Use eth_hw_addr_random() instead of calling random_ether_addr().
Here, this change is setting addr_assign_type to NET_ADDR_RANDOM.

The Coccinelle semantic patch that performs this transformation
is as follows:

@@
identifier a,b;
@@

-random_ether_addr(a->b);
+eth_hw_addr_random(a);
Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The limit for BQL is updated each time we call
netdev_tx_completed_queue.
Without this patch the BQL limit was updated for every TX event we
see.
The issue was that this only updated the limit to handle the data
we complete in two events as the first event wouldn't show that
enough traffic had been processed between them.

This was OK when interrupt moderation was off but not when it was
on as more data had to be completed in a single interrupt.

The patch changes this so that we do report the completion to BQL
only when all the TX events in the interrupt have been processed.
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As its first order of business, boomerang_interrupt() checks whether
the device really has any pending interrupts. If it does not,
it does nothing and returns, but it still returns IRQ_HANDLED.

This is wrong: interrupt was not handled, IRQ handlers of other
devices sharing this IRQ line need to be called.

vortex_interrupt() has it right: it returns IRQ_NONE in this case
via IRQ_RETVAL(0).

Do the same in boomerang_interrupt().
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: David S. Miller <davem@davemloft.net>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch avoids the double up_write to filter_sem if
efx_net_open() fails.

Resolves: 2d432f20Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When cpsw's number of slave is set to 1 in device tree and while
accessing second slave ndev and priv in cpsw_tx_interrupt(),
there is a kernel crash. This is due to cpsw_get_slave_priv()
not verifying number of slaves while retriving netdev priv and
returns a invalid memory region. Fixing the issue by introducing
number of slave check in cpsw_get_slave_priv() and
cpsw_get_slave_ndev().

