r8169: Remove firmware code

Some codes are belong to binary codes and should be removed.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/r8169.c

@@ -3368,32 +3368,6 @@ static void rtl8411_hw_phy_config(struct rtl8169_private *tp)
 
 static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
 {
-	static const u16 mac_ocp_patch[] = {
-		0xe008, 0xe01b, 0xe01d, 0xe01f,
-		0xe021, 0xe023, 0xe025, 0xe027,
-		0x49d2, 0xf10d, 0x766c, 0x49e2,
-		0xf00a, 0x1ec0, 0x8ee1, 0xc60a,
-
-		0x77c0, 0x4870, 0x9fc0, 0x1ea0,
-		0xc707, 0x8ee1, 0x9d6c, 0xc603,
-		0xbe00, 0xb416, 0x0076, 0xe86c,
-		0xc602, 0xbe00, 0x0000, 0xc602,
-
-		0xbe00, 0x0000, 0xc602, 0xbe00,
-		0x0000, 0xc602, 0xbe00, 0x0000,
-		0xc602, 0xbe00, 0x0000, 0xc602,
-		0xbe00, 0x0000, 0xc602, 0xbe00,
-
-		0x0000, 0x0000, 0x0000, 0x0000
-	};
-	u32 i;
-
-	/* Patch code for GPHY reset */
-	for (i = 0; i < ARRAY_SIZE(mac_ocp_patch); i++)
-		r8168_mac_ocp_write(tp, 0xf800 + 2*i, mac_ocp_patch[i]);
-	r8168_mac_ocp_write(tp, 0xfc26, 0x8000);
-	r8168_mac_ocp_write(tp, 0xfc28, 0x0075);
-
 	rtl_apply_firmware(tp);
 
 	if (r8168_phy_ocp_read(tp, 0xa460) & 0x0100)