Since the breadcrumb enabling/cancelling itself is serialised by the
breadcrumbs.irq_lock, with a bit of care we can remove the outer
serialisation with i915_request.lock for concurrent
dma_fence_enable_signaling(). This has the important side-effect of
eliminating the nested i915_request.lock within request submission.

The challenge in serialisation is around the unsubmission where we take
an active request that wants a breadcrumb on the signaling engine and
put it to sleep. We do not want a concurrent
dma_fence_enable_signaling() to attach a breadcrumb as we unsubmit, so
we must mark the request as no longer active before serialising with the
concurrent enable-signaling.

On retire, we serialise with the concurrent enable-signaling, but
instead of clearing ACTIVE, we mark it as SIGNALED.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Before we can execute a request, we must wait for all of its vma to be
bound. This is a frequent operation for which we can optimise away a
few atomic operations (notably a cmpxchg) in lieu of the RCU protection.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-7-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

As the conversion between idle-barrier and full i915_active_fence is
already serialised by explicit memory barriers, we can reduce the
spinlock in i915_active_acquire_preallocate_barrier() for finding an
idle-barrier to reuse to an RCU read lock to ensure the fence remains
valid, only taking the spinlock for the update of the rbtree itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-6-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Rather than require the next timeline after idling to match the MRU
before idling, reset the index on the node and allow it to match the
first request. However, this requires cmpxchg(u64) and so is not trivial
on 32b, so for compatibility we just fallback to keeping the cached node
pointing to the MRU timeline.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-5-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Whenever an i915_active idles, we prune its tree of old fence slots to
prevent a gradual leak should it be used to track many, many timelines.
The downside is that we then have to frequently reallocate the rbtree.
A compromise is that we keep the most recently used fence slot, and
reuse that for the next active reference as that is the most likely
timeline to be reused.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-4-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Sometimes we have to be very careful not to allocate underneath a mutex
(or spinlock) and yet still want to track activity. Enter
i915_active_acquire_for_context(). This raises the activity counter on
i915_active prior to use and ensures that the fence-tree contains a slot
for the context.

v2: Refactor active_lookup() so it can be called again before/after
locking to resolve contention. Since we protect the rbtree until we
idle, we can do a lockfree lookup, with the caveat that if another
thread performs a concurrent insertion, the rotations from the insert
may cause us to not find our target. A second pass holding the treelock
will find the target if it exists, or the place to perform our
insertion.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-3-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

If no active callback is defined for i915_active, we do not need to
serialise its enabling with the mutex. We still do only want to call the
debug activate once, and must still serialise with a concurrent retire.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-2-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Since we pass around encoded parameters to the kernel context
constructor using the ce->timeline pointer, we can no longer assert that
it should be zero for mock timeline construction.

Fixes: d1bf5dd8 ("drm/i915/gt: Support multiple pinned timelines")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731102206.6793-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updated Fixes: link after rebasing and reordering into drm-intel-gt-next branch]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

We need to ensure that the list is valid prior to marking the node as
retrievable, otherwise we may see two threads compete over the same node
in intel_gt_get_buffer_pool(). If the first thread acquires and releases
the node in the same jiffie, the second thread may then acquire it (as
the jiffie now again matches the expected value) and claim the node
before it is put back into the list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730134049.8822-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

We may need to allocate more than one pinned context/timeline for each
engine which can utilise the per-engine HWSP, so we need to give each
a different offset within it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730183906.25422-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: NCQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa38 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

A last minute change, that unfortunately broke CI so badly it declared
SUCCESS, was to refactor the debug free all buffer pool code to reuse
the normal worker, inverted the termination condition so that it instead
of discarding the nodes, they were all declared young enough and
eligible for reuse.

Fixes: 06b73c2d ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729110756.2344-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updating Fixes: link after rebasing and reordering into drm-intel-gt-next]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Before we peek at the barrier status for an assert, first serialise with
its callbacks so that we see a stable value.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NThomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728153325.28351-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Some very low hanging fruit, but contention on the pool->lock is
noticeable between intel_gt_get_buffer_pool() and pool_retire(), with
the majority of the hold time due to the locked list iteration. If we
make the node itself RCU protected, we can perform the search for an
suitable node just under RCU, reserving taking the lock itself for
claiming the node and manipulating the list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729080245.8070-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Unlike rcs where we have conclusive evidence from our selftesting that
disabling the preparser before performing the TLB invalidate and
relocations does impact upon the GPU execution, the evidence for the
same requirement on xcs is much more circumstantial. Let's apply the
preparser disable between batches as we invalidate the TLB as a dose of
healthy paranoia, just in case.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2169Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152110.830-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

I915_GEM_THROTTLE dates back to the time before contexts where there was
just a single engine, and therefore a single timeline and request list
globally. That request list was in execution/retirement order, and so
walking it to find a particular aged request made sense and could be
split per file.

