kernel_fpu_begin/_end() are already called inside dcn20_resource_construct,
and calling kernel_fpu_begin/_end() recursively triggers WARN_ON() when
CONFIG_X86_DEBUG_FPU is enabled.

[  107.060434] WARNING: CPU: 6 PID: 1370 at arch/x86/kernel/fpu/core.c:90 kernel_fpu_begin+0xbd/0xe0
<snip>
[  107.268197] Call Trace:
[  107.270751]  dcn20_patch_bounding_box+0x17/0x100 [amdgpu]
[  107.276204]  init_soc_bounding_box+0x1b3/0x5f0 [amdgpu]
[  107.281536]  ? _cond_resched+0x19/0x30
[  107.285307]  dcn20_resource_construct+0x3a9/0xa90 [amdgpu]
[  107.290957]  ? dcn20_resource_construct+0x3a9/0xa90 [amdgpu]
[  107.296621]  ? __alloc_pages_nodemask+0x16a/0x330
[  107.301476]  ? _cond_resched+0x19/0x30
[  107.305284]  ? kmem_cache_alloc_trace+0x197/0x230
[  107.310063]  ? _cond_resched+0x19/0x30
[  107.313783]  ? kmem_cache_alloc_trace+0x197/0x230
[  107.318691]  dcn20_create_resource_pool+0x42/0x70 [amdgpu]
[  107.324315]  dc_create_resource_pool+0x12d/0x170 [amdgpu]
[  107.329851]  dc_create+0x1b8/0x6a0 [amdgpu]
[  107.334013]  ? kmem_cache_alloc_trace+0x1e2/0x230
[  107.338832]  amdgpu_dm_init+0x13e/0x1c0 [amdgpu]
<snip>
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCN21 and DCN2 extended timeout support cap is not set correctly.

[How]
Set extended timeout support for ASIC families to their right values.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHugo Hu <hugo.hu@amd.com>
Reviewed-by: NAbdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The earlier change: "check phy dpalt lane count config"
uses link encoder registers not defined properly.
That caused regression with mst-enabled display not
lighting up.

[How]
Add missing reg definitions.
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dc20 containes several FPU-dependent functions without proper FPU
kernel mode enable/disable wrappers.  Add the required wrappers
for both x86 and POWER.

This enables Navi DC20 support for POWER systems.

v2: fix compilation
Signed-off-by: NTimothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce DC_FP_START()/DC_FP_END() macros to help enable floating
point kernel mode support across various architectures.

v2: move copyright update to commit which adds the changes
Signed-off-by: NTimothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

An initialization was added for two optional struct members.  One of
these is always present in the dcn20_resource file, but the other one
depends on CONFIG_DRM_AMD_DC_DSC_SUPPORT and causes a build failure if
that is missing:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:926:14: error: excess elements in struct initializer [-Werror]
   .num_dsc = 5,

Add another #ifdef around the assignment.

Fixes: c3d03c5a ("drm/amd/display: Include num_vmid and num_dsc within NV14's resource caps")
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
On ASICs where number of DSCs is the same as OPPs there's no need
for DSC resource management. Mappping 1-to-1 fixes mode-set- or S3-
-related issues for such platforms.

[how]
Map DSC resources 1-to-1 to pipes only if number of OPPs is the same
as number of DSCs. This will still keep other ASICs working.
A follow-up patch to fix mode-set issues on those ASICs will be
required if testing shows issues with mode set.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In preparation for further changes
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
add_dsc_to_stream_resource could be called for validation.
Failing validation is completely fine.
However failing it inside commit streams is bad.
This code could be triggered for both contexts.
The function itself cannot distinguish the caller, which
makes it impossible to output the log only in the
meaningful case (commit streams).
Signed-off-by: NWenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
On ASICs where number of DSCs is the same as OPPs there's no need
for DSC resource management. Mappping 1-to-1 fixes mode-set- or S3-
-related issues for such platforms.

[how]
Map DSC resources 1-to-1 to pipes only if number of OPPs is the same
as number of DSCs. This will still keep other ASICs working.
A follow-up patch to fix mode-set issues on those ASICs will be
required if testing shows issues with mode set.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV10/14 has released. Its time to get NV10/14 bounding box
directly from code.

[How]
Retrieve NV10/14 bounding box data directly from code.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV14 is using its own ip params that's different from other
DCN2.0 ASICs.

[How]
Add ASIC revision check to make sure NV14 gets correct
ip params.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV14 IP Parameters are missing.

