Enables NXP/FSL QorIQ IFC flash controller driver for NAND.  Enabled as
built-in to load RFS from nand flash without initramfs.

Remove CONFIG_MEMORY as it is selected by CONFIG_MTD_NAND_FSL_IFC.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables ARM generic SBSA compatible watchdog driver for NXP LX2160a SoC.
Enabled as built-in for it is a core feature.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables the generic QorIQ cpufreq driver to support frequency scaling
for various QorIQ SoCs.  Enabled as built-in as it is a core feature.

Remove CONFIG_CLK_QORIQ as it is seleted by CONFIG_QORIQ_CPUFREQ.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables SPI controller drivers used in various NXP/FSL SoCs.

QSPI is fast enough to connect big flash for file system.  It is used to
connect 512MB NAND flash and 256MB NOR flash on LS1028RDB.  It is used
as bootsource for other platforms like LS2080ardb too. Enabled as
built-in to load RFS from SPI flash without requiring initramfs.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables drivers for NXP ENETC Ethernet controller and FELIX Ethernet
switch used on QorIQ LS1028a SoC.

The ENETC ethernet drivers are enabled as built-in to boot from network
without an initramfs.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables drivers for NXP DPAA2 framework, related Ethernet and crypto
device which can be found on QorIQ SoCs like LS1088a, LS2088a and
LX2160a.

The framework and ethernet drivers are enabled as built-in to boot
from network without an initramfs.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables drivers for NXP DPAA1 framework and related Ethernet device which
can be found on QorIQ SoCs such as LS1043a and LS1046a.  They are enabled
as built-in to boot from network without an initramfs.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enables driver for FLEXCAN device which is used on a wide range of NXP
SoCs.  Also enabling the related CAN framework.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Used "make defconfig savedefconfig" to regenerate defconfig files in the
right order to prepare for additional defconfig changes.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_IMX8MM_THERMAL as module to support i.MX8MM
thermal driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This patch enables CONFIG_IMX_SC_THERMAL as module.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the PCIe Gen4 controller driver for Layerscape SoCs.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NMinghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_PINCTRL_IMX8MP by default to support i.MX8MP
pinctrl driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com

Currently used on the Raspberry Pi 4 and various Broadcom STB SoCs.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Since the Actions Semi platform has been enabled in defconfig, let's
also enable the relevant device drivers there.

Link: https://lore.kernel.org/r/20200114084348.25659-3-manivannan.sadhasivam@linaro.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

For now mainly used in the Raspberry Pi 4.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable Nvidia XUSB device mode controller driver and USB GPIO Based
Connection Detection Driver as module.
Signed-off-by: NNagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM.
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20191129213917.1301110-6-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable CONFIG_QCOM_CPR.
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20191129213917.1301110-5-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The high frequency pll is required on compatible Qualcomm SoCs to
support the CPU frequency scaling feature.
Co-developed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it
is currently not enabled by default.

This patch enables this as a module.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable
the driver for this.
Tested-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the type C fusb302 driver as module
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

QCOM_SPMI_ADC5 and SPMI_TEMP_ALARM expose thermistors on the PMIC of
several QCOM platforms through the thermal framework. Enable them.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/5f193f2a7508d82037e8f04e73150feee1a2583e.1575887866.git.amit.kucheria@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable PDC interrupt controller for SDM845 devices. The interrupt
controller can detect wakeup capable interrupts when the SoC is in a low
power state.
Signed-off-by: NLina Iyer <ilina@codeaurora.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the driver for the watchdog found in the application processor
subsystem on most modern Qualcomm platforms.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Most Qualcomm platforms contain a pseudo random number generator
hardware block. Enable the driver for this block and also enable the
interface for exposing this to userspace.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This enables display on the Lenovo Yoga C630 by connecting the DSI output
from the SoC to the eDP input of the panel.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This enables Bluetooth on the Lenovo Yoga C630.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on
many modern Qualcomm SoCs. Enable the driver for this hardware block to
enable this functionality on the SDM845 platform.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm socinfo driver provides SoC information to userspace using
the standard soc interface as well as a number of debugfs entries.

Enable this to allow certain user space tools to acquire this
information, as well as getting developers access to the information in
debugfs that is useful when reporting bugs.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the drivers for GENI SPI and QSPI controllers found on the
Qualcomm SDM845 platform, among others.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.

None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Tested-by: NAlex Elder <elder@linaro.org>
Tested-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.

Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.netSigned-off-by: NOlof Johansson <olof@lixom.net>

The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).

However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.

So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com

With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the Renesas R-Car M3-W+ (R8A77961) SoC in the ARM64 defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-11-geert+renesas@glider.be

This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>