- 04 3月, 2016 5 次提交
-
-
由 Lada Trimasova 提交于
Since ezchip network driver is written with big endian EZChip platform it is necessary to add support for little endian architecture. The first issue is that the order of the bits in a bit field is implementation specific. So all the bit fields are removed. Named constants are used to access necessary fields. And the second one is that network byte order is big endian. For example, data on ethernet is transmitted with most-significant octet (byte) first. So in case of little endian architecture it is important to swap data byte order when we read it from register. In case of unaligned access we can use "get_unaligned_be32" and in other case we can use function "ioread32_rep" which reads all data from register and works either with little endian or big endian architecture. And then when we are going to write data to register we need to restore byte order using the function "put_unaligned_be32" in case of unaligned access and in other case "iowrite32_rep". The last little fix is a space between type and pointer to observe coding style. Signed-off-by: NLada Trimasova <ltrimas@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tal Zilcer <talz@ezchip.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The new NET_DEVLINK infrastructure can be a loadable module, but the drivers using it might be built-in, which causes link errors like: drivers/net/built-in.o: In function `mlx4_load_one': :(.text+0x2fbfda): undefined reference to `devlink_port_register' :(.text+0x2fc084): undefined reference to `devlink_port_unregister' drivers/net/built-in.o: In function `mlxsw_sx_port_remove': :(.text+0x33a03a): undefined reference to `devlink_port_type_clear' :(.text+0x33a04e): undefined reference to `devlink_port_unregister' There are multiple ways to avoid this: a) add 'depends on NET_DEVLINK || !NET_DEVLINK' dependencies for each user b) use 'select NET_DEVLINK' from each driver that uses it and hide the symbol in Kconfig. c) make NET_DEVLINK a 'bool' option so we don't have to list it as a dependency, and rely on the APIs to be stubbed out when it is disabled d) use IS_REACHABLE() rather than IS_ENABLED() to check for NET_DEVLINK in include/net/devlink.h This implements a variation of approach a) by adding an intermediate symbol that drivers can depend on, and changes the three drivers using it. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 09d4d087 ("mlx4: Implement devlink interface") Fixes: c4745500 ("mlxsw: Implement devlink interface") Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-03-01 Here's our main set of Bluetooth & 802.15.4 patches for the 4.6 kernel. - New Bluetooth HCI driver for Intel/AG6xx controllers - New Broadcom ACPI IDs - LED trigger support for indicating Bluetooth powered state - Various fixes in mac802154, 6lowpan and related drivers - New USB IDs for AR3012 Bluetooth controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
I added this check in setup_tc to multiple drivers, if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) Unfortunately restricting to TC_H_ROOT like this breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test to only check the type to make it equivalent to the check before I broke it. With this the old instantiation continues to work. A good smoke test is to setup mqprio with, # tc qdisc add dev eth4 root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 0@0 1@1 2@2 3@3 4@4 5@5 6@6 7@7 Fixes: e4c6734e ("net: rework ndo tc op to consume additional qdisc handle paramete") Reported-by: NSingh Krishneil <krishneil.k.singh@intel.com> Reported-by: NJake Keller <jacob.e.keller@intel.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2016 35 次提交
-
-
由 Eric Engestrom 提交于
Left over from c24588af ("atl1c: using fixed TXQ configuration for l2cb and l1c") Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Engestrom 提交于
8cc785f6 ("net: ipv4: make the ping /proc code AF-independent") removed the code using it, but renamed this variable instead of removing it. Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Engestrom 提交于
3b766cd8 ("net/core: Add reading VF statistics through the PF netdevice") added that variable but it's never been used. Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: Cleanup and minor fixes This series sets FBMIN to 64 bytes for Chelsio's T6 series of adapters, check to replenish fl is revised, some code cleanup in cxgb4vf sge initialization code and removes dead code. This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ====================
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Function t4vf_wait_dev_ready() is already called in t4vf_prep_adapter(), no need to call it again in adap_init0(). Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds a new function t4vf_fl_pkt_align() and use the same in SGE initialization code to find out freelist packet alignment Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
