some MUSB incarnations, such as those governed by
omap2430.c and tusb6010.c, have three resources, not
two.

Fix the bug created by commit 09fc7d22 (usb: musb:
fix incorrect usage of resource pointer) where only
two of the three resources would be passed to musb_core.c

[ balbi@ti.com : add tusb6010.c to original patch ]
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

it does not compile since 09fc7d ("usb: musb: fix incorrect usage of
resource pointer"). What makes me wonder most is if source of the
Tested-by tag :)
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the hcd is now a direct member of struct musb, we can now simply
eliminate the musb_to_hcd() macro. There aren't that many users left
anyway, as some where already fixed up when parts were factored out to
musb_host.c
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We can't simply pass the resource pointer from our
device down to our children, otherwise module
reinsertion will not work as the resource will
continue to be marked as busy.

Fix it by building a proper struct resource for
our child musb device.
Tested-by: NDmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Correct spelling typo in various part of drivers
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add the missing platform_device_put() before return from
omap2430_probe() in the error handling case.

Introduced by commit ca784be3
(usb: start using the control module driver)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

On USB_EVENT_ID event the musb glue enables VBUS by calling
omap2430_musb_set_vbus(musb, 1) that sets the session bit, but on
USB_EVENT_NONE reverse action is never made, and that breaks PM.

Disable VBUS on USB_EVENT_NONE to be sure musb session is ended
on cable unplug so that PM works.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

PHY layer no longer returns NULL. It will
return -ENXIO when PHY layer isn't enabled
and we can use that to bail out instead of
request a probe deferral.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Some PHYs load too early (twl4030) making omap glue to miss cable connect events
if the board is booted with cable connected. So adding usb_phy_init in
omap2430_musb_init lets PHYs to report events once glue is ready.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

No functional change. otg_set_vbus is already protected so removed the
check before calling otg_set_vbus.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

No functional change. Replace *_* with *-* in property names of otg to
follow the general convention.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

all other functions under drivers/usb/ start
with usb_, let's do the same thing.

This patch is in preparation for moving otg_state_string
to usb-common.c and deleting otg.c completely.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fix the following sparse warning:

drivers/usb/musb/omap2430.c:54:33: warning: symbol '_glue' was not \
	declared. Should it be static?
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Commit 80ab72e1 (usb: musb: omap2430: fix the readiness check
in omap_musb_mailbox) made the check incorrect, as we will lose the
glue/link status during the normal built-in probe order (twl4030_usb is
probed after musb omap2430, but before musb core is ready).

As a result, if you boot with USB cable on and load g_ether, the
connection does not work as the code thinks the cable is off and the
phy gets powered down immediately. This is a major regression in 3.9-rc1.

So the proper check should be: exit if _glue is NULL, but if it's
initialized we memorize the status, and then check if the musb core
is ready.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The OMAP glue has been modified to get PHY by phandle
for dt boot.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

New PHY lib APIs like usb_add_phy_dev() and devm_usb_get_phy_dev() are
used in MUSB (OMAP), in order to make use of the binding information
provided in the board file (of OMAP platforms).

All the platforms should be modified similar to this to add and get the
PHY.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Start using the control module driver for powering on the PHY and for
writing to the mailbox instead of writing to the control module
registers on their own.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 00a0b1d5 (usb: musb: omap: Add device
tree support for omap musb glue) assigns result of devm_kzalloc() call to
the 'config' variable but then checks for NULL the 'data' variable (already
checked after previous call). Thus we risk a kernel oops further when data
pointed by 'config' is written to by subsequent of_property_read_u32() calls
iff the allocation happens to fail...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch let glue driver return -EPROBE_DEFER if the transceiver
is not readly, so we can support defer probe on musb to fix the
below error on 3.7-rc5 if transceiver drivers are built as module:

[   19.052490] unable to find transceiver of type USB2 PHY
[   19.072052] HS USB OTG: no transceiver configured
[   19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19
[   19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19
[   19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430'
[   19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430
[   19.174407] bus: 'platform': add driver twl4030_usb
[   19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb
[   19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb
[   19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
[   19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready
[   19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb'
[   19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb

Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: <stable@vger.kernel.org> v3.8
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Commit 00a0b1d5 (usb: musb: omap: Add device
tree support for omap musb glue) added assignments of the 'ret' variable to
-ENOMEM on *some* error paths of the calls to devm_kzalloc(), while that
variable was already pre-initialized for to that value, so these assignments
were completely redundant. Kill them, fixing overindented string, while at it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The check in omap_musb_mailbox does not properly check if the module has
been fully initialized. The patch fixes that, and the kernel panic below:

$ modprobe twl4030-usb
[   13.924743] twl4030_usb twl4030-usb.33: HW_CONDITIONS 0xe0/224; link 3
[   13.940307] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[   13.948883] pgd = ef27c000
[   13.951751] [00000004] *pgd=af256831, *pte=00000000, *ppte=00000000
[   13.958374] Internal error: Oops: 17 [#1] ARM
[   13.962921] Modules linked in: twl4030_usb(+) omap2430 libcomposite
[   13.969543] CPU: 0    Not tainted  (3.8.0-rc1-n9xx-11758-ge37a37c-dirty #6)
[   13.976867] PC is at omap_musb_mailbox+0x18/0x54 [omap2430]
[   13.982727] LR is at twl4030_usb_probe+0x240/0x354 [twl4030_usb]
[   13.989013] pc : [<bf013b6c>]    lr : [<bf018958>]    psr: 60000013
[   13.989013] sp : ef273cf0  ip : ef273d08  fp : ef273d04
[   14.001068] r10: bf01b000  r9 : bf0191d8  r8 : 00000001
[   14.006530] r7 : 00000000  r6 : ef140e10  r5 : 00000003  r4 : 00000000
[   14.013397] r3 : bf0142dc  r2 : 00000006  r1 : 00000000  r0 : 00000003
[   14.020233] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   14.027740] Control: 10c5387d  Table: af27c019  DAC: 00000015
[   14.033752] Process modprobe (pid: 616, stack limit = 0xef272238)
[   14.040161] Stack: (0xef273cf0 to 0xef274000)
[   14.044708] 3ce0:                                     ef254310 00000001 ef273d34 ef273d08
[   14.053314] 3d00: bf018958 bf013b60 bf0190a4 ef254310 c0101550 c0c3a138 ef140e10 ef140e44
[   14.061889] 3d20: bf019150 00000001 ef273d44 ef273d38 c019890c bf018724 ef273d64 ef273d48
[   14.070495] 3d40: c01974fc c01988f8 ef140e10 bf019150 ef140e44 00000000 ef273d84 ef273d68
[   14.079071] 3d60: c0197728 c019748c c0197694 00000000 bf019150 c0197694 ef273dac ef273d88
[   14.087677] 3d80: c0195c38 c01976a0 ef03610c ef143eb0 c0128954 ef254780 bf019150 c0b19548
[   14.096252] 3da0: ef273dbc ef273db0 c0197098 c0195bf0 ef273dec ef273dc0 c0196c98 c0197080
[   14.104858] 3dc0: bf0190a4 c0b27bc0 ef273dec bf019150 bf019190 c0b27bc0 ef272000 00000001
[   14.113433] 3de0: ef273e14 ef273df0 c0197c18 c0196b30 ef273f48 bf019190 c0b27bc0 ef272000
[   14.122039] 3e00: 00000001 bf01b000 ef273e24 ef273e18 c0198b28 c0197ba4 ef273e34 ef273e28
[   14.130615] 3e20: bf01b014 c0198ae8 ef273e8c ef273e38 c0008918 bf01b00c c004f730 c012ba1c
[   14.139221] 3e40: ef273e74 00000000 c00505b0 c004f72c 00000000 ef273e60 ef273f48 bf019190
[   14.147796] 3e60: 00000001 ef273f48 bf019190 00000001 ef286340 00000001 bf0191d8 c0065414
[   14.156402] 3e80: ef273f44 ef273e90 c0067754 c00087fc bf01919c 00007fff c0064794 00000000
[   14.164978] 3ea0: ef273ecc f0064000 00000001 ef272000 ef272000 00067f39 bf0192b0 bf01919c