[   15.879589] Unable to handle kernel paging request at virtual address 0f0e142c
[   15.888540] pgd = ed374000
[   15.891359] [0f0e142c] *pgd=00000000
[   15.895105] Internal error: Oops: 5 [#1] SMP ARM
[   15.899936] Modules linked in:
[   15.903139] CPU: 0 PID: 593 Comm: udhcpc Tainted: G        W       4.1.0-12205-gfda8b18c-dirty #10
[   15.912386] Hardware name: Generic AM43 (Flattened Device Tree)
[   15.918557] task: ed2a2e00 ti: ed3fe000 task.ti: ed3fe000
[   15.924187] PC is at cpsw_tx_interrupt+0x30/0x44
[   15.929008] LR is at _raw_spin_unlock_irqrestore+0x40/0x44
[   15.934726] pc : [<c048b9cc>]    lr : [<c05ef4f4>]    psr: 20000193
[   15.934726] sp : ed3ffc08  ip : ed2a2e40  fp : 00000000
[   15.946685] r10: c0969ce8  r9 : c0969cfc  r8 : 00000000
[   15.952129] r7 : 000000c6  r6 : ee54ab00  r5 : ee169c64  r4 : ee534e00
[   15.958932] r3 : 0f0e0d0c  r2 : 00000000  r1 : ed3ffbc0  r0 : 00000001
[   15.965735] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   15.973261] Control: 10c5387d  Table: ad374059  DAC: 00000015
[   15.979246] Process udhcpc (pid: 593, stack limit = 0xed3fe218)
[   15.985414] Stack: (0xed3ffc08 to 0xed400000)
[   15.989954] fc00:                   ee54ab00 c009928c c0a9e648 60000193 000032e4 ee169c00
[   15.998478] fc20: ee169c64 ee169c00 ee169c64 ee54ab00 00000001 00000001 ee67e268 ee008800
[   16.006995] fc40: ee534800 c009946c ee169c00 ee169c64 c08bd660 c009c370 c009c2a4 000000c6
[   16.015513] fc60: c08b75c4 c08b0854 00000000 c0098b3c 000000c6 c0098c50 ed3ffcb0 0000003a
[   16.024033] fc80: ed3ffcb0 fa24010c c08b7800 fa240100 ee7e9880 c00094c4 c05ef4e8 60000013
[   16.032556] fca0: ffffffff ed3ffce4 ee7e9880 c05ef964 00000001 ed2a33d8 00000000 ed2a2e00
[   16.041080] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800
[   16.049603] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff 00000001 00000001
[   16.058121] fd00: ee536bf8 c0487a04 00000000 00000000 ee534800 00000000 00000156 c048c990
[   16.066645] fd20: 00000000 00000000 c0969f40 00000000 00000000 c05000e8 00000001 00000000
[   16.075167] fd40: 00000000 c051eefc 00000000 ee67e268 00000000 00000000 ee51b800 ed3ffd9c
[   16.083690] fd60: 00000000 ee67e200 ee51b800 ee7e9880 ee67e268 00000000 00000000 ee67e200
[   16.092211] fd80: ee51b800 ee7e9880 ee67e268 ee534800 ee67e200 c051eedc ee67e268 00000010
[   16.100727] fda0: 00000000 00000000 ee7e9880 ee534800 00000000 ee67e268 ee51b800 c05006fc
[   16.109247] fdc0: ee67e268 00000001 c0500488 00000156 ee7e9880 00000000 ed3fe000 fffffff4
[   16.117771] fde0: ed3fff1c ee7e9880 ee534800 00000148 00000000 ed1f8340 00000000 00000000
[   16.126289] fe00: 00000000 c05a9054 00000000 00000000 00000156 c0ab62a8 00000010 ed3e7000
[   16.134812] fe20: 00000000 00000008 edcfb700 ed3fff1c c0fb5f94 ed2a2e00 c0fb5f64 000005d8
[   16.143336] fe40: c0a9b3b8 00000000 ed3e7070 00000000 00000000 00000000 00009f40 00000000
[   16.151858] fe60: 00000000 00020022 00110008 00000000 00000000 43004400 00000000 ffffffff
[   16.160374] fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.168898] fea0: edcfb700 bee5f380 00000014 00000000 ed3fe000 00000000 00004400 c04e2b64
[   16.177415] fec0: 00000002 c04e3b00 ed3ffeec 00000001 0000011a 00000000 00000000 bee5f394
[   16.185937] fee0: 00000148 ed3fff10 00000014 00000001 00000000 00000000 ed3ffee4 00000000
[   16.194459] ff00: 00000000 00000000 00000000 c04e3664 00080011 00000002 06000000 ffffffff
[   16.202980] ff20: 0000ffff ffffffff 0000ffff c008dd54 ee5a6f08 ee636e80 c096972d c0089c14
[   16.211499] ff40: 00000000 60000013 ee5a6f40 60000013 00000000 ee5a6f40 00000002 00000006
[   16.220023] ff60: 00000000 edcfb700 00000001 ed2a2e00 c000f60c 00000001 0000011a c008ea34
[   16.228540] ff80: 00000006 00000000 bee5f380 00000014 bee5f380 00000014 bee5f380 00000122
[   16.237059] ffa0: c000f7c4 c000f5e0 bee5f380 00000014 00000006 bee5f394 00000148 00000000
[   16.245581] ffc0: bee5f380 00000014 bee5f380 00000122 fffffd6e 00004300 00004800 00004400
[   16.254104] ffe0: bee5f378 bee5f36c 000307ec b6f39044 40000010 00000006 ed36fa40 00000000
[   16.262642] [<c048b9cc>] (cpsw_tx_interrupt) from [<c009928c>] (handle_irq_event_percpu+0x64/0x204)
[   16.272076] [<c009928c>] (handle_irq_event_percpu) from [<c009946c>] (handle_irq_event+0x40/0x64)
[   16.281330] [<c009946c>] (handle_irq_event) from [<c009c370>] (handle_fasteoi_irq+0xcc/0x1a8)
[   16.290220] [<c009c370>] (handle_fasteoi_irq) from [<c0098b3c>] (generic_handle_irq+0x20/0x30)
[   16.299197] [<c0098b3c>] (generic_handle_irq) from [<c0098c50>] (__handle_domain_irq+0x64/0xdc)
[   16.308273] [<c0098c50>] (__handle_domain_irq) from [<c00094c4>] (gic_handle_irq+0x20/0x60)
[   16.316987] [<c00094c4>] (gic_handle_irq) from [<c05ef964>] (__irq_svc+0x44/0x5c)
[   16.324779] Exception stack(0xed3ffcb0 to 0xed3ffcf8)
[   16.330044] fca0:                                     00000001 ed2a33d8 00000000 ed2a2e00
[   16.338567] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800
[   16.347090] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff
[   16.353987] [<c05ef964>] (__irq_svc) from [<c05ef4e8>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   16.362973] [<c05ef4e8>] (_raw_spin_unlock_irqrestore) from [<c0487a04>] (cpdma_check_free_tx_desc+0x60/0x6c)
[   16.373311] [<c0487a04>] (cpdma_check_free_tx_desc) from [<c048c990>] (cpsw_ndo_start_xmit+0xb4/0x1ac)
[   16.383017] [<c048c990>] (cpsw_ndo_start_xmit) from [<c05000e8>] (dev_hard_start_xmit+0x2a4/0x4c0)
[   16.392364] [<c05000e8>] (dev_hard_start_xmit) from [<c051eedc>] (sch_direct_xmit+0xf4/0x210)
[   16.401246] [<c051eedc>] (sch_direct_xmit) from [<c05006fc>] (__dev_queue_xmit+0x2ac/0x7bc)
[   16.409960] [<c05006fc>] (__dev_queue_xmit) from [<c05a9054>] (packet_sendmsg+0xc68/0xeb4)
[   16.418585] [<c05a9054>] (packet_sendmsg) from [<c04e2b64>] (sock_sendmsg+0x14/0x24)
[   16.426663] [<c04e2b64>] (sock_sendmsg) from [<c04e3b00>] (SyS_sendto+0xb4/0xe0)
[   16.434377] [<c04e3b00>] (SyS_sendto) from [<c000f5e0>] (ret_fast_syscall+0x0/0x54)
[   16.442360] Code: e5943118 e593303c e3530000 0a000002 (e5930720)
[   16.448716] ---[ end trace a68159f094d85ba6 ]---
[   16.453526] Kernel panic - not syncing: Fatal exception in interrupt
[   16.460149] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some versions of MCFW do not support the MC_CMD_VADAPTOR_SET_MAC
command, and ENOSYS will be returned.