T4 and T5 hardware will not coalesce Free List PCI-E Fetch Requests if the Host Driver provides more Free List Pointers than the Fetch Burst Minimum value. So if we set FBMIN to 64 bytes and the Host Driver supplies 128 bytes of Free List Pointer data, the hardware will issue two 64-byte PCI-E Fetch Requests rather than a single coallesced 128-byte Fetch Request. T6 fixes this. So, for T4/T5 we set the FBMIN value to 128 Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Use freelist capacity instead of freelist size while checking, if freelist needs to be refilled Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexandre TORGUE says: ==================== stmmac: enhance driver performances and update the version According to Giuseppe, I send the v3 series. This is a subset of patches to rework the driver in order to improve its performances and make it more robust under stress conditions. All patches have been ported on STi mainstream kernel branch and tested on ARM STiH4xx platforms and newer ones. This series also updates the driver version and prepares it to include further development to support new chips. In detail, these patches are: o to rework and improve the internal DMA bus settings Fine tuning is mandatory on some platforms for both performance and stability issues. o to rework and optimize the descriptor management. This will help a lot on performance side and preparing the inclusion on the GMAC4.x. o to add a set of optimizations for both xmit and rx functions. These will help a lot on performance side and making the driver more robust in case of low memory conditions and under some stress test, performed for example on IP-STB. Below some throughput figures obtained on some boxes before and after the patches. nuttcp (mbps) iperf (Mbps) ------------------------------------------------------------------ tcp udp tcp udp tx rx tx rx tx rx tx rx ------------------------------------------ old 680 800 480 506 760 800 600 700 new 830 880 540 630 840 880 700 800 V2: - rx_copybreak is now managed by using ethtool. V3: - improve comments on PCIe detailing that there are no regressions - rework some APIs to properly define some params as bool as expected - rework the formula to get the element inside the ring. Comparing V2, patches 4 and 13 have been merged because the same formula have been used. After this rework, no evident benefit has been noticed in terms of performances so the table above is still valid. Disassembling the code for SH4 and ARM, with the new formula just an instr is saved (depending on compiler flags) and this gives us not so relevanti gain, for example, on SH4 where some instr are executed in the same pipeline stage. Ring sizes are now fixed and maybe they can be reworked to be tuned w/o using stmmaceth= cmdline option. Indeed, nobody change these sizes and indeed the numbers selected by default respect the budget and avoid to pass invalid setup. These are the best driver default sizes for ring and chain. ====================
-
由 Giuseppe Cavallaro 提交于
This patch just updates the driver to the version fully tested on STi platforms. This version is Oct_2015. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
There is a threshold now used to also limit the skb allocation when use zero-copy. This is to avoid that there are incoherence in the ring due to a failure on skb allocation under very aggressive testing and under low memory conditions. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch is to allow this driver to copy tiny frames during the reception process. This is giving more stability while stressing the driver on STi embedded systems. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabrice Gasnier 提交于
phy_bus_name can be NULL when "fixed-link" property isn't used. Then, since "stmmac: do not poll phy handler when attach a switch", phy_bus_name ptr needs to be checked before strcmp is called. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch avoids to call the stmmac_adjust_link when the driver is connected to a switch by using the FIXED_PHY support. Prior this patch the phydev->irq was set as PHY_POLL so periodically the phy handler was invoked spending useless time because the link cannot actually change. Note that the stmmac_adjust_link will be called just one time and this guarantees that the ST glue logic will be setup according to the mode and speed fixed. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch is to fill the first descriptor just before granting the DMA engine so at the end of the xmit. The patch takes care about the algorithm adopted to mitigate the interrupts, then it fixes the last segment in case of no fragments. Moreover, this new implementation does not pass any "ter" field when prepare the descriptors because this is not necessary. The patch also details the memory barrier in the xmit. As final results, this patch guarantees the same performances but fixing a case if small datagram are sent. In fact, this kind of test is impacted if no coalesce is done. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
The dirty index can be updated out of the loop where all the tx resources are claimed. This will help on performances too. Also a useless debug printk has been removed from the main loop. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabrice Gasnier 提交于
This patch "inline" get_tx_owner and get_ls routines. It Results in a unique read to tdes0, instead of three, to check TX_OWN and LS bits, and other status bits. It helps improve driver TX path by removing two uncached read/writes inside TX clean loop for enhanced descriptors but not for normal ones because the des1 must be read in any case. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch is to optimize the way to manage the TDES inside the xmit function. When prepare the frame, some settings (e.g. OWN bit) can be merged. This has been reworked to improve the tx performances. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabrice Gasnier 提交于
The RDES0 register can be read several times while doing RX of a packet. This patch slightly improves RX path performance by reading rdes0 once for two operation: check rx owner, get rx status bits. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
Optimize tx_clean by avoiding a des3 read in stmmac_clean_desc3(). In ring mode, TX, des3 seems only used when xmit a jumbo frame. In case of normal descriptors, it may also be used for time stamping. Clean it in the above two case, without reading it. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
