The argument 'flags' was missing in ndo_bridge_setlink().
ndo_bridge_dellink() was missing.

Fixes: 407af329 ("bridge: Add netlink interface to configure vlans on bridge ports")
Fixes: add511b3 ("bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellink")
CC: Vlad Yasevich <vyasevic@redhat.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

E1x chips (57710, 57711(E)) have no support for encapsulation
offload. bnx2x incorrectly advertises the support as available.

Setting of those features is conditional on "!CHIP_IS_E1x(bp)", but
the bp struct is not initialized yet at this point and consequently
any chip passes the check.
The check must use the "chip_is_e1x" local variable instead to work
correctly.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are a few fixes that I'd like to still get in:
 * disable U-APSD for better interoperability, from Michal Kazior
 * drop unencrypted frames in mesh forwarding, from Bob Copeland
 * treat non-QoS/WMM HT stations as non-HT, to fix confusion when
   they connect and then get QoS packets anyway due to HT
 * fix counting interfaces for combination checks, otherwise the
   interface combinations aren't properly enforced (from Andrei)
 * fix pure ECSA by reacting to the IE change
 * ignore erroneous (E)CSA to the current channel which sometimes
   happens due to AP/GO bugs
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2015-03-16

1) Fix the network header offset in _decode_session6
   when multiple IPv6 extension headers are present.
   From Hajime Tazaki.

2) Fix an interfamily tunnel crash. We set outer mode
   protocol too early and may dispatch to the wrong
   address family. Move the setting of the outer mode
   protocol behind the last accessing of the inner mode
   to fix the crash.

3) Most callers of xfrm_lookup() expect that dst_orig
   is released on error. But xfrm_lookup_route() may
   need dst_orig to handle certain error cases. So
   introduce a flag that tells what should be done in
   case of error. From Huaibin Wang.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the AP is confused and starts doing a CSA to the same channel,
just ignore that request instead of trying to act it out since it
was likely sent in error anyway.

In the case of the bug I was investigating the GO was misbehaving
and sending out a beacon with CSA IEs still included after having
actually done the channel switch.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

As HT/VHT depend heavily on QoS/WMM, it's not a good idea to
let userspace add clients that have HT/VHT but not QoS/WMM.
Since it does so in certain cases we've observed (client is
using HT IEs but not QoS/WMM) just ignore the HT/VHT info at
this point and don't pass it down to the drivers which might
unconditionally use it.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When a beacon from the AP contains only the ECSA IE, and not a CSA IE
as well, this ECSA IE is not considered for calculating the CRC and
the beacon might be dropped as not being interesting. This is clearly
wrong, it should be handled and the channel switch should be executed.

Fix this by including the ECSA IE ID in the bitmap of interesting IEs.
Reported-by: NGil Tribush <gil.tribush@intel.com>
Reviewed-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Since moving the interface combination checks to mac80211, it's
broken because it now only considers interfaces with an assigned
channel context, so for example any interface that isn't active
can still be up, which is clearly an issue; also, in particular
P2P-Device wdevs are an issue since they never have a chanctx.

Fix this by counting running interfaces instead the ones with a
channel context assigned.

Cc: stable@vger.kernel.org [3.16+]
Fixes: 73de86a3 ("cfg80211/mac80211: move interface counting for combination check to mac80211")
Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
[rewrite commit message, dig out the commit it fixes]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If you pass an invalid string here then you probably deserve the memory
corruption, but it annoys static analysis tools so lets fix it.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[I would really like an ACK on that one from dhowells; it appears to be
quite straightforward, but...]

MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of
fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit
in there.  It gets passed via flags; in fact, another such check in the same
function is done correctly - as flags & MSG_PEEK.

