This died many years ago as we now use i915_vma first and foremost.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115170835.1367869-1-chris@chris-wilson.co.uk

To keep things manageable, the pre-gen9 cmdparser does not
attempt to track any form of nested BB_START's. This did not
prevent usermode from using nested starts, or even chained
batches because the cmdparser is not strictly enforced pre gen9.

Instead, the existence of a nested BB_START would cause the batch
to be emitted in insecure mode, and any privileged capabilities
would not be available.

For Gen9, the cmdparser becomes mandatory (for BCS at least), and
so not providing any form of nested BB_START support becomes
overly restrictive. Any such batch will simply not run.

We make heavy use of backward jumps in igt, and it is much easier
to add support for this restricted subset of nested jumps, than to
rewrite the whole of our test suite to avoid them.

Add the required logic to support limited backward jumps, to
instructions that have already been validated by the parser.

Note that it's not sufficient to simply approve any BB_START
that jumps backwards in the buffer because this would allow an
attacker to embed a rogue instruction sequence within the
operand words of a harmless instruction (say LRI) and jump to
that.

We introduce a bit array to track every instr offset successfully
validated, and test the target of BB_START against this. If the
target offset hits, it is re-written to the same offset in the
shadow buffer and the BB_START cmd is allowed.

Note: This patch deliberately ignores checkpatch issues in the
cmdtables, in order to match the style of the surrounding code.
We'll correct the entire file in one go in a later patch.

v2: set dispatch secure late (Mika)
v3: rebase (Mika)
v4: Clear whitelist on each parse
    Minor review updates (Chris)
v5: Correct backward jump batching
v6: fix compilation error due to struct eb shuffle (Mika)

Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

In "drm/i915: Add support for mandatory cmdparsing" we introduced the
concept of mandatory parsing. This allows the cmdparser to be invoked
even when user passes batch_len=0 to the execbuf ioctl's.

However, the cmdparser needs to know the extents of the buffer being
scanned. Refactor the code to ensure the cmdparser uses the actual
object size, instead of the incoming length, if user passes 0.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.

For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.

Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.

Add the required paths to map the shadow buffer to ppgtt ro for Gen8+

v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.

In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.

Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.

v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.

Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.

Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.

v2: rebase (Mika)
v3: rebase (Mika)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

Split the legacy submission backend from the common CS ring buffer
handling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024100344.5041-1-chris@chris-wilson.co.uk

We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.

With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.

Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.

v2: Store preemption setting in intel_context (Chris)

v3: Use priorities to avoid preemption rather than the HW mechanism

v4: Just modify the port priority reporting function

v5: Add nopreempt flag on gem context and always flag requests
    appropriately, regarless of OA reconfiguration.

Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).

In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.

Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!

v2: Add some commentary, and some helpers to reduce patch churn.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk

A subset of 71724f70 ("drm/mm: Use helpers for drm_mm_node booleans")
in order to prepare drm-intel-next-queued for subsequent patches before
we can backmerge 71724f70 itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004142226.13711-1-chris@chris-wilson.co.uk

A straightforward conversion of assignment and checking of the boolean
state flags (allocated, scanned) into non-atomic bitops. The caller
remains responsible for all locking around the drm_mm and its nodes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-4-chris@chris-wilson.co.uk

In preparation for rearranging the booleans into a flags field, ensure
all the current users are using the inline helpers and not directly
accessing the members.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-3-chris@chris-wilson.co.uk

The CS pre-parser can pre-fetch commands across memory sync points and
starting from gen12 it is able to pre-fetch across BB_START and BB_END
boundaries as well, so when we emit gpu relocs the pre-parser might
fetch the target location of the reloc before the memory write lands.

The parser can't pre-fetch across the ctx switch, so we use a separate
context to guarantee that the memory is synchronized before the parser
can get to it.

Note that there is no risk of the CS doing a lite restore from the reloc
context to the user context, even if the two have the same hw_id,
because since gen11 the CS also checks the LRCA when deciding if it can
lite-restore.

v2: limit new context to gen12+, release in eb_destroy, add a comment
    in emit_fini_breadcrumb (Chris).
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827185805.21799-1-daniele.ceraolospurio@intel.com

A virtual engine itself does not have a batch pool, but we can gleefully
use any of its siblings instead.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827135935.3831-1-chris@chris-wilson.co.uk

Avoid calling i915_vma_put_fence() by using our alternate paths that
bind a secondary vma avoiding the original fenced vma. For the few
instances where we need to release the fence (i.e. on binding when the
GGTT range becomes invalid), replace the put_fence with a revoke_fence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk

When under severe stress for GTT mappable space, the LRU eviction model
falls off a cliff. We spend all our time scanning the much larger
non-mappable area searching for something within the mappable zone we can
evict. Turn this on its head by only using the full vma for the object if
it is already pinned in the mappable zone or there is sufficient *free*
space to accommodate it (prioritizing speedy reuse). If there is not,
immediately fall back to using small chunks (tilerow for GTT mmap, single
pages for pwrite/relocation) and using random eviction before doing a full
search.

