提交 1da6df85 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: dsa: b53: Implement ARL add/del/dump operations

Adds support for FDB add/delete/dump using the ARL read/write logic and
the ARL search logic for faster dumps. The code is made flexible enough
it could support devices with a different register layout like BCM5325
and BCM5365 which have fewer number of entries or pack values into a
single 64 bits register.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 0830c980
......@@ -26,7 +26,9 @@
#include <linux/module.h>
#include <linux/platform_data/b53.h>
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <net/dsa.h>
#include <net/switchdev.h>
#include "b53_regs.h"
#include "b53_priv.h"
......@@ -777,6 +779,246 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
}
}
/* Address Resolution Logic routines */
static int b53_arl_op_wait(struct b53_device *dev)
{
unsigned int timeout = 10;
u8 reg;
do {
b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
if (!(reg & ARLTBL_START_DONE))
return 0;
usleep_range(1000, 2000);
} while (timeout--);
dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
return -ETIMEDOUT;
}
static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
{
u8 reg;
if (op > ARLTBL_RW)
return -EINVAL;
b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
reg |= ARLTBL_START_DONE;
if (op)
reg |= ARLTBL_RW;
else
reg &= ~ARLTBL_RW;
b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
return b53_arl_op_wait(dev);
}
static int b53_arl_read(struct b53_device *dev, u64 mac,
u16 vid, struct b53_arl_entry *ent, u8 *idx,
bool is_valid)
{
unsigned int i;
int ret;
ret = b53_arl_op_wait(dev);
if (ret)
return ret;
/* Read the bins */
for (i = 0; i < dev->num_arl_entries; i++) {
u64 mac_vid;
u32 fwd_entry;
b53_read64(dev, B53_ARLIO_PAGE,
B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
b53_read32(dev, B53_ARLIO_PAGE,
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
if (!(fwd_entry & ARLTBL_VALID))
continue;
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
*idx = i;
}
return -ENOENT;
}
static int b53_arl_op(struct b53_device *dev, int op, int port,
const unsigned char *addr, u16 vid, bool is_valid)
{
struct b53_arl_entry ent;
u32 fwd_entry;
u64 mac, mac_vid = 0;
u8 idx = 0;
int ret;
/* Convert the array into a 64-bit MAC */
mac = b53_mac_to_u64(addr);
/* Perform a read for the given MAC and VID */
b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
/* Issue a read operation for this MAC */
ret = b53_arl_rw_op(dev, 1);
if (ret)
return ret;
ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
/* If this is a read, just finish now */
if (op)
return ret;
/* We could not find a matching MAC, so reset to a new entry */
if (ret) {
fwd_entry = 0;
idx = 1;
}
memset(&ent, 0, sizeof(ent));
ent.port = port;
ent.is_valid = is_valid;
ent.vid = vid;
ent.is_static = true;
memcpy(ent.mac, addr, ETH_ALEN);
b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
b53_write64(dev, B53_ARLIO_PAGE,
B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
b53_write32(dev, B53_ARLIO_PAGE,
B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
return b53_arl_rw_op(dev, 0);
}
static int b53_fdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
struct b53_device *priv = ds_to_priv(ds);
/* 5325 and 5365 require some more massaging, but could
* be supported eventually
*/
if (is5325(priv) || is5365(priv))
return -EOPNOTSUPP;
return 0;
}
static void b53_fdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
struct b53_device *priv = ds_to_priv(ds);
if (b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, true))
pr_err("%s: failed to add MAC address\n", __func__);
}
static int b53_fdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb)
{
struct b53_device *priv = ds_to_priv(ds);
return b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, false);
}
static int b53_arl_search_wait(struct b53_device *dev)
{
unsigned int timeout = 1000;
u8 reg;
do {
b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
if (!(reg & ARL_SRCH_STDN))
return 0;
if (reg & ARL_SRCH_VLID)
return 0;
usleep_range(1000, 2000);
} while (timeout--);
return -ETIMEDOUT;
}
static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
struct b53_arl_entry *ent)
{
u64 mac_vid;
u32 fwd_entry;
b53_read64(dev, B53_ARLIO_PAGE,