[How]
Add IP Parameters in.
Signed-off-by: NZhan liu <zhan.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
"num_vmid" and "num_dsc" are missing within NV14's resource caps structure.

[How]
Add the missing parts.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV14 is using its own ip params that's different from other
DCN2.0 ASICs.

[How]
Add ASIC revision check to make sure NV14 gets correct
ip params.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV14 IP Parameters are missing.

[How]
Add IP Parameters in.
Signed-off-by: NZhan liu <zhan.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
"num_vmid" and "num_dsc" are missing within NV14's resource caps structure.

[How]
Add the missing parts.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It is becoming increasingly hard to figure out which
function is called on the different DCN versions

[How]
1. Make function pointer table init in its own init.c file
2. Remove other scenarios in hwseq.c file that need to
include headers of other DCN versions. (If needed,
it should have been done via the function pointers)
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Too many construct functions which makes searching
difficult, especially on some debuggers.

[How]
Append all construct and destruct functions with dcn
number and object type to make each construct function
name unique
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Changes in dc to allow for different cases where full update is
required.
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

DCN21 is stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup Renoir definitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN21 code in the following files:
    * clk_mgr/clk_mgr.c: dc_clk_mgr_create()
    * core/dc_resources.c: dc_create_resource_pool()
    * gpio/hw_factory.c: dal_hw_factory_init()
    * gpio/hw_translate.c: dal_hw_translate_init()
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

DCN2 and DSC are stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup NV defninitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN2 code in the following files:
    * clk_mgr/clk_mgr.c: dc_clk_mgr_create()
    * core/dc_resources.c: dc_create_resource_pool()
    * dce/dce_dmcu.c: dcn20_*lock_phy()
    * dce/dce_dmcu.c: dcn20_funcs
    * dce/dce_dmcu.c: dcn20_dmcu_create()
    * gpio/hw_factory.c: dal_hw_factory_init()
    * gpio/hw_translate.c: dal_hw_translate_init()
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Need it for some OEM I2C devices in Nv10

[how]
Link up code to parse OEM table and expose DC interface
to access the pins
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
It has been a useful option in debugging GFXOFF and P.State Change issues.
May be required as for platform specific workaround.

[HOW]
Create option in enum dc_debug_options, "disable_vactive_clock_change".
When it is set, dm_dram_clock_change_vactive, will translate into
p_state_change_support: false.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.

[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.

[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DWB (Display Writeback) flag needs to be enabled as 1, or system
will throw out a few warnings when creating dcn20 resource pool.
Also, Navi14's dwb setting needs to match Navi10's,
which has already been set to 1.

[How]
Change value of num_dwb from 0 to 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DWB (Display Writeback) flag needs to be enabled as 1, or system
will throw out a few warnings when creating dcn20 resource pool.
Also, Navi14's dwb setting needs to match Navi10's,
which has already been set to 1.

[How]
Change value of num_dwb from 0 to 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Fix the programming of DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_A.
Was not filled in.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We are currently incorrectly processing avoid split at highest
voltage level.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
force_single_disp_pipe_split is a debug flag for use on DCN1
but isn't necessary otherwise as DCN2+ splits by default
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The enum value for TRANSMITTER_UNIPHY_G is 9. In resource dc_xx_resource
file structure link_enc_regs[], the TRANSMITTER_UNIPHY_G registers are
initialized at index 6. Due to this mismatch, if monitor is attached to
port using TRANSMITTER_UNIPHY_G then the monitor blanks out.

[How]
add function map_transmitter_id_to_phy_instance() and use the function
to map enum transmitter to link regs.
Signed-off-by: NYogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
NV12 has lower min dcfclk

[How]
Add update in update_bounding_box
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
DML is incorrectly initialized with 4 pipes on 3 pipe configs
RequiredDPPCLK is halved on unsplit pipe due to an incorrectly handled 3 pipe
case, causing underflow with 2 planes & pipe split (MPO, 8K + 2nd display)

[HOW]
Set correct number of DPP/OTGs for dml init to generate correct DPP topology
Double RequiredDPPCLK after clock is halved for pipe split
and find_secondary_pipe fails to fix underflow
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This value will be needed by dml and therefore should be externally
accessible.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

One of odm variables was not initialized in dml.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NTony Cheng <Tony.Cheng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Split a large function into smaller, reusable chunks.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit hints are unnecessary after front end programming redesign.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>