This patch extends the HiperSockets device driver to send and receive
af_iucv traffic over HiperSockets transport.
TX: Driver uses new asynchronous delivery of storage blocks to pass
    flow control/congestion information from the HiperSockets microcode
    to the af_iucv socket.
RX: Memory for incoming traffic is preallocated and passed to
    HiperSockets layer. If receiver is not capable to clean its buffers
    shared with HiperSockets and pass new memory to the HiperSockets
    layer this will cause flow control/congestion events on the
    sender.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NEinar Lueck <elelueck@de.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch exploits the QDIO support for asynchronous delivery of storage
blocks for Hipersockets. The exploitation is not configured per default and
may be enabled via the function qeth_configure_cq.
Signed-off-by: NEinar Lueck <elelueck@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures that signal adapter commands are issued if they are
indicated to be required.
Signed-off-by: NEinar Lueck <elelueck@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures that signal adapter commands are issued if they are
indicated to be required.
Signed-off-by: NEinar Lueck <elelueck@de.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces support for asynchronous delivery of storage blocks for
Hipersockets. Upper layers may exploit this functionality to reuse SBALs for
which the delivery status is still pending.
Signed-off-by: NEinar Lueck <elelueck@de.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current transport mechanism for af_iucv is the z/VM offered
communications facility IUCV. To provide equivalent support when
running Linux in an LPAR, HiperSockets transport is added to the
AF_IUCV address family. It requires explicit binding of an AF_IUCV
socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV
is announced. An af_iucv specific transport header is defined
preceding the skb data. A small protocol is implemented for
connecting and for flow control/congestion management.
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new ethertype for af_iucv over s/390 HiperSockets transport. Since
HiperSockets is not a real ethernet hw this is not an officially registered ID.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code cleanup making make use of local variable for struct iucv_sock.
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For future af_iucv extensions the module should be able to run in LPAR
mode too. For this we use the new dynamic loading iucv interface.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When adding HiperSockets transport to AF_IUCV Sockets, af_iucv either
depends on IUCV or QETH_L3 (or both). This patch introduces the
necessary changes for kernel configuration.
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a symbol to dynamically load iucv functions.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OSA cards can be configured to support 1 or 4 output queues. This
does not apply to HiperSockets. This patch limits determination of
the configured number of output queues to OSA cards only, but excludes
HiperSockets.
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In layer 3 mode IPv6 over VLAN does not work on newer OSA  levels in
case the sender and receiver run on the same (shared) OSA adapter.
Keep vlan info in the skb so the qdio header is filled with the
required vlan tag.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the move of the Ethernet drivers into drivers/net/ethernet/
there was some leftover cleanup to do in the Kconfig and Makefile.

Removed the 10/100, 1000, and 10GbE Kconfig menus.

Removed the out-dated pci-skeleton.c file which was used an
example driver.  With the current networking features and
structure, the file is no longer a good example to use for
driver creation.

CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Based on feedback from Alan Cox, the acenic driver moved to
drivers/net/ethernet/alteon/ and made the necessary Kconfig and
Makefile changes.

CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Tilera driver into drivers/net/ethernet/tile and
make the necessary Kconfig and Makefile changes.

Updated the Kconfig so that the options defualt to y if TILE kernel.

CC: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Xircom driver into drivers/net/ethernet/xircom/ and
make the necessary Kconfig and Makefile changes.

CC: <psheer@icon.co.za>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Renesas driver into drivers/net/ethernet/renesas/ and make
the necessary Kconfig and Makefile changes.

CC: Yoshihiro Shimoda <yoshihiro.shirmoda.uh@renesas.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the netx driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>

Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>

Move the Microchip driver into drivers/net/ethernet/microchip/ and
make the necessary Kconfig and Makefile changes.

CC: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/
and make the necessary Kconfig and Makefile changes.

CC: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Avionic driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Dave Ethernet driver into drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

CC: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the HP driver into drivers/net/ethernet/hp/ and
made the necessary Kconfig and Makefile changes.

CC: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make
the necessary Kconfig and Makefile changes.

CC: Ion Badulescu <ionut@badula.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the nForce driver into drivers/net/ethernet/nvidia/ and make
the necessary Kconfig and Makefile changes.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Myson driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Donald Becker <becker@scyld.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the RDC driver into drivers/net/ethernet/rdc/ and make the
necessary Kconfig and Makefile changes.

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Atmel driver into drivers/net/ethernet/cadence/ and
make the necessary Kconfig and Makefile changes.

CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and
make the necessary Kconfig and Makefile changes.

CC: <uclinux-dist-devel@blackfin.uclinux.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NBob Liu <bob.liu@analog.com>

Move the Lantiq driver into drivers/net/ethernet/ and the
necessary Kconfig and Makefile changes.

CC: John Crispin <blogic@openwrt.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NJohn Crispin <blogic@openwrt.org>

Move the MIPS drivers into drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the IDT driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes

CC: "IDT Inc." <rischelp@idt.com>
CC: Felix Fietkau <nbd@openwrt.org>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the IC Plus driver into drivers/net/ethernet/icplus/ and
make the necessary Kconfig and Makefile changes.

CC: <craig_rich@sundanceti.com>
CC: <sorbica@icplus.com.tw>
CC: <jesse@icplus.com.tw>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.

CC: John Williams <john.williams@petalogix.com>
CC: "David H. Lynch Jr." <dhlii@dlasys.net>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the JME driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Cavium driver to drivers/net/ethernet/octeon/ and
make the necessary Kconfig and Makefile changes.

CC: David Daney <david.daney@cavium.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NDavid Daney <david.daney@cavium.com>

Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.

CC: Donald Becker <becker@scyld.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and
make the necessary Kconfig and Makefile changes.

CC: Sriram <srk@ti.com>
CC: Vinay Hegde <vinay.hegde@ti.com>
CC: Cyril Chemparathy <cyril@ti.com>
CC: Samuel Chessman <chessman@tux.org>
CC: <torben.mathiasen@compaq.com>
CC: Eugene Konev <ejka@imfi.kspu.ru>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>