To make it more readable and maintainable, split
hclgevf_set_rss_tuple() into two parts.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To improve code readability and maintainability, separate
the flow type parsing part and the converting part from
bloated hclgevf_get_rss_tuple().
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the RSS commands of VF are using host byte order.
According to the user manual, it should use little endian in
the command to firmware. For the host and firmware are both
using little endian, so it can work well in this case.

Do cleanup to make it more explicitly.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix an issue where the formatting symbol of the formatting input and
output function does not match the actual type.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the newer hardware may supports different frame size,
so add support to obtain the capability from the firmware
instead of the fixed value.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

As RSS indirection table size may be different in different
hardware. Instead of using macro, this value is better to use
device specification which querying from firmware.

BTW, RSS indirection table should be allocated by the queried
size instead the static array.

.get_rss_indir_size in struct hnae3_ae_ops is not used now,
so remove it as well.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For DEVICE_VERSION_V2, the hardware only supports src-ip,
dst-ip and verification-tag for rss tuple set of sctp6
packet. For DEVICE_VERSION_V3, the hardware supports
src-port and dst-port as well.

Currently, when user queries the sctp6 rss tuples info,
some unsupported information will be showed on V2. So add
a check for hardware version when initializing and queries
sctp6 rss tuple to fix this issue.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, there are multiple members related to tc information
in struct hnae3_knic_private_info. Merge them into a new struct
hnae3_tc_info.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the tx unicast promisc is always enabled when promisc
mode on. If tx unicast promisc on, a function will receive all
unicast packet from other functions belong to the same port.
Add a ethtool private flag to control whether enable tx
unicast promisc. Then the function is able to filter the
unknown unicast packets from other function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

There are spelling mistakes in two dev_err messages. Fix them.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201123103452.197708-1-colin.king@canonical.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

For device who has device memory accessed through the PCI BAR4,
IO descriptor push of NIC and direct WQE(Work Queue Element) of
RoCE will use this device memory, so add support for mapping
this device memory, and add this info to the RoCE client whose
new feature needs.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For DEVICE_VERSION_V1/2, there are total 1024 queues and
queue sets. For DEVICE_VERSION_V3, it increases to 1280,
and can be assigned to one pf， so remove the limitation
of 1024.

To keep compatible with DEVICE_VERSION_V1/2 and old driver
version, the queue number is split into two part:
tqp_num(range 0~1023) and ext_tqp_num(range 1024~1279).
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For maintainability and compatibility, add support for querying
the maximum value of GL.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

QL(quantity limiting) means that hardware supports the interrupt
coalesce based on the frame quantity.  QL can be configured when
int_ql_max in device's specification is non-zero, so add support
to configure it. Also, rename two coalesce init function to fit
their purpose.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When unbinding the hns3 driver with the HNS3 VF, I got the following
kernel panic:

[  265.709989] Unable to handle kernel paging request at virtual address ffff800054627000
[  265.717928] Mem abort info:
[  265.720740]   ESR = 0x96000047
[  265.723810]   EC = 0x25: DABT (current EL), IL = 32 bits
[  265.729126]   SET = 0, FnV = 0
[  265.732195]   EA = 0, S1PTW = 0
[  265.735351] Data abort info:
[  265.738227]   ISV = 0, ISS = 0x00000047
[  265.742071]   CM = 0, WnR = 1
[  265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000
[  265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000
[  265.764314] Internal error: Oops: 96000047 [#1] SMP
[  265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206
[  265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019
[  265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[  265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300
[  265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300
[  265.861992] sp : ffff80004c983b50
[  265.881411] pmr_save: 000000e0
[  265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500
[  265.889744] x27: 0000000000000000 x26: 0000000000000000
[  265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90
[  265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150
[  265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90
[  265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004
[  265.916198] x17: 0000000000000000 x16: ffff800011ae32e8
[  265.916201] x15: 0000000000000028 x14: 0000000000000002
[  265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8
[  265.946619] x11: ffff80004c983b50 x10: 0000000000000000
[  265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000
[  265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff
[  265.951917] x5 : ffff80004c983930 x4 : 0000000000000001
[  265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100
[  265.964487] x1 : 0000000000000000 x0 : ffff800054627000
[  265.964491] Call trace:
[  265.964494]  hclgevf_cmd_uninit+0xbc/0x300
[  265.964496]  hclgevf_uninit_ae_dev+0x9c/0xe8
[  265.964501]  hnae3_unregister_ae_dev+0xb0/0x130
[  265.964516]  hns3_remove+0x34/0x88 [hns3]
[  266.009683]  pci_device_remove+0x48/0xf0
[  266.009692]  device_release_driver_internal+0x114/0x1e8
[  266.030058]  device_driver_detach+0x28/0x38
[  266.034224]  unbind_store+0xd4/0x108
[  266.037784]  drv_attr_store+0x40/0x58
[  266.041435]  sysfs_kf_write+0x54/0x80
[  266.045081]  kernfs_fop_write+0x12c/0x250
[  266.049076]  vfs_write+0xc4/0x248
[  266.052378]  ksys_write+0x74/0xf8
[  266.055677]  __arm64_sys_write+0x24/0x30
[  266.059584]  el0_svc_common.constprop.3+0x84/0x270
[  266.064354]  do_el0_svc+0x34/0xa0
[  266.067658]  el0_svc+0x38/0x40
[  266.070700]  el0_sync_handler+0x8c/0xb0
[  266.074519]  el0_sync+0x140/0x180