[   14.173583] 3ec0: ef273f0c ef273ed0 c00a6bf0 c00a53fc ff000000 000000d2 c0067dc8 00000000
[   14.182159] 3ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   14.190765] 3f00: 00000000 00000000 00000000 00000000 00000000 00000000 ffffffff 00002968
[   14.199340] 3f20: 00080878 00067f39 00000080 c000e2e8 ef272000 00000000 ef273fa4 ef273f48
[   14.207946] 3f40: c0067e54 c0066188 f0064000 00002968 f0065530 f0065463 f0065fb0 000012c4
[   14.216522] 3f60: 00001664 00000000 00000000 00000000 00000014 00000015 0000000c 00000000
[   14.225128] 3f80: 00000008 00000000 00000000 00080370 00080878 0007422c 00000000 ef273fa8
[   14.233703] 3fa0: c000e140 c0067d80 00080370 00080878 00080878 00002968 00067f39 00000000
[   14.242309] 3fc0: 00080370 00080878 0007422c 00000080 00074030 00067f39 bec7aef8 00000000
[   14.250885] 3fe0: b6f05300 bec7ab68 0000e93c b6f05310 60000010 00080878 af7fe821 af7fec21
[   14.259460] Backtrace:
[   14.262054] [<bf013b54>] (omap_musb_mailbox+0x0/0x54 [omap2430]) from [<bf018958>] (twl4030_usb_probe+0x240/0x354 [twl4030_usb])
[   14.274200]  r5:00000001 r4:ef254310
[   14.277984] [<bf018718>] (twl4030_usb_probe+0x0/0x354 [twl4030_usb]) from [<c019890c>] (platform_drv_probe+0x20/0x24)
[   14.289123]  r8:00000001 r7:bf019150 r6:ef140e44 r5:ef140e10 r4:c0c3a138
[   14.296203] [<c01988ec>] (platform_drv_probe+0x0/0x24) from [<c01974fc>] (driver_probe_device+0x7c/0x214)
[   14.306243] [<c0197480>] (driver_probe_device+0x0/0x214) from [<c0197728>] (__driver_attach+0x94/0x98)
[   14.316009]  r7:00000000 r6:ef140e44 r5:bf019150 r4:ef140e10
[   14.321990] [<c0197694>] (__driver_attach+0x0/0x98) from [<c0195c38>] (bus_for_each_dev+0x54/0x88)
[   14.331390]  r6:c0197694 r5:bf019150 r4:00000000 r3:c0197694
[   14.337371] [<c0195be4>] (bus_for_each_dev+0x0/0x88) from [<c0197098>] (driver_attach+0x24/0x28)
[   14.346588]  r6:c0b19548 r5:bf019150 r4:ef254780
[   14.351440] [<c0197074>] (driver_attach+0x0/0x28) from [<c0196c98>] (bus_add_driver+0x174/0x244)
[   14.360687] [<c0196b24>] (bus_add_driver+0x0/0x244) from [<c0197c18>] (driver_register+0x80/0x154)
[   14.370086]  r8:00000001 r7:ef272000 r6:c0b27bc0 r5:bf019190 r4:bf019150
[   14.377136] [<c0197b98>] (driver_register+0x0/0x154) from [<c0198b28>] (platform_driver_register+0x4c/0x60)
[   14.387390] [<c0198adc>] (platform_driver_register+0x0/0x60) from [<bf01b014>] (twl4030_usb_init+0x14/0x1c [twl4030_usb])
[   14.398895] [<bf01b000>] (twl4030_usb_init+0x0/0x1c [twl4030_usb]) from [<c0008918>] (do_one_initcall+0x128/0x1a8)
[   14.409790] [<c00087f0>] (do_one_initcall+0x0/0x1a8) from [<c0067754>] (load_module+0x15d8/0x1bf8)
[   14.419189] [<c006617c>] (load_module+0x0/0x1bf8) from [<c0067e54>] (sys_init_module+0xe0/0xf4)
[   14.428344] [<c0067d74>] (sys_init_module+0x0/0xf4) from [<c000e140>] (ret_fast_syscall+0x0/0x30)
[   14.437652]  r6:0007422c r5:00080878 r4:00080370
[   14.442504] Code: e24cb004 e59f3038 e1a05000 e593401c (e5940004)
[   14.448944] ---[ end trace dbf47e5bc5ba03c2 ]---
[   14.453826] Kernel panic - not syncing: Fatal exception
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is based on the discussion of a previous patch to fix an issue
where the omap2430 musb driver is not working for N9/N950.

