Some defines used by all agn devices, but the definitions were in
iwl-4965-hw.h, move those to iwl-agn-hw.h which is the better place for
those.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

Internal alias support has been present in module-init-tools for some
time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

In iwl_rx_queue_reset(), we didn't clear the rxq->queue[]. This might
cause the same rxb appears on multiple places in rxq->queue. Although
this won't cause any problem because of the read and write pointers
protection in rxq, we'd better clear it to avoid misleading.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

Removing irrelevant comments from iwl-agn.c
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

Module parameters used to be defined in both iwl-5000.c and iwl-4965.c,
after the code re-structure, merge into iwl-agn.c for easy to read and
maintenance.

Number of module parameters are deprecated after this merge. These are also
scheduled for removal by 2.6.40.

The current supported parameters are:

 parm: debug50:50XX debug output mask (deprecated) (uint)
 parm: debug:debug output mask (uint)
 parm: swcrypto50:using crypto in software (default 0 [hardware])
(deprecated) (bool)
 parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
 parm: queues_num50:number of hw queues in 50xx series (deprecated)
(int)
 parm: queues_num:number of hw queues. (int)
 parm: 11n_disable50:disable 50XX 11n functionality (deprecated) (int)
 parm: 11n_disable:disable 11n functionality (int)
 parm: amsdu_size_8K50:enable 8K amsdu size in 50XX series (deprecated)
(int)
 parm: amsdu_size_8K:enable 8K amsdu size (int)
 parm: fw_restart50:restart firmware in case of error (deprecated) (int)
 parm: fw_restart:restart firmware in case of error (int)
 parm: disable_hw_scan:disable hardware scanning (default 0) (int)

Remove "antenna" module parameter, it is not being used in "agn" driver.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

Commit bef5d1c7 split
ieee80211_drop_unencrypted() into separate functions that are used for
Data and Management frames. However, it did not handle the
RX_FLAG_DECRYPTED correctly for Management frames:
ieee80211_drop_unencrypted() can only return 0 for Management frames,
so there is no point in calling it here. Instead, just check the
status->flag directly.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

While ar9170's USB transport packet size is currently set to 8KiB,
the PHY is capable of receiving AMPDUs with up to 64KiB.
Such a large frame will be split over several rx URBs and
exceed the previously allocated space for rx stream reconstruction.

This patch increases the buffer size to 64KiB which is
in fact the phy & rx stream designed size limit.

Cc: stable@kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=15591Reported-by: NChristian Mehlis <mehlis@inf.fu-berlin.de>
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

to match use in IW_IOCTL_IDX macro
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

iw dev <devname> station del <MAC address> is quiet useful in mesh mode and should be possible.
Signed-off-by: NMarco Porsch <marco.porsch@siemens.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

mac80211 skips drop_unencrypted checks if the driver/firmware has
already taken care of this. In case of ath9k, we must not indicate
that the frame was decrypted if no decryption was actually done.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When selecting the RX key for group-addressed robust management
frames, we do not actually select any BIP key if the frame is
unprotected (since we cannot find the key index from MMIE). This
results in the drop_unencrypted check in failing to drop the frame. It
is enough to verify that we have a STA entry for the transmitter and
that MFP is enabled for that STA; we do not need to check rx->key
here. This fixes BIP processing for unprotected, group-addressed,
robust management frames.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

BIP (part of IEEE 802.11w) is only supposed to be used with
group-addressed frames. We ended up picking it as a default mechanism
for every management whenever we did not have a STA entry for the
destination (e.g., for Probe Response to a STA that is not
associated). While the extra MMIE in the end of management frames
should not break frames completed in most cases, there is no point in
doing this. Fix key selection to pick the default management key only
if the frame is sent to multicast/broadcast address and the frame is a
robust management frame.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When management frame protection (IEEE 802.11w) is used, the
deauthentication and disassociation frames must be protected whenever
the encryption keys are configured. We were removing the STA entry and
with it, the keys, just before actually sending out these frames which
meant that the frames went out unprotected. The AP will drop them in
such a case. Fix this by reordering the operations a bit so that
sta_info_destroy_addr() gets called only after
ieee80211_send_deauth_disassoc().
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Calculate a running average of the signal strength reported for Beacon
frames and indicate cqm events if the average value moves below or
above the configured threshold value (and filter out repetitive events
with by using the configured hysteresis).
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Set IEEE80211_HW_RX_INCLUDES_FCS to indicate that
the FCS is present in RX frames. Also, remove a redundant
assignment of skb length and include the FCS_LEN
when checking padding.