It looks like the BAR memory region had already been unmapped before we
start clearing CMDQ registers in it, which is pretty bad and the kernel
happily kills itself because of a Current EL Data Abort (on arm64).

Moving the CMDQ uninitialization a bit early fixes the issue for me.

Fixes: 862d969a ("net: hns3: do VF's pci re-initialization while PF doing FLR")
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add RoCE VF client reset support by notifying the RoCE VF client
when hns3 VF is resetting and adding a interface to query whether
CMDQ is ready to work.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device specifications querying is unsupported by the old
firmware, in this case, these specifications are 0. However,
some specifications should not be 0 or will cause problem.

So after querying from firmware, some device specifications
are needed to check their value and set to default value if
their values are 0.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To improve code maintainability and compatibility, new commands
HCLGE_OPC_QUERY_DEV_SPECS for PF and HCLGEVF_OPC_QUERY_DEV_SPECS
for VF are introduced to query device specifications, instead of
statically defining specifications by checking the hardware version
or other methods.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To better identify the device version, struct hnae3_handle adds a
member dev_version to replace pci revision. The dev_version consists
of hardware version and PCI revision. The hardware version is queried
from firmware by an existing firmware version query command.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VF devices do not have speed division, its speed is depended on its PF.
So macro name of PCI device id of VF is incorrent to have 100G info, it
should be renamed by removing 100G info.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a variable is assigned a value before it is used, it's no
need to assign an initial value to the variable. So remove
these redundant operations.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When reset fails, if there are some pending jobs for the periodic
service task, it does not do anything except print error each
time the task is scheduled. So skip the periodic service task if
reset failed.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since variable send_msg and ret only used in if branch, so move
their definition into the if branch.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When device is resetting or reset failed, firmware is unable to
handle mailbox. VLAN should not be configured in this case.

Fixes: fe4144d4 ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently hclgevf_update_port_base_vlan_info() may be called when
VF is resetting,  which may cause hns3_nic_net_open() being called
twice unexpectedly.

So fix it by adding a reset check for it, and extend critical
region for rntl_lock in hclgevf_update_port_base_vlan_info().

Fixes: 92f11ea1 ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE
and handshake status should not set, otherwise the retry will
fail. So adds a check for asserting VF reset and returns
directly when fails.

Fixes: ef5f8e50 ("net: hns3: stop handling command queue while resetting VF")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(),
and fix a reverse xmas tree coding style issue in
hclgevf_set_rss_tc_mode().
Reported-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same
as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG,
replace the former with the latter, and rename macro
HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of
'state'.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8
according to the UM, otherwise, it will overwrite the reserved
byte which may be used for other purpose.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To prevent from initializing VF NIC client in reset handling state,
this patch adds resetting check in hclgevf_init_nic_client_instance().
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the PF driver removes all (including its VFs') MAC/VLAN
flow director table entries when resetting, and restores them after
reset completed.

In fact, the hardware will clear all table entries only in IMP
reset and global reset. So driver only needs to restore the table
entries in these cases, and needs do nothing when PF reset, FLR
or other function level reset.

This patch optimizes it by removing unnecessary table entries clear
and restoring handling in the reset flow, and doing the restoring
after reset completed.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the HNS3 driver doesn't update the MAC address directly in
function hns3_set_rx_mode() now, it can't know whether the
MAC table is full from __dev_uc_sync() and __dev_mc_sync(),
so it's senseless to handle the overflow promisc here.