If the PF created its own vport, the function's datapath must be
stopped and the vport can be reconfigured to reflect the new MAC
address.

If the MCFW created the vport for the PF (which is the case when
the nic_data->vport_mac is blank), nothing further needs to be
done as the vport is not under the control of the PF.

This only applies to PFs because the MCFW in question does not
support VFs.
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Re-organize the structure of error handling to avoid having
to duplicate the netif_err() around the ifdefs.

The only change to the behaviour of the error-handling is that
the PF's data structure to record VF details should only be
updated if the original command succeeded.
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a switch is attached to the mdio bus, the mdio bus can be used
while the interface is not open. If the IPG clock is not enabled, MDIO
reads/writes will simply time out.

Add support for runtime PM to control this clock. Enable/disable this
clock using runtime PM, with open()/close() and mdio read()/write()
function triggering runtime PM operations. Since PM is optional, the
IPG clock is enabled at probe and is no longer modified by
fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is
guaranteed the clock is running when MDIO operations are performed.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running a kernel configured with CONFIG_DMA_API_DEBUG=y a warning
is issued:
  DMA-API: device driver tries to sync DMA memory it has not allocated

This warning is the result of mapping the full range of the Rx buffer
pages allocated and then performing a dma_sync_single_for_cpu against
a calculated DMA address. The proper thing to do is to use the
dma_sync_single_range_for_cpu with a base DMA address and an offset.
Reported-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Tested-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Part of commit 49aa284fe64c4c1 ("cxgb4: Add support for devlog")
change introduced a real bug where the Device Log Sequence Numbers are
no longer being converted from firmware Big-Endian to local CPU-Endian
format.

This patch moves all of the translation into the devlog_show() routine.
The only endianness code now in devlog_open() is the small loop to find the
earliest (lowest Sequence Number) Device Log entry in the circular buffer.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In enic_poll, we clean tx and rx queues, when low latency busy socket polling
is happening, enic_poll will only clean tx queue. After cleaning tx, it should
return total budget for re-poll.