Testcase: igt/gem_concurrent_blt
References: https://bugs.freedesktop.org/show_bug.cgi?id=110848Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821123234.19194-1-chris@chris-wilson.co.uk

Currently, we remove the from per-file request list for throttling and
retirement under a dedicated spinlock, but insertion is governed by
struct_mutex. This needs to be the same lock so that the
retirement/insertion of neighbouring requests (at the tail) doesn't
break the list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820080907.4665-1-chris@chris-wilson.co.uk

Make sure that when submitting requests, we always serialize against
potential vma moves and clflushes.

Time for a i915_request_await_vma() interface!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819112033.30638-1-chris@chris-wilson.co.uk

Forgo the struct_mutex requirement for request retirement as we have
been transitioning over to only using the timeline->mutex for
controlling the lifetime of a request on that timeline.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-4-chris@chris-wilson.co.uk

Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/

Objtool reports:

  drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable

__copy_from_user() already does both STAC and CLAC, so the
user_access_end() in its error path adds an extra unnecessary CLAC.

Fixes: 0b2c8f8b ("i915: fix missing user_access_end() in page fault exception case")
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com

Move the timeline from being inside the intel_ring to intel_context
itself. This saves much pointer dancing and makes the relations of the
context to its timeline much clearer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-4-chris@chris-wilson.co.uk

For the default I915_EXEC_BSD round robin selector, it may select any
available VCS engine. Make it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809091010.23281-3-chris@chris-wilson.co.uk

We keep a global seed for the legacy BSD round-robin selector, but in
our testing of multiple simultaneous client workloads, a random seed
spreads the load more evenly. (As even as an initial round-robin selector
can be!) Removing the global is one less variable we have to find a home
for!

We can simulate multi-client (both same and mixed workloads) using
igt/gem_wsim to work out optimal strategies and then compare our
simulation with the actual transcoder on multi-engine machines. This
fixed round-robin turns out to be one of the worst methods.

No user is advised to use this method; the current suggestion is to use
a virtual engine for agnostic batches, randomised submission or using
the busyness tracking to select the most idle engine at the time of
dispatch. At the present time, intel-media is explicit, but libva still
seems to use it, with the exception of batches that must execute on vcs0.
Oh well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809091010.23281-2-chris@chris-wilson.co.uk

To use the legacy BSD selector, you must have a second VCS engine, or
else the ABI simply maps the request for another engine onto VCS0.
However, we only checked a single VCS1 location and overlooking the
possibility of a sparse VCS set being mapped to the dense ABI.

v2: num_vcs_engines() turns out to be reusable and futureproof it so we
never have to worry about this silly bit of ABI again!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809123153.20574-1-chris@chris-wilson.co.uk

With its original name intel_drv.h the intel_display_types.h header was
superfluously cargo-cult included all over the place, while it's really
mostly about display internals. Remove the unnecessary includes.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e3d737f0ab87c55969e62c1e077e15c04c238297.1565085692.git.jani.nikula@intel.com

Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.

There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.

v2: fix the include guard name in the renamed file
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com

Switch to tracking activity via i915_active on individual nodes, only
keeping a list of retired objects in the cache, and reaping the cache
when the engine itself idles.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804124826.30272-2-chris@chris-wilson.co.uk

In the next patch, we would like to couple into the engine wakeref to
free the batch pool on idling. The caveat here is that we therefore want
to track the engine wakeref more precisely and to hold it instead of the
broader GT wakeref as we process the ioctl.

v2: Avoid introducing odd semantics for a shortlived timeline->mutex
acquisition interface.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804124826.30272-1-chris@chris-wilson.co.uk

Recently discovered in commit bdae33b8 ("drm/i915: Use maximum write
flush for pwrite_gtt") was that we needed to our full write barrier
before changing the GGTT PTE to ensure that our indirect writes through
the GTT landed before the PTE changed (and the writes end up in a
different page). That also applies to our GGTT relocation path.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: NPrathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730112151.5633-4-chris@chris-wilson.co.uk

Track the currently bound address space used by the HW context. Minor
conversions to use the local intel_context.vm are made, leaving behind
some more surgery required to make intel_context the primary through the
selftests.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-2-chris@chris-wilson.co.uk

Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk

Switch from passing the i915 container to newly named struct intel_gt.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-2-chris@chris-wilson.co.uk

This aligns better with the rest of restructuring.

v2:
 * Move call out of line. (Chris)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-24-tvrtko.ursulin@linux.intel.com

Now that we have a new subdirectory for display code, continue by moving
modesetting core code.

display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.

v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com

Make the kref common to both derived structs (i915_ggtt and i915_ppgtt)
so that we can safely reference count an abstract ctx->vm address space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk

Use i915_gem_object_lock() to guard the LUT and active reference to
allow us to break free of struct_mutex for handling GEM_CLOSE.

Testcase: igt/gem_close_race
Testcase: igt/gem_exec_parallel
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606112320.9704-1-chris@chris-wilson.co.uk

Use the per-object local lock to control the cache domain of the
individual GEM objects, not struct_mutex. This is a huge leap forward
for us in terms of object-level synchronisation; execbuffers are
coordinated using the ww_mutex and pread/pwrite is finally fully
serialised again.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-10-chris@chris-wilson.co.uk