- 03 9月, 2018 3 次提交
-
-
由 Jiada Wang 提交于
Add warning message to rsnd_kctrl_accept_runtime(), when kctrl update is rejected due to corresponding dai-link is idle. So that user can notice the reason of kctrl update failure. Signed-off-by: NJiada Wang <jiada_wang@mentor.com> Signed-off-by: NTimo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstream] Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Andrew F. Davis 提交于
These devices support detecting and reporting short circuits across the output stages. Add support for reporting these issue. Do this by registering an interrupt if available and enabling this error to trigger that interrupt in the device. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning: ../sound/soc/soc-core.c:2918: warning: Excess function parameter 'legacy_dai_naming' description in 'snd_soc_register_dais' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 31 8月, 2018 25 次提交
-
-
由 Andrew F. Davis 提交于
The TAS6426 has a register that reports channel faults such as overcurrent and continuous DC output. Add reporting of this here. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Mark Brown 提交于
-
由 Andrew F. Davis 提交于
When there is no fault bit set in a fault register we skip the fault reporting section for that register. This also skips over saving that registers value. We save the value so we will not double report an error, but if an error clears then returns we will also not report it as we did not save the all cleared register value. Fix this by saving the fault register value in the all clear path. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
由 Andrew F. Davis 提交于
The current short version of the register name may be ambiguous when another fault register detection is added. Use the full name. While here fix comment about clearing faults, the CLEAR_FAULT register actually only clears sticky bits, which are only warnings, fault bits can only cleared by resolving the fault. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Now no simple/audio cards are using legacy dai_link style for platform. Let's remove compatible code. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-scu-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-scu-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card-util for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current struct snd_soc_dai_link is supporting multicodec, and it is supporting legacy style of codec_name codec_of_node code_dai_name This is handled as single entry of multicodec. We don't have multicpu support yet, but in the future we will. In such case, we can use snd_soc_dai_link_component for both cpu/codec. Then the code will be more simple and readble. As next step, we want to use it for platform, too. This patch adds snd_soc_dai_link_component style for platform. We might have multiplatform support in the future, but we don't know yet. To avoid un-known issue / complex code, this patch supports just single-platform as 1st step. If we could use snd_soc_dai_link_component for all CPU/Codec/Platform, we will switch to new style, and remove legacy code. This is prepare for it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Now no simple/audio cards are using legacy dai_link style for codec. Let's remove compatible code. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-scu-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
audi-graph-card and audio-graph-scu-card are very similar driver, but using different feature. Thus we are keeping synchronization on these 2 drivers style, because it is easy to confirm / check. Current big difference between these 2 drivers are "dai_props" on graph_card_data (= priv). It will be difficult to keep synchronize if we will add new feature on audio-graph-scu-card. Thus, this patch synchronize it. [audio-graph] struct graph_card_data { ... struct graph_dai_props { ... } *dai_props; ... }; [audio-graph-scu] struct graph_card_data { ... struct asoc_simple_dai *dai_props; ... }; Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-scu-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
simple-card and simple-scu-card are very similar driver, but using different feature. Thus we are keeping synchronization on these 2 drivers style, because it is easy to confirm / check. Current big difference between these 2 drivers are "dai_props" on simple_card_data (= priv). It will be difficult to keep synchronize if we will add new feature on simple-scu-card. Thus, this patch synchronize it. [simple] struct simple_card_data { ... struct simple_dai_props { ... } *dai_props; ... }; [simple scu] struct simple_card_data { ... struct asoc_simple_dai *dai_props; ... }; Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple_card_utils for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Matt Flax 提交于
This patch adds a S/PDIF enable switch as a SOC_SINGLE. Signed-off-by: NMatt Flax <flatmax@flatmax.org> Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Matt Flax 提交于
The cs4265 uses 32 bit transport on the I2S bus. This patch enables native 32 bit mode for machine drivers which use this sound card driver. Signed-off-by: NMatt Flax <flatmax@flatmax.org> Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Matt Flax 提交于
The cs4265 driver declares the "MMTLR Data Switch" register setting with a 0 register value rather then the 0x12 register (CS4265_SPDIF_CTL2). This incorrect value causes alsamixer to fault with the output : cannot load mixer controls: Input/output error This patch corrects the register value. alsamixer now runs. Signed-off-by: NMatt Flax <flatmax@flatmax.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Andreas Dannenberg 提交于
Unlike the TAS5720, the TAS5722 can be configured to utilize 16-bit wide slots in TDM mode. This can help easing audio clocking/frequency requirements. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Andreas Dannenberg 提交于
The TAS5722 supports modifying volume in 0.25dB steps (as opposed to 0.5dB steps on the TAS5720). Introduce a custom mixer control that allows taking advantage of this finer output volume granularity. Also add custom getters/setters for access as the TAS5722 digital volume controls are split over two registers. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Peter Ujfalusi 提交于
McASP have write and read FIFO, each 64 words deep. From the WFIFOS/RFIFOS registers we can read the amount of data currently in the FIFO which can be directly reported as delay. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 30 8月, 2018 2 次提交
-
-
由 Mark Brown 提交于
ALSA: Move hda_codec.h to include/sound For easier sharing with ASoC.
-
由 Pierre-Louis Bossart 提交于
As suggested by Takashi, move this header file to make it easier to include from e.g. the Intel Skylake driver in follow-up patches Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 29 8月, 2018 10 次提交
-
-
由 Jerome Brunet 提交于
Add pdm input driver for the device found on the amlogic AXG SoC family Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jerome Brunet 提交于
Add the DT binding documentation for axg's PDM input Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jerome Brunet 提交于
Before this patch the only alias provided by the dmic module is: alias: platform:dmic-codec Device instantiated from DT will not probe automatically with this After this patch, here is the new alias list: alias: platform:dmic-codec alias: of:N*T*Cdmic-codecC* alias: of:N*T*Cdmic-codec Now the dmic codec probes automatically when instantiated from DT. Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jerome Brunet 提交于
Add Kconfig prompt for the generic digital mic to make it configurable through menuconfig Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Robert Rosengren 提交于
adau17x1_setup_firmware and adau17x1_has_dsp is only used internally, so making them static instead of exported. Signed-off-by: NRobert Rosengren <robertr@axis.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kirill Marinushkin 提交于
Modified some if-statements to make them more clear Signed-off-by: NKirill Marinushkin <kmarinushkin@birdec.tech> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kirill Marinushkin 提交于
Modified the complete file comments in C++ style, to make them look more intentional Signed-off-by: NKirill Marinushkin <kmarinushkin@birdec.tech> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Peter Rosin 提交于
Convert to // comments in the leading comment, drop the boilerplate license text and use the correct MODULE_LICENSE. Signed-off-by: NPeter Rosin <peda@axentia.se> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Akshu Agrawal 提交于
25Mhz MCLK which was earlier used was of spread type. Thus, we were not getting accurate rate. The 48Mhz system clk is of non-spread type and we are changing to it to get accurate rate. Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Akshu Agrawal 提交于
We support dual channel, 48Khz. This constraint was set only for da7219. It is being extended to DMIC and MAX98357a. Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-