提交 55ff3ed5 编写于 作者: J Jian Shen 提交者: David S. Miller

net: hns3: cleanup for endian issue for VF RSS

Currently the RSS commands of VF are using host byte order.
According to the user manual, it should use little endian in
the command to firmware. For the host and firmware are both
using little endian, so it can work well in this case.

Do cleanup to make it more explicitly.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7ceb40b8
......@@ -216,8 +216,8 @@ struct hclgevf_rss_input_tuple_cmd {
#define HCLGEVF_RSS_CFG_TBL_SIZE 16
struct hclgevf_rss_indirection_table_cmd {
u16 start_table_index;
u16 rss_set_bitmap;
__le16 start_table_index;
__le16 rss_set_bitmap;
u8 rsv[4];
u8 rss_result[HCLGEVF_RSS_CFG_TBL_SIZE];
};
......@@ -229,7 +229,7 @@ struct hclgevf_rss_indirection_table_cmd {
#define HCLGEVF_RSS_TC_VALID_B 15
#define HCLGEVF_MAX_TC_NUM 8
struct hclgevf_rss_tc_mode_cmd {
u16 rss_tc_mode[HCLGEVF_MAX_TC_NUM];
__le16 rss_tc_mode[HCLGEVF_MAX_TC_NUM];
u8 rsv[8];
};
......
......@@ -658,8 +658,9 @@ static int hclgevf_set_rss_indir_table(struct hclgevf_dev *hdev)
for (i = 0; i < rss_cfg_tbl_num; i++) {
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_RSS_INDIR_TABLE,
false);
req->start_table_index = i * HCLGEVF_RSS_CFG_TBL_SIZE;
req->rss_set_bitmap = HCLGEVF_RSS_SET_BITMAP_MSK;
req->start_table_index =
cpu_to_le16(i * HCLGEVF_RSS_CFG_TBL_SIZE);
req->rss_set_bitmap = cpu_to_le16(HCLGEVF_RSS_SET_BITMAP_MSK);
for (j = 0; j < HCLGEVF_RSS_CFG_TBL_SIZE; j++)
req->rss_result[j] =
indir[i * HCLGEVF_RSS_CFG_TBL_SIZE + j];
......@@ -700,12 +701,16 @@ static int hclgevf_set_rss_tc_mode(struct hclgevf_dev *hdev, u16 rss_size)
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_RSS_TC_MODE, false);
for (i = 0; i < HCLGEVF_MAX_TC_NUM; i++) {
hnae3_set_bit(req->rss_tc_mode[i], HCLGEVF_RSS_TC_VALID_B,
u16 mode = 0;
hnae3_set_bit(mode, HCLGEVF_RSS_TC_VALID_B,
(tc_valid[i] & 0x1));
hnae3_set_field(req->rss_tc_mode[i], HCLGEVF_RSS_TC_SIZE_M,
hnae3_set_field(mode, HCLGEVF_RSS_TC_SIZE_M,
HCLGEVF_RSS_TC_SIZE_S, tc_size[i]);
hnae3_set_field(req->rss_tc_mode[i], HCLGEVF_RSS_TC_OFFSET_M,
hnae3_set_field(mode, HCLGEVF_RSS_TC_OFFSET_M,
HCLGEVF_RSS_TC_OFFSET_S, tc_offset[i]);
req->rss_tc_mode[i] = cpu_to_le16(mode);
}
status = hclgevf_cmd_send(&hdev->hw, &desc, 1);
if (status)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册