- 08 4月, 2013 14 次提交
-
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Add a new chip for RTL8106E series. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The suggestion as following: - initial settings or default settings - rtl_hw_start_xxx. rtl_hw_start_xxx may change some default settings. - enable tx/rx. This has to be after the above two steps. - rtl_set_rx_mode. AcceptXXXs have to be enabled after enabling tx/rx. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Add a new chip for RTL8111G series. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
- replace rtl8168g-1.fw with rtl8168g-2.fw which support new method. - fix PHY power down is useless. - disable rx early which causes the rx abnormal. - enable auto fifo. - set 10M IFG to default value. - fix the conflict between jumbo frame and flow control. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Remove useless action PHY_READ_EFUSE, PHY_READ_MAC_BYTE, PHY_WRITE_MAC_BYTE, PHY_WRITE_ERI_WORD. And define the new action PHY_MDIO_CHG. PHY_MDIO_CHG is used to modify the mdio operation. By the way, the firmware could support setting mac ocp. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Add the new settings and correct the wrong settings. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace the current settings with rtl_writephy and rtl_readphy. For the hardware, the settings are same with previous ones. This make the setting method like the previous chips. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Some codes are belong to binary codes and should be removed. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter and IPVS updates for your net-next tree, most relevantly they are: * Add net namespace support to NFLOG, ULOG and ebt_ulog and NFQUEUE. The LOG and ebt_log target has been also adapted, but they still depend on the syslog netnamespace that seems to be missing, from Gao Feng. * Don't lose indications of congestion in IPv6 fragmentation handling, from Hannes Frederic Sowa.i * IPVS conversion to use RCU, including some code consolidation patches and optimizations, also some from Julian Anastasov. * cpu fanout support for NFQUEUE, from Holger Eitzenberger. * Better error reporting to userspace when dropping packets from all our _*_[xfrm|route]_me_harder functions, from Patrick McHardy. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 4月, 2013 11 次提交
-
-
由 Hannes Frederic Sowa 提交于
This change brings netfilter reassembly logic on par with reassembly.c. The corresponding change in net-next is (eec2e618 ipv6: implement RFC3168 5.3 (ecn protection) for ipv6 fragmentation handling) Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Now that this supports net namespace for nflog and nfqueue, we can remove the global proc_net_netfilter which has no clients anymore. Based on patch from Gao feng. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
This patch makes /proc/net/netfilter/nfnetlink_queue pernet. Moreover, there's a pernet instance table and lock. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
After this patch, all nf_loggers support net namespace. Still xt_LOG and ebt_log require syslog netns support. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
This patch makes /proc/net/netfilter/nfnetlink_log pernet. Moreover, there's a pernet instance table and lock. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Add pernet support to ipt_ULOG by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). This patch also make ulog_buffers and netlink socket nflognl per netns. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Add pernet support to ebt_ulog by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). This patch also make ulog_buffers and netlink socket ebtulognl per netns. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Add pernet support to xt_LOG by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). Since syslog ns has yet not been implemented, we don't want the containers to DDOS host's syslogd. So only enable ebt_log only from init_net and wait for syslog ns support Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Add pernet support to ebt_log by means of the new nf_log_set function added in (30e0c6a6 netfilter: nf_log: prepare net namespace support for loggers). Since syslog ns has yet not been implemented, we don't want the containers to DDOS host's syslogd. So only enable ebt_log only from init_net and wait for syslog ns support. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
