The TC info will be updated in hclge_tm_vport_tc_info_update(),
so hclge_knic_setup() no need to do it again.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The number of queues for each enabled TC should range from 1 to
the maximum available value, and return directly if the value
is same as the current one.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provide a common interface to complete the back pressure settings
of all enabled TCs. So other functions directly call this interface
to complete the corresponding operation.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is already common interface for network device reinitialization,
so hns3_set_channels() should just call them.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The parameter passed to hns3_set_channels() are already the number of
queues per channel of the enabled TC, so it is not need to divide
the number of enabled TCs.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The irq_init_flag field in struct hns3_enet_ring is unnecessary.
This patch removes it.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the
reinitialization interface that will be called when the device reset,
the number of TC changed, or the queue length changed. So these two
function should call hns3_get_ring_config() and hns3_put_ring_config()
to allocate and free memory for the ring with the correct number.

Also this patch fixes a double free problem when
hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eran Ben Elisha says:

====================
Devlink health reporting and recovery system

The health mechanism is targeted for Real Time Alerting, in order to know when
something bad had happened to a PCI device
- Provide alert debug information
- Self healing
- If problem needs vendor support, provide a way to gather all needed debugging
  information.

The main idea is to unify and centralize driver health reports in the
generic devlink instance and allow the user to set different
attributes of the health reporting and recovery procedures.

The devlink health reporter:
Device driver creates a "health reporter" per each error/health type.
Error/Health type can be a known/generic (eg pci error, fw error, rx/tx error)
or unknown (driver specific).
For each registered health reporter a driver can issue error/health reports
asynchronously. All health reports handling is done by devlink.
Device driver can provide specific callbacks for each "health reporter", e.g.
 - Recovery procedures
 - Diagnostics and object dump procedures
 - OOB initial attributes
Different parts of the driver can register different types of health reporters
with different handlers.

Once an error is reported, devlink health will do the following actions:
  * A log is being send to the kernel trace events buffer
  * Health status and statistics are being updated for the reporter instance
  * Object dump is being taken and saved at the reporter instance (as long as
    there is no other dump which is already stored)
  * Auto recovery attempt is being done. Depends on:
    - Auto-recovery configuration
    - Grace period vs. time passed since last recover

The user interface:
User can access/change each reporter attributes and driver specific callbacks
via devlink, e.g per error type (per health reporter)
 - Configure reporter's generic attributes (like: Disable/enable auto recovery)
 - Invoke recovery procedure
 - Run diagnostics
 - Object dump

The devlink health interface (via netlink):
DEVLINK_CMD_HEALTH_REPORTER_GET
  Retrieves status and configuration info per DEV and reporter.
DEVLINK_CMD_HEALTH_REPORTER_SET
  Allows reporter-related configuration setting.
DEVLINK_CMD_HEALTH_REPORTER_RECOVER
  Triggers a reporter's recovery procedure.
DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE
  Retrieves diagnostics data from a reporter on a device.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET
  Retrieves the last stored dump. Devlink health
  saves a single dump. If an dump is not already stored by the devlink
  for this reporter, devlink generates a new dump.
  dump output is defined by the reporter.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR
  Clears the last saved dump file for the specified reporter.

                                               netlink
                                      +--------------------------+
                                      |                          |
                                      |            +             |
                                      |            |             |
                                      +--------------------------+
                                                   |request for ops
                                                   |(diagnose,
 mlx5_core                             devlink     |recover,
                                                   |dump)
+--------+                            +--------------------------+
|        |                            |    reporter|             |
|        |                            |  +---------v----------+  |
|        |   ops execution            |  |                    |  |
|     <----------------------------------+                    |  |
|        |                            |  |                    |  |
|        |                            |  + ^------------------+  |
|        |                            |    | request for ops     |
|        |                            |    | (recover, dump)     |
|        |                            |    |                     |
|        |                            |  +-+------------------+  |
|        |     health report          |  | health handler     |  |
|        +------------------------------->                    |  |
|        |                            |  +--------------------+  |
|        |     health reporter create |                          |
|        +---------------------------->                          |
+--------+                            +--------------------------+

In this patchset, mlx5e TX reporter is implemented.

v2:
- Remove FW* reporters to decrease the amount of patches in the patchset
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new file to add information about devlink health
mechanism.
Signed-off-by: NAya Levin <ayal@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this patch, ndo_tx_timeout callback will be redirected to the TX
reporter in order to detect a TX timeout error and report it to the
devlink health. (The watchdog detects TX timeouts, but the driver verify
the issue still exists before launching any recover method).