This patch removes the handle of overflow promisc from function
hns3_set_rx_mode(), and updates the promisc mode in the service
task.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the HNS3 driver sync and unsync MAC address in function
hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly
in the path of dev_set_rx_mode(). If failed, it won't retry until
next calling of hns3_set_rx_mode(). On the other hand, if request
add and remove a same address many times at a short interval, each
request must be done one by one, can't be merged. For VF, it sends
mailbox messages to PF to request adding or deleting MAC address in
the path of function hns3_set_rx_mode(), no matter the address is
configured success.

This patch refines it by recording the MAC address in function
hns3_set_rx_mode(), and updating MAC address in the service task.
If failed, it will retry by the next calling of periodical service
task. It also uses some state to mark the state of each MAC address
in the MAC list, which can help merge configure request for a same
address. With these changes, when global reset or IMP reset occurs,
we can restore the MAC table with the MAC list.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, VF's RSS configuration would be set to default
after VF reset, the the user's one will loss.

To fix it, this patch separates hclgevf_rss_init_hw() into
two parts, one sets up the default RSS configuration and
just be called when driver loading, one configures the hardware
and be called by driver loading or reset.

Fixes: d97b3072 ("net: hns3: Add RSS tuples support for VF")
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag
in order to guarantee forward progress, which may cause hns3'
WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ
warning:

[11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished.
[11246.209979] hns3 0000:bd:00.1 eth7: net open
[11246.227608] ------------[ cut here ]------------
[11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140
[11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2]
[11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G           O      5.4.0-rc4+ #1
[11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019
[11246.344802] Workqueue: hclge hclge_service_task [hclge]
[11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO)
[11246.354779] pc : check_flush_dependency+0xcc/0x140
[11246.359549] lr : check_flush_dependency+0xcc/0x140
[11246.364317] sp : ffff800268a73990
[11246.367618] x29: ffff800268a73990 x28: 0000000000000001
[11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000
[11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868
[11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600
[11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800
[11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948
[11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002
[11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65
[11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672
[11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d
[11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e
[11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145
[11246.431068] x5 : 0000000000000000 x4 : 0000000000000000
[11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff
[11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000
[11246.446928] Call trace:
[11246.449363]  check_flush_dependency+0xcc/0x140
[11246.453785]  flush_workqueue+0x110/0x410
[11246.457691]  ib_cache_cleanup_one+0x54/0x468
[11246.461943]  __ib_unregister_device+0x70/0xa8
[11246.466279]  ib_unregister_device+0x2c/0x40
[11246.470455]  hns_roce_exit+0x34/0x198 [hns_roce_hw_v2]
[11246.475571]  __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2]
[11246.482934]  hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2]
[11246.489261]  hclge_notify_roce_client+0x84/0xe0 [hclge]
[11246.494464]  hclge_reset_rebuild+0x60/0x730 [hclge]
[11246.499320]  hclge_reset_service_task+0x400/0x5a0 [hclge]
[11246.504695]  hclge_service_task+0x54/0x698 [hclge]
[11246.509464]  process_one_work+0x15c/0x458
[11246.513454]  worker_thread+0x144/0x520
[11246.517186]  kthread+0xfc/0x128
[11246.520314]  ret_from_fork+0x10/0x18
[11246.523873] ---[ end trace eb980723699c2585 ]---
[11246.528710] hns3 0000:bd:00.2: Func clear success after reset.
[11246.528747] hns3 0000:bd:00.0: Func clear success after reset.
[11246.907710] hns3 0000:bd:00.1 eth7: link up

According to [1] and [2]:

There seems to be no specific guidance about how to handling the
forward progress guarantee of network device's WQ yet, and other
network device's WQ seem to be marked with WQ_MEM_RECLAIM without
a clear reason.

So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ
to aviod the above warning.

1. https://www.spinics.net/lists/netdev/msg631646.html
2. https://www.spinics.net/lists/netdev/msg632097.html

Fixes: 0ea68902 ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For making the code more readable, this adds several new
structure to replace the msg field in structure
hclge_mbx_vf_to_pf_cmd and hclge_mbx_pf_to_vf_cmd.
Also uses macro to instead of some magic number.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if VF is loaded on the host side, the host doesn't
clear the VF's VLAN table entries when VF removing. In this
case, when doing reset and disabling sriov at the same time the
VLAN device over VF will be removed, but the VLAN table entries
in hardware are remained.

This patch fixes it by asking PF to clear the VLAN table entries for
VF when VF is removing. It also clears the VLAN table full bit
after VF VLAN table entries being cleared.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>