It had been that way (effectively disabled) for 8 years, though, so the patch
needs beating up - that case had never been tested.  If it is correct, it's
-stable fodder.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It should be checking flags, not msg->msg_flags.  It's ->sendmsg()
instances that need to look for that in ->msg_flags, ->recvmsg() ones
(including the other ->recvmsg() instance in that file, as well as
unix_dgram_recvmsg() this one claims to be imitating) check in flags.
Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC
in receive") back in 2010, so it goes quite a while back.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On adding an interface br_add_if() sets the MTU to the min of
all the interfaces. Do the same thing on removing an interface too
in br_del_if.
Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.0-20150314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
Hello David, this is a pull request for net/master, consisting of two patches:

In the first patch Michal Simek enables the xilinx CAN driver for ARM64. The
second patch by Ahmed S. Darwish fixes a race condition in the tx-queue of the
kvaser_usb driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of tx queue wake-up events went missing due to the
outlined scenario below. Start state is a pool of 16 tx URBs,
active tx_urbs count = 15, with the netdev tx queue open.

CPU #1 [softirq]                         CPU #2 [softirq]
start_xmit()                             tx_acknowledge()
................                         ................

atomic_inc(&tx_urbs);
if (atomic_read(&tx_urbs) >= 16) {
                        -->
                                         atomic_dec(&tx_urbs);
                                         netif_wake_queue();
                                         return;
                        <--
    netif_stop_queue();
}

At the end, the correct state expected is a 15 tx_urbs count
value with the tx queue state _open_. Due to the race, we get
the same tx_urbs value but with the tx queue state _stopped_.
The wake-up event is completely lost.

Thus avoid hand-rolled concurrency mechanisms and use a proper
lock for contexts and tx queue protection.
Signed-off-by: NAhmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Enable the xilinx driver for ARM64.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NSören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

inet_diag_dump_one_icsk() allocates too small skb.

Add inet_sk_attr_size() helper right before inet_sk_diag_fill()
so that it can be updated if/when new attributes are added.

iproute2/ss currently does not use this dump_one() interface,
this might explain nobody noticed this problem yet.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 2b995f63.

Панов Андрей reported the following regression:

"Commit 2b995f63 in 4.0.0-rc3 introduces a
nasty bug in transmit, corrupting packets.

To reproduce:

$ dd if=/dev/zero of=zeros bs=1M count=20
$ md5sum -b zeros
8f4e33f3dc3e414ff94e5fb6905cba8c *zeros

This checksum is correct.

Copy file "zeros" to another host with NFS, and it gets corrupted, checksum is
changed.
File should be big, small amounts of transmit isn't affected.

I use an i.MX6 Quad board.

If this commit is reverted, all works fine."
Reported-by: NПанов Андрей <rockford@yandex.ru>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit dfd8645e wrongly assumes that VXLAN_VDI_MASK includes
eight lower order reserved bits of VNI field that are using for remote
checksum offload.

Right now, when VNI number greater then 0xffff, vxlan_udp_encap_recv()
will always return with 'bad_flag' error, reducing the usable vni range
from 0..16777215 to 0..65535. Also, it doesn't really check whether RCO
bits processed or not.

Fix it by adding new VNI mask which has all 32 bits of VNI field:
24 bits for id and 8 bits for other usage.
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Array index 'j' is used before limits check.

Suggest put limit check before index use.

Signed-off-by : <Ameenali023@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't delete napi from hash list during module exit. This will
cause the following panic when doing module load and unload:

BUG: unable to handle kernel paging request at 0000004e00000075
IP: [<ffffffff816bd01b>] napi_hash_add+0x6b/0xf0
PGD 3c5d5067 PUD 0
Oops: 0000 [#1] SMP
...
Call Trace:
[<ffffffffa0a5bfb7>] init_vqs+0x107/0x490 [virtio_net]
[<ffffffffa0a5c9f2>] virtnet_probe+0x562/0x791815639d880be [virtio_net]
[<ffffffff8139e667>] virtio_dev_probe+0x137/0x200
[<ffffffff814c7f2a>] driver_probe_device+0x7a/0x250
[<ffffffff814c81d3>] __driver_attach+0x93/0xa0
[<ffffffff814c8140>] ? __device_attach+0x40/0x40
[<ffffffff814c6053>] bus_for_each_dev+0x63/0xa0
[<ffffffff814c7a79>] driver_attach+0x19/0x20
[<ffffffff814c76f0>] bus_add_driver+0x170/0x220
[<ffffffffa0a60000>] ? 0xffffffffa0a60000
[<ffffffff814c894f>] driver_register+0x5f/0xf0
[<ffffffff8139e41b>] register_virtio_driver+0x1b/0x30
[<ffffffffa0a60010>] virtio_net_driver_init+0x10/0x12 [virtio_net]