This patch adds netns support to nf_log and it prepares netns support for existing loggers. It is composed of four major changes. 1) nf_log_register has been split to two functions: nf_log_register and nf_log_set. The new nf_log_register is used to globally register the nf_logger and nf_log_set is used for enabling pernet support from nf_loggers. Per netns is not yet complete after this patch, it comes in separate follow up patches. 2) Add net as a parameter of nf_log_bind_pf. Per netns is not yet complete after this patch, it only allows to bind the nf_logger to the protocol family from init_net and it skips other cases. 3) Adapt all nf_log_packet callers to pass netns as parameter. After this patch, this function only works for init_net. 4) Make the sysctl net/netfilter/nf_log pernet. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
This patch makes this proc dentry pernet. So far only init_net had a /proc/net/netfilter directory. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 05 4月, 2013 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
This patch implements per hash bucket locking for the frag queue hash. This removes two write locks, and the only remaining write lock is for protecting hash rebuild. This essentially reduce the readers-writer lock to a rebuild lock. This patch is part of "net: frag performance followup" http://thread.gmane.org/gmane.linux.network/263644 of which two patches have already been accepted: Same test setup as previous: (http://thread.gmane.org/gmane.linux.network/257155) Two 10G interfaces, on seperate NUMA nodes, are under-test, and uses Ethernet flow-control. A third interface is used for generating the DoS attack (with trafgen). Notice, I have changed the frag DoS generator script to be more efficient/deadly. Before it would only hit one RX queue, now its sending packets causing multi-queue RX, due to "better" RX hashing. Test types summary (netperf UDP_STREAM): Test-20G64K == 2x10G with 65K fragments Test-20G3F == 2x10G with 3x fragments (3*1472 bytes) Test-20G64K+DoS == Same as 20G64K with frag DoS Test-20G3F+DoS == Same as 20G3F with frag DoS Test-20G64K+MQ == Same as 20G64K with Multi-Queue frag DoS Test-20G3F+MQ == Same as 20G3F with Multi-Queue frag DoS When I rebased this-patch(03) (on top of net-next commit a210576c) and removed the _bh spinlock, I saw a performance regression. BUT this was caused by some unrelated change in-between. See tests below. Test (A) is what I reported before for patch-02, accepted in commit 1b5ab0de. Test (B) verifying-retest of commit 1b5ab0de corrospond to patch-02. Test (C) is what I reported before for this-patch Test (D) is net-next master HEAD (commit a210576c), which reveals some (unknown) performance regression (compared against test (B)). Test (D) function as a new base-test. Performance table summary (in Mbit/s): (#) Test-type: 20G64K 20G3F 20G64K+DoS 20G3F+DoS 20G64K+MQ 20G3F+MQ ---------- ------- ------- ---------- --------- -------- ------- (A) Patch-02 : 18848.7 13230.1 4103.04 5310.36 130.0 440.2 (B) 1b5ab0de : 18841.5 13156.8 4101.08 5314.57 129.0 424.2 (C) Patch-03v1: 18838.0 13490.5 4405.11 6814.72 196.6 461.6 (D) a210576c : 18321.5 11250.4 3635.34 5160.13 119.1 405.2 (E) with _bh : 17247.3 11492.6 3994.74 6405.29 166.7 413.6 (F) without bh: 17471.3 11298.7 3818.05 6102.11 165.7 406.3 Test (E) and (F) is this-patch(03), with(V1) and without(V2) the _bh spinlocks. I cannot explain the slow down for 20G64K (but its an artificial "lab-test" so I'm not worried). But the other results does show improvements. And test (E) "with _bh" version is slightly better. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> ---- V2: - By analysis from Hannes Frederic Sowa and Eric Dumazet, we don't need the spinlock _bh versions, as Netfilter currently does a local_bh_disable() before entering inet_fragment. - Fold-in desc from cover-mail V3: - Drop the chain_len counter per hash bucket. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2013 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Pull net into net-next to get the synchronize_net() bug fix in bonding. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix VSOCK layer handling of context ID changes, from Reilly Grant. 2) Now that we have a synchronize_net() in netdev_rx_handler_unregister(), we can't let any call sites hold locks. Unfortunately bonding does, so we have to drop the rwlock there a little bit earlier, fix from Veaceslav Falico. 3) MAC address setting loop exits one iteration too early in mlx4 driver, from Yan Burman. 4) Restore ipv6 routes properly upon ifdown/ifup of loopback, from Balakumaran Kannan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: VSOCK: Handle changes to the VMCI context ID. net IPv6 : Fix broken IPv6 routing table after loopback down-up cbq: incorrect processing of high limits net/mlx4_en: Fix setting initial MAC address bonding: get netdev_rx_handler_unregister out of locks