In addition, recover from TX timeout in case of lost interrupt was added
to the TX reporter recover method. The TX timeout recover from lost
interrupt is not a new feature in the driver, this patch re-organize the
functionality and move it to the TX reporter recovery flow.

TX timeout example:
(with auto_recover set to false, if set to true, the manual recover and
diagnose sections are irrelevant)

$cat /sys/kernel/debug/tracing/trace
...
devlink_health_report: bus_name=pci dev_name=0000:00:09.0
driver_name=mlx5_core reporter_name=TX: TX timeout on queue: 0, SQ: 0xd8a, CQ:
0x406, SQ Cons: 0x2 SQ Prod: 0x2, usecs since last trans: 13972000

$devlink health diagnose pci/0000:00:09 reporter TX
SQ 0xd8a: HW state: 1, stopped: 1
SQ 0xe44: HW state: 1, stopped: 0
SQ 0xeb4: HW state: 1, stopped: 0
SQ 0xf1f: HW state: 1, stopped: 0
SQ 0xf80: HW state: 1, stopped: 0
SQ 0xfe5: HW state: 1, stopped: 0

$devlink health recover pci/0000:00:09 reporter TX
$devlink health show
pci/0000:00:09.0:
  name TX state healthy #err 1 #recover 1 last_dump_ts N/A dump_available false
    attributes:
        grace_period 500 auto_recover false
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add mlx5e tx reporter to devlink health reporters. This reporter will be
responsible for diagnosing, reporting and recovering of TX errors.
This patch declares the TX reporter operations and allocate it using the
devlink health API. Currently, this reporter supports reporting and
recovering from send error CQE only. In addition, it adds diagnose
information for the open SQs.

For a local SQ recover (due to driver error report), in case of SQ recover
failure, the recover operation will be considered as a failure.
For a full TX recover, an attempt to close and open the channels will be
done. If this one passed successfully, it will be considered as a
successful recover.

The SQ recover from error CQE flow is not a new feature in the driver,
this patch re-organize the functions and adapt them for the devlink
health API. For this purpose, move code from en_main.c to a new file
named reporter_tx.c.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink health dump commands, in order to run an dump operation
over a specific reporter.

The supported operations are dump_get in order to get last saved
dump (if not exist, dump now) and dump_clear to clear last saved
dump.

It is expected from driver's callback for diagnose command to fill it
via the buffer descriptors API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink health diagnose command, in order to run a diagnose
operation over a specific reporter.

It is expected from driver's callback for diagnose command to fill it
via the buffer descriptors API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink health recover command to the uapi, in order to allow the user
to execute a recover operation over a specific reporter.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink health set command, in order to set configuration parameters
for a specific reporter.
Supported parameters are:
- graceful_period: Time interval between auto recoveries (in msec)
- auto_recover: Determines if the devlink shall execute recover upon
		receiving error for the reporter
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink health get command to provide reporter/s data for user space.
Add the ability to get data per reporter or dump data from all available
reporters.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upon error discover, every driver can report it to the devlink health
mechanism via devlink_health_report function, using the appropriate
reporter registered to it. Driver can pass error specific context which
will be delivered to it as part of the dump / recovery callbacks.

Once an error is reported, devlink health will do the following actions:
* A log is being send to the kernel trace events buffer
* Health status and statistics are being updated for the reporter instance
* Object dump is being taken and stored at the reporter instance (as long
  as there is no other dump which is already stored)
* Auto recovery attempt is being done. depends on:
  - Auto Recovery configuration
  - Grace period vs. time since last recover
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Devlink health reporter is an instance for reporting, diagnosing and
recovering from run time errors discovered by the reporters.
Define it's data structure and supported operations.
In addition, expose devlink API to create and destroy a reporter.
Each devlink instance will hold it's own reporters list.

As part of the allocation, driver shall provide a set of callbacks which
will be used the devlink in order to handle health reports and user
commands related to this reporter. In addition, driver is entitled to
provide some priv pointer, which can be fetched from the reporter by
devlink_health_reporter_priv function.