This patch fixes this by doing this in virtnet_free_queues(). And also
don't delete napi in virtnet_freeze() since it will call
virtnet_free_queues() which has already did this.

Fixes 91815639 ("virtio-net: rx busy polling support")
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rds_iw_update_cm_id function stores a large 'struct rds_sock' object
on the stack in order to pass a pair of addresses. This happens to just
fit withint the 1024 byte stack size warning limit on x86, but just
exceed that limit on ARM, which gives us this warning:

net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the use of this large variable is basically bogus, we can rearrange
the code to not do that. Instead of passing an rds socket into
rds_iw_get_device, we now just pass the two addresses that we have
available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly,
to create two address structures on the stack there.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Test that sk != NULL before reading sk->sk_tsflags.

Fixes: 49ca0d8b ("net-timestamp: no-payload option")
Reported-by: NOne Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John reported that my previous commit added a regression
on his router.

This is because sender_cpu & napi_id share a common location,
so get_xps_queue() can see garbage and perform an out of bound access.

We need to make sure sender_cpu is cleared before doing the transmit,
otherwise any NIC busy poll enabled (skb_mark_napi_id()) can trigger
this bug.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJohn <jw@nuclearfallout.net>
Bisected-by: NJohn <jw@nuclearfallout.net>
Fixes: 2bd82484 ("xps: fix xps for stacked devices")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a performance regression introduced by
7fbb9d84 (xen-netback: release pending
index before pushing Tx responses)

Moving the notify outside of the spin locks means it can be delayed a
long time (if the dealloc thread is descheduled or there is an
interrupt or softirq).
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NZoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL>
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[<ffffffff8155fbd1>]  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470
 [<ffffffff81556f56>] sock_write_iter+0x146/0x160
 [<ffffffff811d9612>] new_sync_write+0x92/0xd0
 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180
 [<ffffffff811da499>] SyS_write+0x59/0xd0
 [<ffffffff81651532>] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP <ffff88003ae8bc68>
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0
...
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 814d488c ("tcp: fix the timid additive increase on stretch
ACKs") fixed a bug where tcp_cong_avoid_ai() would either credit a
connection with an increase of snd_cwnd_cnt, or increase snd_cwnd, but
not both, resulting in cwnd increasing by 1 packet on at most every
alternate invocation of tcp_cong_avoid_ai().

Although the commit correctly implemented the CUBIC algorithm, which
can increase cwnd by as much as 1 packet per 1 packet ACKed (2x per
RTT), in practice that could be too aggressive: in tests on network
paths with small buffers, YouTube server retransmission rates nearly
doubled.

This commit restores CUBIC to a maximum cwnd growth rate of 1 packet
per 2 packets ACKed (1.5x per RTT). In YouTube tests this restored
retransmit rates to low levels.

Testing: This patch has been tested in datacenter netperf transfers
and live youtube.com and google.com servers.

Fixes: 9cd981dc ("tcp: fix stretch ACK bugs in CUBIC")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent change to tcp_cong_avoid_ai() to handle stretch ACKs
introduced a bug where snd_cwnd_cnt could accumulate a very large
value while w was large, and then if w was reduced snd_cwnd could be
incremented by a large delta, leading to a large burst and high packet
loss. This was tickled when CUBIC's bictcp_update() sets "ca->cnt =
100 * cwnd".

This bug crept in while preparing the upstream version of
814d488c.