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap fixes from Mark Brown: "A small collection of fixes. The most important ones are those from Stephen and Lars-Peter both of which fix cache issues that have been lurking for a while but not manifesting noticably enough for anyone to report them." * tag 'regmap-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: async: Add missing return regmap: don't corrupt work buffer in _regmap_raw_write() regmap: cache Fix regcache-rbtree sync regmap: Initialize `map->debugfs' before regcache
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull DRM fixes from Dave Airlie: "Two core fixes, both regressions, along with some intel and some nouveau fixes for regressions and oopses" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: correctly restore mappings if drm_open fails drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "A collection of fixes pretty much across the MIPS code. Even the change to include/linux/signal.h by David Howells' 2a148698 ("Fix breakage in MIPS siginfo handling") should be considered MIPS-specific as it touches an ifdefed segment that is only relevant to MIPS and which unfortunately can't be made to go away entirely." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: Fix breakage in MIPS siginfo handling Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()" MIPS: BCM63XX: Make nvram checksum failure non fatal MIPS: Fix code generation for non-DSP capable CPUs MIPS: Fix inconsistent formatting inside /proc/cpuinfo MIPS: SEAD3: Enable LL/SC. MIPS: Get rid of CONFIG_CPU_HAS_LLSC again MIPS: Add dependencies for HAVE_ARCH_TRANSPARENT_HUGEPAGE MIPS: VR4133: Fix probe for LL/SC. MIPS: Fix logic errors in bitops.c MIPS: Use CONFIG_CPU_MIPSR2 in csum_partial.S MIPS: compat: Return same error ENOSYS as native for invalid operation.
-
由 Jacob Keller 提交于
Commit 7d4c04fc ("net: add option to enable error queue packets waking select") has an issue due to operator precedence causing the bit-wise OR to bind to the sock_flags call instead of the result of the terniary conditional. This fixes the *_poll functions to work properly. The old code results in "mask |= POLLPRI" instead of what was intended, which is to only include POLLPRI when the socket option is enabled. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilija Hadzic 提交于
If first drm_open fails, the error-handling path will incorrectly restore inode's mapping to NULL. This can cause the crash later on. Fix by separately storing away mapping pointers that drm_open can touch and restore each from its own respective variable if the call fails. Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850 (thanks to Michal Hocko for investigating investigating and finding the root cause of the bug) Reference: http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html v2: Use one variable to store file and inode mapping since they are the same at the function entry. Fix spelling mistakes in commit message. v3: Add reference to the original bug report. Reported-by: NMarco Munderloh <munderl@tnt.uni-hannover.de> Tested-by: NMarco Munderloh <munderl@tnt.uni-hannover.de> Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Oops fixers. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's
-
由 Guenter Roeck 提交于
Since of_get_mac_address() is now declared even if CONFIG_OF_NET is not configured, the ifdef is no longer necessary and can be removed. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
Since of_get_mac_address() is now defined even if CONFIG_OF_NET is not configured, the ifdef around the code calling it is no longer necessary and can be removed. Similar, since of_get_phy_mode() is now defined as dummy function if OF_NET is not configured, it is no longer necessary to provide an OF dependent function as front-end. Also, the function depends on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end function and call of_get_phy_mode() directly. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
of_get_mac_address() and of_get_phy_mode() are only provided if OF_NET is configured. While most callers check for the define, not all do, and those who do require #ifdef around the code. For those who don't, the missing check can result in errors such as arch/powerpc/sysdev/tsi108_dev.c:107:3: error: implicit declaration of function 'of_get_mac_address' [-Werror=implicit-function-declaration] arch/powerpc/sysdev/mv64x60_dev.c:253:2: error: implicit declaration of function 'of_get_mac_address' [-Werror=implicit-function-declaration] Provide empty functions if OF_NET is not configured. This is safe because all callers do check the return values. Cc: David Daney <david.daney@cavium.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~danvet/drm-intel由 Dave Airlie 提交于
One locking regression fix, and a couple of other i915 ones. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails
-