- 04 11月, 2005 27 次提交
-
-
由 Takashi Iwai 提交于
Modules: ICE1724 driver Remove the restcition of sample rates on Revolution 7.1 board. This enables the low 8-44kHz sample rates. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added dummay obsoleted module options for backward compatibility (to reduce possible bugzilla entries :) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Intel8x0 driver Suppress the codec warnings during probing of codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Remove the code for supporting eight cards from the integrated controller drivers because There Can Be Only One controller of each type per mainboard. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Randy Dunlap 提交于
Modules: Sound Core,PCI drivers AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a location where that won't happen, enabling all device sub-menus to be presented together. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
This patch cleans last ac97 audio/modem codec interception in initialization procedures (ac97_mixer_new()) and removes obsolete SHARED_TYPE 'locking' which prevents from AMC codecs to function correctly. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
dev_class=SNDRV_PCM_CLASS_MODEM for all supported softmodem PCMs Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Glen Masgai 提交于
Modules: YMFPCI driver This patch adds a new mixer control called 'IEC958 Loop' which makes it possible to loop digital signals from S/PDIF-in to S/PDIF-out. Signed-off-by: NGlen Masgai <mimosius@gmx.de> Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: ALSA sequencer Remove the last parameter of snd_seq_timer_set_tick_resolution() because it is always one. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: RTC timer driver The check whether rtctimer_freq is a power of two can be done easier with a simple bit operation. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: RTC timer driver The rtc_inc variable is never used outside the interrupt handler, and is always one where it matters, so we can just remove it. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Move the usb_complete_callback() compatibility wrapper out of the kernel tree. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Move the usb_pipe_needs_resubmit() compatibility wrapper out of the kernel tree. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Add more comments about other device modes and unsupported devices to the Roland part of the quirks table. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Sasha Khapyorsky 提交于
Modules: au88x0 driver This patch extends au88x0 AC97 codec access procedures to handle multiple codecs properly. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation Added description for ALC260 codec models in hda-intel driver section. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver Added a new model 'fujitsu' to ALC260 config for Fujitsu S7020. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Simplify the handling of MIDI quirks by treating an interface without quirks as a QUIRK_MIDI_STANDARD_INTERFACE. This also fixes the bug where a MIDI_STANDARD quirk would not be recognized. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: CMIPCI driver If possible, use ports in the card's PCI port address range instead of the legacy ports. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Vinod G 提交于
Modules: HDA Intel driver This patch is to make the Intel HDA code work for NVIDIA azalia controller. Modified by Takashi Iwai <tiwai@suse.de> Signed-off-by: NVinod G. <vinodg@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec Fix a typo in the last patch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec - Fixed surround controls of CMI9761 (model 83) in update_jacks callback. - Clean up ad1888 and ad1985 update_jacks callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mikael Magnusson 提交于
Modules: EMU10K1/EMU10K2 driver Adds left and right front channel outputs using fxbus 8 and 9 and 'Front' playback and capture volume controls. Signed-off-by: NMikael Magnusson <mikma@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
set default flags. SGI-PV: 945242 SGI-Modid: xfs-linux-melb:xfs-kern:24292a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 03 11月, 2005 13 次提交
-
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Alexandre Oliva 提交于
This fixes the x86-64 find_[first|next]_zero_bit() function for the end-of-range case. It didn't test for a zero size, and the "rep scas" would do entirely the wrong thing. Signed-off-by: NAlexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nathan Scott 提交于
Cannot build XFS filesystem support as module with quota support. It works only when the XFS filesystem support is compiled into the kernel. Menuconfig prevents from setting CONFIG_XFS_FS=m and CONFIG_XFS_QUOTA=y. How to reproduce: configure the XFS filesystem with quota support as module. The resulting kernel won't have quota support compiled into xfs.ko. Fix: Changing the fs/xfs/Kconfig file from tristate to bool lets you configure the quota support to be compiled into the XFS module. The Makefile-linux-2.6 checks only for CONFIG_XFS_QUOTA=y. Signed-off-by: NDimitri Puzin <tristan-777@ddkom-online.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de> signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
This is now used to issue a delayed allocation flush before reporting quota, which allows the used space quota report to match reality. Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Linus Torvalds 提交于
-
由 Yingping Lu 提交于
and leaf blocks. The problem cam from xfsqa test 117. SGI-PV: 940655 SGI-Modid: xfs-linux:xfs-kern:201527a Signed-off-by: NYingping Lu <yingping@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Russell King 提交于
This patch adds the infrastructure to support hotplug CPU on ARM platforms. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Use *cpus_addr() to display the mask of pending/to be called CPUs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-