request command
after IOP reset completion.

[mkp: fix zeroday warning]

Link: https://lore.kernel.org/r/1571120524-6037-7-git-send-email-balsundar.p@microsemi.com
Acked-by: Balsundar P < Balsundar.P@microchip.com>
Signed-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently driver waits for the command IOCTL from the firmware and if the
firmware enters nonresponsive state, the driver doesn't respond till the
firmware is responsive again.

Check that firmware is alive, otherwise return -EBUSY.

[mkp: clarified commit desc]

Link: https://lore.kernel.org/r/1571120524-6037-6-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Set 180 second timeout for thor and 60 seconds for src controllers.

Link: https://lore.kernel.org/r/1571120524-6037-5-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>