B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
b53_read32(dev, B53_ARLIO_PAGE,
B53_ARL_SRCH_RSTL(idx), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
}
static int b53_fdb_copy(struct net_device *dev, int port,
const struct b53_arl_entry *ent,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj))
{
if (!ent->is_valid)
return 0;
if (port != ent->port)
return 0;
ether_addr_copy(fdb->addr, ent->mac);
fdb->vid = ent->vid;
fdb->ndm_state = ent->is_static ? NUD_NOARP : NUD_REACHABLE;
return cb(&fdb->obj);
}
static int b53_fdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj))
{
struct b53_device *priv = ds_to_priv(ds);
struct net_device *dev = ds->ports[port].netdev;
struct b53_arl_entry results[2];
unsigned int count = 0;
int ret;
u8 reg;
/* Start search operation */
reg = ARL_SRCH_STDN;
b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
do {
ret = b53_arl_search_wait(priv);
if (ret)
return ret;
b53_arl_search_rd(priv, 0, &results[0]);
ret = b53_fdb_copy(dev, port, &results[0], fdb, cb);
if (ret)
return ret;
if (priv->num_arl_entries > 2) {
b53_arl_search_rd(priv, 1, &results[1]);
ret = b53_fdb_copy(dev, port, &results[1], fdb, cb);
if (ret)
return ret;
if (!results[0].is_valid && !results[1].is_valid)
break;
}
} while (count++ < 1024);
return 0;
}
static struct dsa_switch_driver b53_switch_ops = {
.tag_protocol = DSA_TAG_PROTO_NONE,
.setup = b53_setup,
......@@ -789,6 +1031,10 @@ static struct dsa_switch_driver b53_switch_ops = {
.adjust_link = b53_adjust_link,
.port_enable = b53_enable_port,
.port_disable = b53_disable_port,
.port_fdb_prepare = b53_fdb_prepare,
.port_fdb_dump = b53_fdb_dump,
.port_fdb_add = b53_fdb_add,
.port_fdb_del = b53_fdb_del,
};
struct b53_chip_data {
......@@ -798,6 +1044,7 @@ struct b53_chip_data {
u16 enabled_ports;
u8 cpu_port;
u8 vta_regs[3];
u8 arl_entries;
u8 duplex_reg;
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
......@@ -816,6 +1063,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM5325",
.vlans = 16,
.enabled_ports = 0x1f,
.arl_entries = 2,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
......@@ -824,6 +1072,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM5365",
.vlans = 256,
.enabled_ports = 0x1f,
.arl_entries = 2,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
......@@ -832,6 +1081,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM5395",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -843,6 +1093,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM5397",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -854,6 +1105,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM5398",
.vlans = 4096,
.enabled_ports = 0x7f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -865,6 +1117,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53115",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.vta_regs = B53_VTA_REGS,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -887,6 +1140,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53128",
.vlans = 4096,
.enabled_ports = 0x1ff,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -898,6 +1152,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM63xx",
.vlans = 4096,
.enabled_ports = 0, /* pdata must provide them */
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
......@@ -909,6 +1164,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53010",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -920,6 +1176,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53011",
.vlans = 4096,
.enabled_ports = 0x1bf,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -931,6 +1188,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53012",
.vlans = 4096,
.enabled_ports = 0x1bf,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -942,6 +1200,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53018",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -953,6 +1212,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.dev_name = "BCM53019",
.vlans = 4096,
.enabled_ports = 0x1f,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
......@@ -982,6 +1242,7 @@ static int b53_switch_init(struct b53_device *dev)
ds->drv = &b53_switch_ops;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_entries = chip->arl_entries;
break;
}
}
......