There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi().
In this window if an irq occurs and napi is scheduled on different cpu, it tries
to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking
the interrupt.

v2:
Do not change tx wonk done behaviour. Consider only rx work done for completing
napi.
Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kvfree() instead of open-coding it.
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Cc: Hariprasad S <hariprasad@chelsio.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use kvfree() instead of open-coding it.
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Cc: Santosh Raspatur <santosh@chelsio.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't
support TCP/IP checksumming with frame sizes larger than 1600 bytes.

This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and
NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set
to a value greater than 1600 bytes.
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvneta driver supports the Ethernet IP found in the Armada 370, XP,
380 and 385 SoCs. Since at least one more hardware feature is available
for the Armada XP SoCs then a way to identify them is needed.

This patch introduces a new compatible string "marvell,armada-xp-neta".
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a typo in the IPG_FRAMETOOLONGERRORS constant.
Signed-off-by: NNik Nyby <nikolas@gnu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"reigster" -> "register"
Signed-off-by: NNik Nyby <nikolas@gnu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a typo in the MMC_RX_CRC_ERROR constant.
Signed-off-by: NNik Nyby <nikolas@gnu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vfree() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When allocating Rx related buffers, alloc_pages is called using an order
number that is decreased until successful. A system under stress can
experience failures during this allocation process resulting in a warning
being issued. This message can be of concern to end users even though the
failure is not fatal. Since the failure is not fatal and can occur
multiple times, the driver should include the __GFP_NOWARN flag to
suppress the warning message from being issued.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO
management controller which will make the initial read or write to them
to fail and return 0xffff. This is a real issue as the typical first
thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id()
to register a driver for these PHYs.

Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this
workaround for the MDIO bus controller consists in scanning the list of
PHYs to do this initial read workaround for as part of the MDIO bus
reset routine which is invoked prior to mdiobus_scan().

Once we have a proper PHY driver/device registered, all workarounds are
located there (e.g: power management suspend/resume calls).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device
driver frees DMA memory with wrong function".
On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API:
device driver frees DMA memory with different size".

Fix this by making the mapping and unmapping symmetric:
 - Do not map the whole pool page at once. Instead map the
   SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in
   the same manner.
 - What's mapped using dma_map_page() must be unmapped using
   dma_unmap_page().

Tested on ppc64.

Fixes: 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If NO_DMA=y:

    ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_set_mask" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_mapping_error" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_map_single" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_map_page" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_map_single" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined!

Before, the symbols depended implicitly on HAS_DMA through PCI or
USE_OF.  Add explicit dependencies on HAS_DMA to fix this.

Fixes: b7d3282a ("net: via/Kconfig: replace USE_OF with OF_???")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michel reported following lockdep splat

[   44.718117] INFO: trying to register non-static key.
[   44.723081] the code is fine but needs lockdep annotation.
[   44.728559] turning off the locking correctness validator.
[   44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0
[   44.770289] Call Trace:
[   44.772741]  [<ffffffff816eb1cd>] dump_stack+0x4c/0x65
[   44.777879]  [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510
[   44.783708]  [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10
[   44.789538]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.795276]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.801967]  [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10
[   44.807793]  [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250
[   44.814142]  [<ffffffff81112ba6>] lock_acquire+0xb6/0x290
[   44.819537]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.824844]  [<ffffffff810d66ad>] flush_work+0x3d/0x280
[   44.830061]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.835366]  [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20
[   44.841889]  [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50
[   44.847365]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.853102]  [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0
[   44.859359]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.866045]  [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0
[   44.872048]  [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x]
[   44.878481]  [<ffffffff810d8670>] cancel_work_sync+0x10/0x20
[   44.884134]  [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x]
[   44.890829]  [<ffffffff8110ce02>] ? up+0x32/0x50
[   44.895439]  [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0
[   44.901005]  [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x]
[   44.907527]  [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0
[   44.912921]  [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x]
[   44.919879]  [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x]
[   44.926664]  [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40
[   44.932148]  [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20
[   44.937364]  [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630
[   44.942582]  [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70
[   44.947972]  [<ffffffff815ac013>] sock_ioctl+0x73/0x280
[   44.953192]  [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0
[   44.958587]  [<ffffffff8110d0b3>] ? up_read+0x23/0x40
[   44.963631]  [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0
[   44.969105]  [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0
[   44.974149]  [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f

As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED,
we also need to guard bnx2x_stop_ptp() with same condition, otherwise
ptp_task workqueue is not initialized and kernel barfs on
cancel_work_sync()

Fixes: eeed018c ("bnx2x: Add timestamping and PTP hardware clock support")
Reported-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Michal Kalderon <Michal.Kalderon@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: David Decotigny <decot@google.com>
Acked-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all silicon implementations of the Freescale FEC hardware module
have the RACC (Receive Accelerator Function) register, so we should not
be trying to access it on those that don't. Currently none of the ColdFire
based parts with a FEC have it.