Testing: This patch has been tested in datacenter netperf transfers
and live youtube.com and google.com servers.

Fixes: 814d488c ("tcp: fix the timid additive increase on stretch ACKs")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changed to my private email address.
Signed-off-by: NChas Williams -- CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If rtnl_newlink() fails on it's call to dev_change_net_namespace(), we
have to make use of the ->dellink() method, if present, just like we
do when rtnl_configure_link() fails.

Fixes: 317f4810 ("rtnl: allow to create device with IFLA_LINK_NETNSID set")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Acked-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2015-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

iwlwifi:

* fix ROC removal - avoids a firmware crash
* fix throughput regression on iwldvm devices
* fix panic in BT Coex
* fixes in rate control
* fixes in scan

b43:

* fix support for 5 GHz only BCM43228 model

rtlwifi:

* improve handling of IPv6 packets

brcmfmac:

* perform bound checking on vendor command buffer
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 16e47624 ("cxgb4: Add new scheme to update T4/T5 firmware")
introduced below coccinelle warning.

>> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:994:2-8: Replace memcpy with
   struct assignment
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current driver support receive VLAN CTAG HW acceleration feature
(NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the
api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there
have overlap between the two memory data point range. The patch just fix
the issue.

V2:
Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset().
Reported-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Fixes: 1b7bde6d ("net: fec: implement rx_copybreak to improve rx performance")
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interrupt is enabled before napi_complete(). A network timeout
occurs if the interrupt handler is called before napi_complete().

Fix the bug by enabling the interrupt after napi_complete().
Signed-off-by: NYongbae Park <yongbae2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interrupt is enabled before napi_complete(). A network timeout
occurs if the interrupt handler is called before napi_complete().

Fix the bug by enabling the interrupt after napi_complete().
Signed-off-by: NYongbae Park <yongbae2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We dynamically allocate divisor+1 entries for ->ht[] in tc_u_hnode:

  ht = kzalloc(sizeof(*ht) + divisor*sizeof(void *), GFP_KERNEL);

So ->ht is supposed to be the last field of this struct, however
this is broken, since an rcu head is appended after it.

Fixes: 1ce87720 ("net: sched: make cls_u32 lockless")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull kvm/s390 bugfixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: non-LPAR case obsolete during facilities mask init
  KVM: s390: include guest facilities in kvm facility test
  KVM: s390: fix in memory copy of facility lists
  KVM: s390/cpacf: Fix kernel bug under z/VM
  KVM: s390/cpacf: Enable key wrapping by default

Pull s390 fixes from Martin Schwidefsky:
 "One performance optimization for page_clear and a couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix incorrect ASCE after crst_table_downgrade
  s390/ftrace: fix crashes when switching tracers / add notrace to cpu_relax()
  s390/pci: unify pci_iomap symbol exports
  s390/pci: fix [un]map_resources sequence
  s390: let the compiler do page clearing
  s390/pci: fix possible information leak in mmio syscall
  s390/dcss: array index 'i' is used before limits check.
  s390/scm_block: fix off by one during cluster reservation
  s390/jump label: improve and fix sanity check
  s390/jump label: add missing jump_label_apply_nops() call

Merge tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull seq-buf/ftrace fixes from Steven Rostedt:
 "This includes fixes for seq_buf_bprintf() truncation issue.  It also
  contains fixes to ftrace when /proc/sys/kernel/ftrace_enabled and
  function tracing are started.  Doing the following causes some issues:

    # echo 0 > /proc/sys/kernel/ftrace_enabled
    # echo function_graph > /sys/kernel/debug/tracing/current_tracer
    # echo 1 > /proc/sys/kernel/ftrace_enabled
    # echo nop > /sys/kernel/debug/tracing/current_tracer
    # echo function_graph > /sys/kernel/debug/tracing/current_tracer

  As well as with function tracing too.  Pratyush Anand first reported
  this issue to me and supplied a patch.  When I tested this on my x86
  test box, it caused thousands of backtraces and warnings to appear in
  dmesg, which also caused a denial of service (a warning for every
  function that was listed).  I applied Pratyush's patch but it did not
  fix the issue for me.  I looked into it and found a slight problem
  with trampoline accounting.  I fixed it and sent Pratyush a patch, but
  he said that it did not fix the issue for him.