For each reporter, devlink will hold a metadata of statistics,
buffers and status.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Devlink health buffer is a mechanism to pass descriptors between drivers
and devlink. The API allows the driver to add objects, object pair,
value array (nested attributes), value and name.

Driver can use this API to fill the buffers in a format which can be
translated by the devlink to the netlink message.

In order to fulfill it, an internal buffer descriptor is defined. This
will hold the data and metadata per each attribute and by used to pass
actual commands to the netlink.

This mechanism will be later used in devlink health for dump and diagnose
data store by the drivers.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although matchall always matches packets, however, it still
relies on a protocol match first. So it is still useful to have
such a counter for matchall. Of course, unlike u32, every time
we hit a matchall filter, it is always a success, so we don't
have to distinguish them.

Sample output:

filter protocol 802.1Q pref 100 matchall chain 0
filter protocol 802.1Q pref 100 matchall chain 0 handle 0x1
  not_in_hw (rule hit 10)
	action order 1: vlan  pop continue
	 index 1 ref 1 bind 1 installed 40 sec used 1 sec
	Action statistics:
	Sent 836 bytes 10 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0
Reported-by: NMartin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: improve stopping PHY

This patchset improves and simplifies stopping the PHY.

Heiner Kallweit (3):
  net: phy: stop PHY if needed when entering phy_disconnect
  net: phy: ensure phylib state machine is stopped after calling phy_stop
  net: phy: remove phy_stop_interrupts

v2:
- break down the patch to a patchset
v3:
- don't warn if driver didn't call phy_stop before phy_disconnect
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Interrupts have been disabled in phy_stop() already. So we can remove
phy_stop_interrupts() and free the interrupt in phy_disconnect()
directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call to the phylib state machine in phy_stop() just ensures that
the state machine isn't re-triggered, but a state machine call may
be scheduled already. So lets's call phy_stop_machine().
This also allows to get rid of the call to phy_stop_machine() in
phy_disconnect().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stop PHY if needed when entering phy_disconnect. This allows drivers
that don't need a separate call to phy_stop() to omit this call.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since tcp_mmap() is defined when CONFIG_MMU is set.
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two lines that have indentation issues, fix these. Also remove
an empty line.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a goto statement that indented too deeply, fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only caller of get_phy_id() is get_phy_device(). There a PHY ID of
0xffffffff is translated back to -ENODEV. So we can avoid some
overhead by returning -ENODEV directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since recent changes to the phylib state machine state PHY_CHANGELINK
isn't used any longer. Therefore let's remove it.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove gre_hdr_len from ip6erspan_rcv routine signature since
it is not longer used
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: remove code from tcp_create_openreq_child()

tcp_create_openreq_child() is essentially cloning a listener, then
must initialize some fields that can not be inherited.

Listeners are either fresh sockets, or sockets that came through
tcp_disconnect() after a session that dirtied many fields.

By moving code to tcp_disconnect(), we can shorten time taken
to create a clone, since tcp_disconnect() operation is very
unlikely.
====================
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we make sure all listeners have these fields cleared, then a clone
will also inherit zero values.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we make sure all listeners have proper tp->rack value,
then a clone will also inherit proper initial value.

Note that fresh sockets init tp->rack from tcp_init_sock()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we make sure all listeners have app_limited set to ~0U,
then a clone will also inherit proper initial value.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we make sure all listeners have these fields cleared, then a clone
will also inherit zero values.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All listeners have this field cleared already, since tcp_disconnect()
clears it and newly created sockets have also a zero value here.

So a clone will inherit a zero value here.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Passive connections can inherit proper value by cloning,
if we make sure all listeners have the proper values there.

tcp_disconnect() was setting snd_cwnd to 2, which seems
quite obsolete since IW10 adoption.

Also remove an obsolete comment.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we make sure a listener always has its mdev_us
field set to TCP_TIMEOUT_INIT, we do not need to rewrite
this field after a new clone is created.

tcp_disconnect() is very seldom used in real applications.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All listeners have this field cleared already, since tcp_disconnect()
clears it and newly created sockets have also a zero value here.

So a clone will inherit a zero value here.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New sockets have this field cleared, and tcp_disconnect()
calls tcp_write_queue_purge() which among other things
also clear tp->packets_out

So a listener is guaranteed to have this field cleared.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>