Fixing this issue makes TKIP work.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ath_tx_status and ath_rx_status data are only necessary for a short
time, until they have been processed and converted into mac80211 data
structures.
Because of that, it makes no sense to keep them tied to the DMA
descriptor, that only wastes precious memory.
This patch allocates the data on stack in the functions that call the
conversion functions from ath9k_hw.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch passes in a pointer to the ath_rx_status data structure for
functions that need it, instead of letting them grab it directly from
the ath_desc struct. This is useful for making it possible to allocate
the intermediate rx status data separately.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch passes in a pointer to the ath_tx_status data structure for
functions that need it, instead of letting them grab it directly from
the ath_desc struct. This is useful for making it possible to allocate
the intermediate tx status data separately.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When a scan watchdog is fired, try to send abort scan command
first before restarting the adapter. This avoids reconnection for
some users when scan hang is detected.

This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15419Reported-by: NMaurizio Avogadro <mavoga@gmail.com>
Tested-by: NMaurizio Avogadro <mavoga@gmail.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Not setting the opmode properly during initialization
results in the firmware sending up a bunch of packets
before add_interface() has been called, for the first
interface.

This patch fixes the issue by setting the initial mode
to 'managed'.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Stop/restart TX queues when the internal SKB
queue is full. This helps handle TX better
under heavy load.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch introduces the usage of URB anchors,
thus reducing a large amount of code dealing with
URB maintenance within the driver. The RX callback now
takes care of freeing the SKB associated with each URB.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Skip beyond the watchdog pattern properly.
This fixes occasional failure of the driver to load.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Accessing the sta pointer in TX completion without
approprate RCU protection is wrong. Fix this.

Also, RCU protection is needed when the station's
aggregation state is updated. Handle this properly.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The calculation of RX filter is fairly different
between ath9k and ath9k_htc, trying to make this
common between the two drivers would result in code churn.

While at it, remove the handling of PSPOLL filter,
it can be added when(if) AP support is added to ath9k_htc.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Enable QoS explicitly, when user space AP program will setup a QoS
queues. Currently this is not needed as iwlwifi not work in AP mode
and no other driver implement enable/disable QoS.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We activate/deactivate QoS and setup default queue parameters in iwlwifi
driver. Mac stack do the same, so we do not need repeat that work here.
Stack also will tell when disable QoS, this will fix driver when working
with older APs, that do not have QoS implemented.

Patch make "force = true" in iwl_active_qos() assuming we always want
to do with QoS what mac stack wish.

Patch also remove unused qos_cap bits, do not initialize qos_active = 0,
as we have it initialized to zero by kzalloc.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add interface to disable/enable QoS (aka WMM or WME). Currently drivers
enable it explicitly when ->conf_tx method is called, and newer disable.
Disabling is needed for some APs, which do not support QoS, such
we should send QoS frames to them.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Remove skb_linearize() in the iwlwifi drivers since
mac80211 supports paged rx SKBs now.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Mac80211 drivers can now pass paged SKBs to mac80211 via
ieee80211_rx{_irqsafe}. The implementation currently use
skb_linearize() in a few places i.e. management frame
handling, software decryption, defragmentation and A-MSDU
process. We will optimize them one by one later.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Cc: Kalle Valo <kalle.valo@iki.fi>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We do not want to partially change chanspec just to find out there is not
entry in table for given channel.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Taken from latest ralink linux driver(RT3070_LinuxSTA_V2.3.0.1_20100208)
All of them are RT3070 devices.
Signed-off-by: NXose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Taken from latest ralink linux driver, it's a RT3593 PCI/PCIe.
Signed-off-by: NXose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It was removed in the windows inf file by ralink.
And it isn't on ralink linux drivers.
Signed-off-by: NXose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Taken from ralink linux drivers:
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0B05,0x1784)}, /* Asus 3072 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x13D3,0x3305)}, /* AzureWave 3070*/
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x07D1,0x3C16)}, /* D-Link 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x203D,0x14A9)}, /* Encore 3070*/
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x1740,0x9707)}, /* EnGenius 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x1740,0x9708)}, /* EnGenius 3071 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x1740,0x9709)}, /* EnGenius 3072 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x04BB,0x0947)}, /* I-O DATA 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x04BB,0x0948)}, /* I-O DATA 3072 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x3822)}, /* MSI 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x3821)}, /* Ralink 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x3870)}, /* MSI 3070*/
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x3871)}, /* MSI 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x821A)}, /* Ralink 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x822A)}, /* MSI 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x870A)}, /* MSI 3070*/
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x871A)}, /* MSI 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DB0,0x899A)}, /* MSI 3070*/
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x20B8,0x8888)}, /* PARA INDUSTRIAL 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DF6,0x0048)}, /* Sitecom 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x0DF6,0x0047)}, /* Sitecom 3071 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x083A,0xA701)}, /* SMC 3070 */
RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c:        {USB_DEVICE(0x083A,0xA702)}, /* SMC 3072 */
Signed-off-by: NXose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>