- 17 11月, 2019 23 次提交
-
-
由 Ard Biesheuvel 提交于
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Now that all users of generic ChaCha code have moved to the core library, there is no longer a need for the generic ChaCha skcpiher driver to export parts of it implementation for reuse by other drivers. So drop the exports, and make the symbols static. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
This integrates the accelerated MIPS 32r2 implementation of ChaCha into both the API and library interfaces of the kernel crypto stack. The significance of this is that, in addition to becoming available as an accelerated library implementation, it can also be used by existing crypto API code such as Adiantum (for block encryption on ultra low performance cores) or IPsec using chacha20poly1305. These are use cases that have already opted into using the abstract crypto API. In order to support Adiantum, the core assembler routine has been adapted to take the round count as a function argument rather than hardcoding it to 20. Co-developed-by: NRené van Dorst <opensource@vdorst.com> Signed-off-by: NRené van Dorst <opensource@vdorst.com> Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jason A. Donenfeld 提交于
This imports the accelerated MIPS 32r2 ChaCha20 implementation from the Zinc patch set. Co-developed-by: NRené van Dorst <opensource@vdorst.com> Signed-off-by: NRené van Dorst <opensource@vdorst.com> Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Expose the accelerated NEON ChaCha routine directly as a symbol export so that users of the ChaCha library API can use it directly. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Instead of falling back to the generic ChaCha skcipher driver for non-SIMD cases, use a fast scalar implementation for ARM authored by Eric Biggers. This removes the module dependency on chacha-generic altogether, which also simplifies things when we expose the ChaCha library interface from this module. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Expose the accelerated NEON ChaCha routine directly as a symbol export so that users of the ChaCha library API can use it directly. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Depend on the generic ChaCha library routines instead of pulling in the generic ChaCha skcipher driver, which is more than we need, and makes managing the dependencies between the generic library, generic driver, accelerated library and driver more complicated. While at it, drop the logic to prefer the scalar code on short inputs. Turning the NEON on and off is cheap these days, and one major use case for ChaCha20 is ChaCha20-Poly1305, which is guaranteed to hit the scalar path upon every invocation (when doing the Poly1305 nonce generation) Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Wire the existing x86 SIMD ChaCha code into the new ChaCha library interface, so that users of the library interface will get the accelerated version when available. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
In preparation of extending the x86 ChaCha driver to also expose the ChaCha library interface, drop the dependency on the chacha_generic crypto driver as a non-SIMD fallback, and depend on the generic ChaCha library directly. This way, we only pull in the code we actually need, without registering a set of ChaCha skciphers that we will never use. Since turning the FPU on and off is cheap these days, simplify the SIMD routine by dropping the per-page yield, which makes for a cleaner switch to the library API as well. This also allows use to invoke the skcipher walk routines in non-atomic mode. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
Currently, our generic ChaCha implementation consists of a permute function in lib/chacha.c that operates on the 64-byte ChaCha state directly [and which is always included into the core kernel since it is used by the /dev/random driver], and the crypto API plumbing to expose it as a skcipher. In order to support in-kernel users that need the ChaCha streamcipher but have no need [or tolerance] for going through the abstractions of the crypto API, let's expose the streamcipher bits via a library API as well, in a way that permits the implementation to be superseded by an architecture specific one if provided. So move the streamcipher code into a separate module in lib/crypto, and expose the init() and crypt() routines to users of the library. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ard Biesheuvel 提交于
In preparation of introducing a set of crypto library interfaces, tidy up the Makefile and split off the Kconfig symbols into a separate file. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
If aead is built as a module along with cryptomgr, it creates a dependency loop due to the dependency chain aead => crypto_null => cryptomgr => aead. This is due to the presence of the AEAD geniv code. This code is not really part of the AEAD API but simply support code for IV generators such as seqiv. This patch moves the geniv code into its own module thus breaking the dependency loop. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
The crypto API requires cryptomgr to be present for probing to work so we need a softdep to ensure that cryptomgr is added to the initramfs. This was usually not a problem because until very recently it was not practical to build crypto API as module but with the recent work to eliminate direct AES users this is now possible. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Corentin Labbe 提交于
The linux-amlogic mailing list need to be in copy of all patch for the amlogic crypto. Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Corentin Labbe 提交于
This patch fixes two resources leak that occur on error path. Reported-by: Ncoverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1487403 ("RESOURCE_LEAK") Addresses-Coverity-ID: 1487401 ("Resource leaks") Fixes: 48fe583f ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Pascal van Leeuwen 提交于
Fixed 2 copy-paste mistakes in the commit mentioned below that caused authenc w/ (3)DES to consistently fail on Macchiatobin (but strangely work fine on x86+FPGA??). Now fully tested on both platforms. Fixes: 13a1bb93 ("crypto: inside-secure - Fixed warnings...") Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Greg Kroah-Hartman 提交于
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Hao Fang 提交于