Support for RACC was introduced by commit 4c09eed9 ("net: fec: Enable imx6
enet checksum acceleration"). A fix was introduced in commit d1391930
("net: fec: Fix build for MCF5272") that disables its use on the ColdFire
M5272 part, but it doesn't fix the general case of other ColdFire parts.

To fix we create a quirk flag, FEC_QUIRK_HAS_RACC, and check it before
working with the RACC register.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If CONFIG_ACPI=n:

    drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_get_resources’:
    drivers/net/ethernet/apm/xgene/xgene_enet_main.c:951: warning: ‘ret’ may be used uninitialized in this function

If the driver is bound to a legacy platform device, ret will contain
arbitrary data. If it is non-zero, it will be returned to the caller as
an error code.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver will only configure as many queues as there are available
CPUs, up the maximum number of queues. However, it always configures
RSS as though it is using the maximum number of queues. This can cause
the device to drop a lot of RX traffic, as the packets get assigned to
nonfunctional queues.

Fix this by only configuring RSS with the number of active queues.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Down was requesting queue disables, but then exited immediately
without waiting for the queues to actually disable.  This could
allow any function called after i40evf_down to run immediately,
including i40evf_up, and causes a memory leak.

Removing the whole reinit_locked function is the best way
to go about this, and allows for the driver to handle the
state changes by requesting reset from the periodic timer.

Also, add a couple WARN_ONs in slow path to help us recognize
if we re-introduce this issue or missed any cases.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In SPT hardware does not require this driver workaround.
Removed the conditional that caused K1 workaround execution on SPT.
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Due to clocking changes in the Skylake platform, there was i219
data corruption. To work around this, HW team reported the need
to increase the minimum gap between the PHY FIFO read and write pointers.
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In SPT/i219, there were CRC errors in speed 10/100 full duplex.
The solution given by the HW team is to increase the IPG from 8 to 0xC
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In i219, there is a hardware bug that prevented ULP entry.
A side effect of the original software fix for this was that EEE in
Sx couldn't be enabled.
This patch implements a modified flow that allows both ULP and EEE in Sx.
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

On power up, the MAC - PHY interface needs to be set to PCIe, even if
cable is disconnected.  In ME systems, the ME handles this on exit from
Sx state. In non-ME, the driver handles it. Added a check for non-ME
system to the driver code that handles that.
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e_disable_aspm called pci_disable_link_state_locked which requires
pci_bus_sem to be held, but is also called from places where this semaphore
was not previously acquired. This patch implements two flavors of
disable_aspm, one that acquires the lock, and the other (_locked) which
should be called when the semaphore is already acquired.
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump version of igb to igb-5.2.18
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Disable IPv6 extension header processing as per hardware errata.

Also fix copyright date.
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Due to FW constraints, driver must make sure that transmitted SKBs will
not be too fragmented, or in the case that they are - that each 'window'
of fragments passed to the FW would contain at least an mss worth of data.

For encapsultaed packets the calculation is wrong, since it ignores the
inner headers in the calculation of the headers' length.
This could lead to a FW assertion in case of a too-fragmented encapsulated
packet.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During an error flow when trying to access the nvram the driver doesn't
release the hw lock it acquired.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since driver statistics flow access MACs and those might reset during
link re-configurations, when we're about to change link properties we
have to make sure that statistics are not operational.
Statisics would be re-enabled [i.e., gathering of statistics would
re-commence] once physical link is achieved again.

Since driver employs a link-flap avoidance scheme, there are scenarios
where driver will receive no indication that the new link is up, and
as a result the statistics would not be re-enabled.

Preventing LFA from working in such cases would guarantee that we'll
always receive such indications and thus will fix statistics gathering.
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>