提交 e3cf8b3f 编写于 作者: Z Zhu Yi 提交者: John W. Linville

mac80211: support paged rx SKBs

Mac80211 drivers can now pass paged SKBs to mac80211 via
ieee80211_rx{_irqsafe}. The implementation currently use
skb_linearize() in a few places i.e. management frame
handling, software decryption, defragmentation and A-MSDU
process. We will optimize them one by one later.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Cc: Kalle Valo <kalle.valo@iki.fi>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e58b1253
......@@ -1822,7 +1822,10 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw);
* ieee80211_rx - receive frame
*
* Use this function to hand received frames to mac80211. The receive
* buffer in @skb must start with an IEEE 802.11 header.
* buffer in @skb must start with an IEEE 802.11 header. In case of a
* paged @skb is used, the driver is recommended to put the ieee80211
* header of the frame on the linear part of the @skb to avoid memory
* allocation and/or memcpy by the stack.
*
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls to
......
......@@ -38,7 +38,7 @@ static struct sk_buff *remove_monitor_info(struct ieee80211_local *local,
{
if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) {
if (likely(skb->len > FCS_LEN))
skb_trim(skb, skb->len - FCS_LEN);
__pskb_trim(skb, skb->len - FCS_LEN);
else {
/* driver bug */
WARN_ON(1);
......@@ -227,6 +227,12 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb,
if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
present_fcs_len = FCS_LEN;
/* make sure hdr->frame_control is on the linear part */
if (!pskb_may_pull(origskb, 2)) {
dev_kfree_skb(origskb);
return NULL;
}
if (!local->monitors) {
if (should_drop_frame(origskb, present_fcs_len)) {
dev_kfree_skb(origskb);
......@@ -931,6 +937,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
return RX_DROP_MONITOR;
}
if (skb_linearize(rx->skb))
return RX_DROP_UNUSABLE;
/* Check for weak IVs if possible */
if (rx->sta && rx->key->conf.alg == ALG_WEP &&
ieee80211_is_data(hdr->frame_control) &&
......@@ -1231,6 +1240,9 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
}
I802_DEBUG_INC(rx->local->rx_handlers_fragments);
if (skb_linearize(rx->skb))
return RX_DROP_UNUSABLE;
seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
if (frag == 0) {
......@@ -1588,6 +1600,9 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
skb->dev = dev;
__skb_queue_head_init(&frame_list);
if (skb_linearize(skb))
return RX_DROP_UNUSABLE;
ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
rx->sdata->vif.type,
rx->local->hw.extra_tx_headroom);
......@@ -2357,29 +2372,42 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hdr *hdr;
__le16 fc;
struct ieee80211_rx_data rx;
int prepares;
struct ieee80211_sub_if_data *prev = NULL;
struct sk_buff *skb_new;
struct sta_info *sta, *tmp;
bool found_sta = false;
int err = 0;
hdr = (struct ieee80211_hdr *)skb->data;
fc = ((struct ieee80211_hdr *)skb->data)->frame_control;
memset(&rx, 0, sizeof(rx));
rx.skb = skb;
rx.local = local;
if (ieee80211_is_data(hdr->frame_control) || ieee80211_is_mgmt(hdr->frame_control))
if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc))
local->dot11ReceivedFragmentCount++;
if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
rx.flags |= IEEE80211_RX_IN_SCAN;
if (ieee80211_is_mgmt(fc))
err = skb_linearize(skb);
else
err = !pskb_may_pull(skb, ieee80211_hdrlen(fc));
if (err) {
dev_kfree_skb(skb);
return;
}
hdr = (struct ieee80211_hdr *)skb->data;
ieee80211_parse_qos(&rx);
ieee80211_verify_alignment(&rx);
if (ieee80211_is_data(hdr->frame_control)) {
if (ieee80211_is_data(fc)) {
for_each_sta_info(local, hdr->addr2, sta, tmp) {
rx.sta = sta;
found_sta = true;
......
......@@ -330,11 +330,18 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
if (iftype == NL80211_IFTYPE_MESH_POINT) {
struct ieee80211s_hdr *meshdr =
(struct ieee80211s_hdr *) (skb->data + hdrlen);
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
memcpy(dst, meshdr->eaddr1, ETH_ALEN);
memcpy(src, meshdr->eaddr2, ETH_ALEN);
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
dst, ETH_ALEN);
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr2),
src, ETH_ALEN);
}
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
}
break;
case cpu_to_le16(IEEE80211_FCTL_FROMDS):
......@@ -346,9 +353,14 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
if (iftype == NL80211_IFTYPE_MESH_POINT) {
struct ieee80211s_hdr *meshdr =
(struct ieee80211s_hdr *) (skb->data + hdrlen);
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
if (meshdr->flags & MESH_FLAGS_AE_A4)
memcpy(src, meshdr->eaddr1, ETH_ALEN);
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
src, ETH_ALEN);
hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
}
break;
case cpu_to_le16(0):
......@@ -357,7 +369,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
break;
}
if (unlikely(skb->len - hdrlen < 8))
if (!pskb_may_pull(skb, hdrlen + 8))
return -1;
payload = skb->data + hdrlen;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册