That is no more. We now have many timelines with a file, as many as the
user wants to construct (essentially per-engine, per-context). Each of
those run independently and so make the single list futile. Remove the
disordered list, and iterate over all the timelines to find a request to
wait on in each to satisfy the criteria that the CPU is no more than 20ms
ahead of its oldest request.

It should go without saying that the I915_GEM_THROTTLE ioctl is no
longer used as the primary means of throttling, so it makes sense to push
the complication into the ioctl where it only impacts upon its few
irregular users, rather than the execbuf/retire where everybody has to
pay the cost. Fortunately, the few users do not create vast amount of
contexts, so the loops over contexts/engines should be concise.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152010.30701-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

We include a tasklet flush before waiting on a request as a precaution
against the HW being lax in event signaling. We now have a precautionary
flush in the engine's heartbeat and so do not need to be quite so
zealous on every request wait. If we focus on the request, the only
tasklet flush that matters is if there is a delay in submitting this
request to HW, so if the request is not ready to be executed, no
advantage in reducing this wait can be gained by running the tasklet.
And there is little point in doing busy work for no result.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715115147.11866-10-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Since we assert that the kernel_context is using the perma-pinned HWSP,
make it so.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2179Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715155858.16410-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently, we use i915_request_completed() directly in
i915_request_wait() and follow up with a manual invocation of
dma_fence_signal(). This appears to cause a large number of contentions
on i915_request.lock as when the process is woken up after the fence is
signaled by an interrupt, we will then try and call dma_fence_signal()
ourselves while the signaler is still holding the lock.
dma_fence_is_signaled() has the benefit of checking the
DMA_FENCE_FLAG_SIGNALED_BIT prior to calling dma_fence_signal() and so
avoids most of that contention.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716100754.5670-1-chris@chris-wilson.co.ukSigned-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

There is a spelling mistake in a drm_warn message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826084727.42703-1-colin.king@canonical.com

Print an error message inside ps8640_bridge_vdo_control() function when
it fails so we can simplify a bit the callers, they will only need to
check the error code.
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NBilal Wasim <bwasim.lkml@gmail.com>
Tested-by: NBilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com

Bridge drivers that implement the new model only shall return an error
from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
is not set. So make sure we return an error because only the new
drm_bridge model is supported.
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NBilal Wasim <bwasim.lkml@gmail.com>
Tested-by: NBilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com

The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com

In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NBilal Wasim <bwasim.lkml@gmail.com>
Tested-by: NBilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com

Use drm_err instead of DRM_ERROR in hibmc_drm_drv
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-5-git-send-email-tiantao6@hisilicon.com

Use drm_err instead of DRM_ERROR in hibmc_drm_de
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-4-git-send-email-tiantao6@hisilicon.com

Use drm_err instead of DRM_ERROR in hibmc_drm_vdac
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-3-git-send-email-tiantao6@hisilicon.com

Use drm_err instead of DRM_ERROR in hibmc_ttm.
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-2-git-send-email-tiantao6@hisilicon.com

Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

This is always calculated the same, and only used in a couple of places.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-2-airlied@gmail.com

The drivers all do the same thing here.

Reviewed-by: Christian König <christian.koenig@amd.com> for both.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-1-airlied@gmail.com

If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr,
then a null pointer dereference is accessed.

The patch adds checking of the return value of ge_b850v3_lvds_init().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NNadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru

passing zero to 'PTR_ERR'
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NVinay Simha BN <simhavcs@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1597557042-5154-1-git-send-email-simhavcs@gmail.com

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: NTom Rix <trix@redhat.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Values come from the vendor and have been tested on hardware.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid

This patch implements WA for AM65xx erratum i2000, which causes YUV
formats to show wrong colors.

An earlier patch removed a partial WA:

a8d9d7da ("drm/tidss: remove AM65x PG1 YUV erratum code")

The patch explains the reasoning for removal. The change in plans has
been that it has become clear that there are and will be users for PG1
SoCs and as such it's good to implement the WA for PG1s.

This patch adds the WA back so that it is only used on SR1.0 (which is
the new name for PG1). The previous WA code didn't check the SoC
revision, which this patch does.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.comReviewed-by: NJyri Sarha <jsarha@ti.com>

There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805102015.14891-1-colin.king@canonical.com

The OMAP DRM driver includes <linux/gpio.h> into the two
hdmi4.c and hdmi5.c files but does not use any symbols from
these files. Drop the includes.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org

Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.

We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.

Fix comparisons in order to properly deny access with
associated commands.

v2: fix lri with correct mask (Chris)

References: 926abff2 ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: NNicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com

netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.

Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.

Fixes: b3bf5666 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>