......@@ -24,6 +24,8 @@
#include <linux/phy.h>
#include <net/dsa.h>
#include "b53_regs.h"
struct b53_device;
struct b53_io_ops {
......@@ -81,6 +83,7 @@ struct b53_device {
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
int reset_gpio;
u8 num_arl_entries;
/* used ports mask */
u16 enabled_ports;
......@@ -296,6 +299,60 @@ static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
return ret;
}
struct b53_arl_entry {
u8 port;
u8 mac[ETH_ALEN];
u16 vid;
u8 is_valid:1;
u8 is_age:1;
u8 is_static:1;
};
static inline void b53_mac_from_u64(u64 src, u8 *dst)
{
unsigned int i;
for (i = 0; i < ETH_ALEN; i++)
dst[ETH_ALEN - 1 - i] = (src >> (8 * i)) & 0xff;
}
static inline u64 b53_mac_to_u64(const u8 *src)
{
unsigned int i;
u64 dst = 0;
for (i = 0; i < ETH_ALEN; i++)
dst |= (u64)src[ETH_ALEN - 1 - i] << (8 * i);
return dst;
}
static inline void b53_arl_to_entry(struct b53_arl_entry *ent,
u64 mac_vid, u32 fwd_entry)
{
memset(ent, 0, sizeof(*ent));
ent->port = fwd_entry & ARLTBL_DATA_PORT_ID_MASK;
ent->is_valid = !!(fwd_entry & ARLTBL_VALID);
ent->is_age = !!(fwd_entry & ARLTBL_AGE);
ent->is_static = !!(fwd_entry & ARLTBL_STATIC);
b53_mac_from_u64(mac_vid, ent->mac);
ent->vid = mac_vid >> ARLTBL_VID_S;
}
static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
const struct b53_arl_entry *ent)
{
*mac_vid = b53_mac_to_u64(ent->mac);
*mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK) << ARLTBL_VID_S;
*fwd_entry = ent->port & ARLTBL_DATA_PORT_ID_MASK;
if (ent->is_valid)
*fwd_entry |= ARLTBL_VALID;
if (ent->is_static)
*fwd_entry |= ARLTBL_STATIC;
if (ent->is_age)
*fwd_entry |= ARLTBL_AGE;
}
#ifdef CONFIG_BCM47XX
#include <linux/version.h>
......
......@@ -226,6 +226,70 @@
#define VTE_UNTAG_S 9
#define VTE_UNTAG (0x1ff << 9)
/*************************************************************************
* ARL I/O Registers
*************************************************************************/
/* ARL Table Read/Write Register (8 bit) */
#define B53_ARLTBL_RW_CTRL 0x00
#define ARLTBL_RW BIT(0)
#define ARLTBL_START_DONE BIT(7)
/* MAC Address Index Register (48 bit) */
#define B53_MAC_ADDR_IDX 0x02
/* VLAN ID Index Register (16 bit) */
#define B53_VLAN_ID_IDX 0x08
/* ARL Table MAC/VID Entry N Registers (64 bit)
*
* BCM5325 and BCM5365 share most definitions below
*/
#define B53_ARLTBL_MAC_VID_ENTRY(n) (0x10 * (n))
#define ARLTBL_MAC_MASK 0xffffffffffff
#define ARLTBL_VID_S 48
#define ARLTBL_VID_MASK_25 0xff
#define ARLTBL_VID_MASK 0xfff
#define ARLTBL_DATA_PORT_ID_S_25 48
#define ARLTBL_DATA_PORT_ID_MASK_25 0xf
#define ARLTBL_AGE_25 BIT(61)
#define ARLTBL_STATIC_25 BIT(62)
#define ARLTBL_VALID_25 BIT(63)
/* ARL Table Data Entry N Registers (32 bit) */
#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x08)
#define ARLTBL_DATA_PORT_ID_MASK 0x1ff
#define ARLTBL_TC(tc) ((3 & tc) << 11)
#define ARLTBL_AGE BIT(14)
#define ARLTBL_STATIC BIT(15)
#define ARLTBL_VALID BIT(16)
/* ARL Search Control Register (8 bit) */
#define B53_ARL_SRCH_CTL 0x50
#define B53_ARL_SRCH_CTL_25 0x20
#define ARL_SRCH_VLID BIT(0)
#define ARL_SRCH_STDN BIT(7)
/* ARL Search Address Register (16 bit) */
#define B53_ARL_SRCH_ADDR 0x51
#define B53_ARL_SRCH_ADDR_25 0x22
#define B53_ARL_SRCH_ADDR_65 0x24
#define ARL_ADDR_MASK GENMASK(14, 0)
/* ARL Search MAC/VID Result (64 bit) */
#define B53_ARL_SRCH_RSTL_0_MACVID 0x60
/* Single register search result on 5325 */
#define B53_ARL_SRCH_RSTL_0_MACVID_25 0x24
/* Single register search result on 5365 */
#define B53_ARL_SRCH_RSTL_0_MACVID_65 0x30
/* ARL Search Data Result (32 bit) */
#define B53_ARL_SRCH_RSTL_0 0x68
#define B53_ARL_SRCH_RSTL_MACVID(x) (B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10))
#define B53_ARL_SRCH_RSTL(x) (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10))
/*************************************************************************
* Port VLAN Registers
*************************************************************************/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册