Currently the VF can be enabled only through sysfs interface after module loaded, but this also needs to be done when the module loaded in some scenarios. This patch adds module param vfs_num, adds hisi_zip_sriov_enable() in probe, and also adjusts the position of probe. Signed-off-by: NHao Fang <fanghao11@huawei.com> Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Pascal van Leeuwen 提交于
Fixed mask used for CFSIZE and RFSIZE fields of HIA_OPTIONS register, these were all 1 bit too wide. Which caused the probing of a standard EIP97 to actually hang due to assume way too large descriptor FIFO's. Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Alexander Sverdlin 提交于
Current polling timeout is 25 us. The hardware is currently configured to harvest the entropy for 81920 us. This leads to timeouts even during blocking read (wait=1). Log snippet: [ 5.727589] [<c040ffcc>] (ks_sa_rng_probe) from [<c04181e8>] (platform_drv_probe+0x58/0xb4) ... [ 5.727805] hwrng: no data available ... [ 13.157016] random: systemd: uninitialized urandom read (16 bytes read) [ 13.157033] systemd[1]: Initializing machine ID from random generator. ... [ 15.848770] random: fast init done ... [ 15.848807] random: crng init done After the patch: [ 6.223534] random: systemd: uninitialized urandom read (16 bytes read) [ 6.223551] systemd[1]: Initializing machine ID from random generator. ... [ 6.876075] random: fast init done ... [ 6.954200] random: systemd: uninitialized urandom read (16 bytes read) [ 6.955244] random: systemd: uninitialized urandom read (16 bytes read) ... [ 7.121948] random: crng init done Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 15 11月, 2019 4 次提交
-
-
由 Tian Tao 提交于
Fix the warning below. ./crypto/tgr192.c:558:43-44: Unneeded semicolon ./crypto/tgr192.c:586:44-45: Unneeded semicolon Fixes: f63fbd3d ("crypto: tgr192 - Switch to shash") Signed-off-by: NTian Tao <tiantao6@huawei.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Colin Ian King 提交于
There are spelling mistakes in dev_warn and dev_err messages. Fix these. Change "recommandation" to "recommendation" and "tryed" to "tried". Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Codrin Ciubotariu 提交于
Add platform support for the new IP found on sam9x60 SoC. For this version, if the peripheral clk is above 100MHz, the HALFR bit must be set. This bit is available only if the IP can generate a random number every 168 cycles (instead of 84). Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Codrin Ciubotariu 提交于
Add compatible for new IP found on sam9x60 SoC. Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 08 11月, 2019 12 次提交
-
-
由 Tudor Ambarus 提交于
The following error is raised when CONFIG_CRYPTO_DEV_ATMEL_AES=y and CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=m: drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey': atmel-aes.c:(.text+0x9bc): undefined reference to `crypto_authenc_extractkeys' Makefile:1094: recipe for target 'vmlinux' failed Fix it by moving the selection of CRYPTO_AUTHENC under config CRYPTO_DEV_ATMEL_AES. Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to...") Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Chuhong Yuan 提交于
safexcel_remove misses disabling priv->reg_clk like what is done when probe fails. Add the missed call to fix it. Signed-off-by: NChuhong Yuan <hslester96@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Zhou Wang 提交于
Replace #ifdef CONFIG_NUMA with IS_ENABLED(CONFIG_NUMA) to fix kbuild error. Fixes: 700f7d0d ("crypto: hisilicon - fix to return...") Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com> Reported-by: Nkbuild test robot <lkp@intel.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 kbuild test robot 提交于
Use kmemdup rather than duplicating its implementation Generated by: scripts/coccinelle/api/memdup.cocci Fixes: f08fcced ("crypto: allwinner - Add sun8i-ss cryptographic offloader") CC: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: f08fcced ("crypto: allwinner - Add sun8i-ss cryptographic offloader") CC: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr> Acked-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Christian Lamparter 提交于
This patch fixes a crash that can happen during probe when the available dma memory is not enough (this can happen if the crypto4xx is built as a module). The descriptor window mapping would end up being free'd twice, once in crypto4xx_build_pdr() and the second time in crypto4xx_destroy_sdr(). Fixes: 5d59ad6e ("crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak") Cc: <stable@vger.kernel.org> Signed-off-by: NChristian Lamparter <chunkeey@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Zaibo Xu 提交于
Here adds maintainer information for HiSilicon TRNG V2 driver. Signed-off-by: NZaibo Xu <xuzaibo@huawei.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Zaibo Xu 提交于
This series adds HiSilicon true random number generator(TRNG) driver in hw_random subsystem. Signed-off-by: NZaibo Xu <xuzaibo@huawei.com> Signed-off-by: NWeili Qian <qianweili@huawei.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Colin Ian King 提交于
Currently when the call to crypto_engine_alloc_init fails the error return path returns an uninitialized value in the variable err. Fix this by setting err to -ENOMEM. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 48fe583f ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 YueHaibing 提交于
Use kmemdup rather than duplicating its implementation Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch fixes the remaining sparse endianness warnings. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
As it is if CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is set to m it is in effect disabled. This patch fixes it by using IS_ENABLED instead of ifdef. Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to...") Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 01 11月, 2019 1 次提交
-
-
由 Christian Lamparter 提交于
This patch restores the CRYPTO_AES dependency. This is necessary since some of the crypto4xx driver provided modes need functioning software fallbacks for AES-CTR/CCM and GCM. Fixes: da3e7a97 ("crypto: amcc - switch to AES library for GCM key derivation") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NChristian Lamparter <chunkeey@gmail.com> Acked-by: NArd Biesheuvel <ardb@kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-