last_segment field is read twice from dma descriptors in stmmac_clean(). Add last_segment to dma data so that this flag is from priv structure in cache instead of memory. It avoids reading twice from memory for each loop in stmmac_clean(). Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
Currently, the code pulls out the length field when unmapping a buffer directly from the descriptor. This will result in an uncached read to a dma_alloc_coherent() region. There is no need to do this, so this patch simply puts the value directly into a data structure which will hit the cache. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch is to rework the ring management now optimized. The indexes into the ring buffer are always incremented, and the entry is accessed via doing a modulo to find the "real" position in the ring. It is inefficient, modulo is an expensive operation. The formula [(entry + 1) & (size - 1)] is now adopted on a ring that is power-of-2 in size. Then, the number of elements cannot be set by command line but it is fixed. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch completely changes the descriptor layout to improve the whole performances due to the single read usage of the descriptors in critical paths. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch restructures the DMA bus settings and this is done by introducing a new platform structure used for programming the AXI Bus Mode Register inside the DMA module. This structure can be populated from device-tree as documented in the binding txt file. After initializing the DMA, the AXI register can be optionally tuned for platform drivers based. This patch also reworks some parameters to make coherent the DMA configuration now that AXI register is introduced. For example, the burst_len is managed by using the mentioned axi support above; so the snps,burst-len parameter has been removed. It makes sense to provide the AAL parameter from DT to Address-Aligned Beats inside the Register0 and review the PBL settings when initialize the engine. For PCI glue, rebuilding the story of this setting, it was added to align a configuration so not for fixing some known problem. No issue raised after this patch. It is safe to use the default burst length instead of tuning it to the maximum value Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This patch is to share the same reset procedure between dwmac100 and dwmac1000 chips. This will also help on enhancing the driver and support new chips. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Santosh Shilimkar says: ==================== RDS: Major clean-up with couple of new features for 4.6 v3: Re-generated the same series by omitting "-D" option from git format-patch command. Since first patch has file removals, git apply/am can't deal with it when formated with '-D' option. v2: Dropped module parameter from [PATCH 11/13] as suggested by David Miller Series is generated against net-next but also applies against Linus's tip cleanly. Entire patchset is available at below git tree: git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux.git for_4.6/net-next/rds_v2 The diff-stat looks bit scary since almost ~4K lines of code is getting removed. Brief summary of the series: - Drop the stale iWARP support: RDS iWarp support code has become stale and non testable for sometime. As discussed and agreed earlier on list, am dropping its support for good. If new iWarp user(s) shows up in future, the plan is to adapt existing IB RDMA with special sink case. - RDS gets SO_TIMESTAMP support - Long due RDS maintainer entry gets updated - Some RDS IB code refactoring towards new FastReg Memory registration (FRMR) - Lastly the initial support for FRMR RDS IB RDMA performance with FRMR is not yet as good as FMR and I do have some patches in progress to address that. But they are not ready for 4.6 so I left them out of this series. Also am keeping eye on new CQ API adaptations like other ULPs doing and will try to adapt RDS for the same most likely in 4.7+ timeframe. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Avinash Repaka 提交于
Fastreg MR(FRMR) is another method with which one can register memory to HCA. Some of the newer HCAs supports only fastreg mr mode, so we need to add support for it to have RDS functional on them. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NAvinash Repaka <avinash.repaka@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Fastreg MR(FRMR) memory registration and invalidation makes use of work request and completion queues for its operation. Patch allocates extra queue space towards these operation(s). Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Discovere Fast Memmory Registration support using IB device IB_DEVICE_MEM_MGT_EXTENSIONS. Certain HCA might support just FRMR or FMR or both FMR and FRWR. In case both mr type are supported, default FMR is used. Default MR is still kept as FMR against what everyone else is following. Default will be changed to FRMR once the RDS performance with FRMR is comparable with FMR. The work is in progress for the same. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add MR reuse statistics to RDS IB transport. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Drop the RDS connection on RDMA_CM_EVENT_TIMEWAIT_EXIT so that it can reconnect and resume. While testing fastreg, this error happened in couple of tests but was getting un-noticed. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Preperatory patch for FRMR support. From connection info, we can retrieve cm_id which contains qp handled needed for work request posting. We also need to drop the RDS connection on QP error states where connection handle becomes useful. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
No functional change. Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-