Moving all the interrupt handling to the devices. Avoids inclusion of generic
interrupt and breakage due to sometimes misleading CONFIG options. This makes
sure usb always works if on of the subdrivers is chosen. Tested on Nokia N9/N950.

Partially clean up CONFIG_SOC_OMAP3430 which is not necessary in the cases
where I removed it. Also helps with the removal work of those options that
Tony Lindgren predicted would happen at some point.
Signed-off-by: NPhilippe De Swert <philippe.deswert@jollamobile.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This replaced the handcrafted id handling by the PLATFORM_DEVID_AUTO
value which should do the same thing.

This patch probably also fixes ux500 because I did not find the "musbid"
variable to remove. And we close a tiny-unlikely race window becuase the
old code gave the id back before device was destroyed in the remove
case.

[ balbi@ti.com : fixed up two failed hunks when applying patch ]

Cc: B, Ravi <ravibabu@ti.com>
Cc: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Cc: Bob Liu <lliubbo@gmail.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Added musb_ida in musb_core.c to manage the multi core ids.
Signed-off-by: NRavi Babu <ravibabu@ti.com>
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NSanthapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Added device tree support for omap musb driver and updated the
Documentation with device tree binding information.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The glue layer should directly write to mailbox register (present in
control module) instead of calling phy layer to write to mailbox
register. Writing to mailbox register notifies the core of events like
device connect/disconnect.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Variable ret is always evaluated as true, so we don't need to check it.
Signed-off-by: NMatthias Brugger <mbrugger@iseebcn.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

When called during resume_irqs, omap2430_musb_set_vbus() is run with
interrupts disabled,  In that case 'jiffies' never changes so the loop
can loop forever.

So impose a maximum loop count and add an 'mdelay' to ensure we wait
a reasonable amount of time for bit to be cleared.

This fixes a hang on resume.
Signed-of-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

we are compiling the driver always with full OTG
capabilities, so that board_mode trick becomes
useless.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

No functional change. Just replaced the call to platform_device_del and
platform_device_put with platform_device_unregister.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

usb_get_phy will return -ENODEV if it's not able to find the phy. Hence
fixed all the callers of usb_get_phy to check for this error condition
instead of relying on a non-zero value as success condition.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

used devres API while allocating memory resource and while getting
usb phy so that these resources are released automatically on driver
detach.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Moved otg specific state(OTG_STATE_B_IDLE, OTG_STATE_A_IDLE) initializations
from twl to glue. These initializations are removed from twl4030 and
twl6030 and moved to the mailbox API defined in glue.
This is part of the cleanup in preparation to make use of usb2 phy
driver.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events,
is replaced by a direct call to omap musb blue.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Commit 712d8e(fixes pm_runtime calls while atomic by using a work
queue. musb pm_runtime_get_sync call happens in interrupt context
on cable attach case. That can result in re-enabling the interrupts and
cause side affect. To avoid this deferred processing is used)

While the issue and the work queue implementation is specific to omap
(omap2430.c), the work_struct is defined as a member of struct musb
(musb_core.h). Hence moved the work_struct from musb_core to omap
glue.

Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add a linked list for keeping multiple PHY instances with different
types so that we can have separate USB2 and USB3 PHYs on one single
board. _get_phy_ has been changed so that the controller gets
the transceiver by type. _remove_phy_ has been added to let the phy
be removed from the phy list.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>