  I later learned tha Pratyush was using an ARM64 server, and when I
  tested on my ARM board, I was able to reproduce the same issue as
  Pratyush.  After applying his patch, it fixed the problem.  The above
  test uncovered two different bugs, one in x86 and one in ARM and
  ARM64.  As this looked like it would affect PowerPC, I tested it on my
  PPC64 box.  It too broke, but neither the patch that fixed ARM or x86
  fixed this box (the changes were all in generic code!).  The above
  test, uncovered two more bugs that affected PowerPC.  Again, the
  changes were only done to generic code.  It's the way the arch code
  expected things to be done that was different between the archs.  Some
  where more sensitive than others.

  The rest of this series fixes the PPC bugs as well"

* tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled
  ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl
  ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl
  seq_buf: Fix seq_buf_bprintf() truncation
  seq_buf: Fix seq_buf_vprintf() truncation

Pull networking fixes from David Miller:

 1) nft_compat accidently truncates ethernet protocol to 8-bits, from
    Arturo Borrero.

 2) Memory leak in ip_vs_proc_conn(), from Julian Anastasov.

 3) Don't allow the space required for nftables rules to exceed the
    maximum value representable in the dlen field.  From Patrick
    McHardy.

 4) bcm63xx_enet can accidently leave interrupts permanently disabled
    due to errors in the NAPI polling exit logic.  Fix from Nicolas
    Schichan.

 5) Fix OOPSes triggerable by the ping protocol module, due to missing
    address family validations etc.  From Lorenzo Colitti.

 6) Don't use RCU locking in sleepable context in team driver, from Jiri
    Pirko.

 7) xen-netback miscalculates statistic offset pointers when reporting
    the stats to userspace.  From David Vrabel.

 8) Fix a leak of up to 256 pages per VIF destroy in xen-netaback, also
    from David Vrabel.

 9) ip_check_defrag() cannot assume that skb_network_offset(),
    particularly when it is used by the AF_PACKET fanout defrag code.
    From Alexander Drozdov.

10) gianfar driver doesn't query OF node names properly when trying to
    determine the number of hw queues available.  Fix it to explicitly
    check for OF nodes named queue-group.  From Tobias Waldekranz.

11) MID field in macb driver should be 12 bits, not 16.  From Punnaiah
    Choudary Kalluri.

12) Fix unintentional regression in traceroute due to timestamp socket
    option changes.  Empty ICMP payloads should be allowed in
    non-timestamp cases.  From Willem de Bruijn.

13) When devices are unregistered, we have to get rid of AF_PACKET
    multicast list entries that point to it via ifindex.  Fix from
    Francesco Ruggeri.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  tipc: fix bug in link failover handling
  net: delete stale packet_mclist entries
  net: macb: constify macb configuration data
  MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer
  MAINTAINERS: linux-can moved to github
  can: kvaser_usb: Read all messages in a bulk-in URB buffer
  can: kvaser_usb: Avoid double free on URB submission failures
  can: peak_usb: fix missing ctrlmode_ init for every dev
  can: add missing initialisations in CAN related skbuffs
  ip: fix error queue empty skb handling
  bgmac: Clean warning messages
  tcp: align tcp_xmit_size_goal() on tcp_tso_autosize()
  net: fec: fix unbalanced clk disable on driver unbind
  net: macb: Correct the MID field length value
  net: gianfar: correctly determine the number of queue groups
  ipv4: ip_check_defrag should not assume that skb_network_offset is zero
  net: bcmgenet: properly disable password matching
  net: eth: xgene: fix booting with devicetree
  bnx2x: Force fundamental reset for EEH recovery
  xen-netback: refactor xenvif_handle_frag_list()
  ...